S.R. to Taluka Seva Sadan at Bodeli Ta. Bodeli Dist. Chhotaudepur (Repairing of Paver block, Colour work, Toilet block, Drainage work & Electrification)

No. figures

1 Dismentaling doors, windows, ventilators etc. (wood or steel) 20.00 No. 196.66

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and lift.

(i) Not exceeding 3.00 Sq.m. in area.

2 Dismantling sanitary fittings like wash basin, W.C. pan Indian and 26.00 No. 424.10

European type, flushing tank etc. including stacking the materials

with all lead and lift.

3 Dismentaling tiled of stone floors laid in mortar including stacking 315.00 Sq.m. 50.28

of serviceable materials and disposal of unserviceable materials

with all lead and lift.

4 Providing and laying marble slab polished granite stone 20mm to 21.00 Sq.m. 3246.14

25mm thick black (single piece) for vertical wall / Doors /

Windows sill, jambs for cladding as per design including full

moulded round inside edge and laid in 10 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry

including rubbing, polishing and finishing etc. complete.

5 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse 76.00 Cum 4026.02

sand : 6 crushed stone aggregates 20mm nominal size) and curing

complete including cost of form work in (A) Wall Caps / Coping.

6 Providing and laying coloured glazed tiles of the size 300 mm x 315.00 Sq.m. 1523.67

200 mm x 8mm / 300mm x 450mm x 8mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

7 Providing and fixing standard extruded of Aluminium section of 2.00 Sq.m. 1175.56

size 63mm x 38.10 mm x 1.2mm (@wt. 0.643 Kg/mt.) with colour

anodized alluminium frame for ventilation with 5 mm thick frosted

glass as details etc. complete for Ventilation as directed by

Engineer in charge.

8 Providing and fixing Door of factory made & stamped I.S. 12823 32.00 Sq.m. 3975.36

grade one, type one 35 mm thick solid core, melamine faced,

three layered resin, flushed door, having decorative lamination on

both side including 30 cm long stainless steel pipe handle on both

side SS ASIS 304 Grade, SS stopper 20 cm, SS Aldrop 30 cm both

side, SS hinges 3 Nos. in each shutter & fixtures & fastenings as

directed by Engineer in charge etc. complete.

9 Providing and fixing Table top wash basin with pillar cock, 8.00 No. 4584.39

chromium plated, bottle trap and waste pipe, necessary couplings of

approved quality for wash basin.

10 Providing and fixing Urinal of approved quality including connection 6.00 No. 1674.15

with trap and with integral longitudinal flush pipe. (A) Squatting plate

pattern white earthenware 550mm x 300mm.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

11 Providing and fixing wash down Wall Hung water closet including 12.00 No. 9356.64

jointing the tap with SWR pipe including cistern, soft close seat

cover, internal fitting twin flush, outlet gasket for clair W/H W.C.,

inlet gasket & cantilever C.I. chair bracket and necessary fittings &

G.I. inlet connection for flush etc. complete as directed by Engineer

in charge.

12 Providing and fixing 600mm x 450mm beveled edge glass mirror 8.00 Each 859.41

of superior glass mounted on 6mm the A.C. sheet or plywood sheet

and fixed to wooden plugs with C.P. brass screws and washers.

13 Providing and fixing chromium plated flush cock of approved 12.00 Each 225.97

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as

directed by Engineer in charge.

14 Providing and fixing C.P. brass screw down stop cock of approved 14.00 Each 189.16

quality of 25mm dia. as approved by Engineer in charge with

adjustable wall flange.

15 Providing and fixing screw down bib taps of following size (B) brass 16.00 Each 214.81

chromium plated screw down bib tap (ii) 20mm dia. as directed by

Engineer in charge.

16 Jet spray heavy duty with S.S. Braided hose 60 cm long. 12.00 Each 308.99

17 Providing and fixing PVC SWR Gully trap 160 x 110. 20.00 Each 289.30

18 Providing and fixing Gun metal check or non-return fullway wheel 4.00 Each 360.35

valve. (C) 25mm dia. etc. complete as directed.

19 Providing, laying and jointing in true line and level I.S.I. mark 25 mm 50.00 Rmt. 91.84

dia. U.P.V.C. pipe (SCH- 40) for cold water including fittings as

approved by Engineer in charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent including cost of all

materials. 25mm dia.

20 Providing, laying and jointing in true line and level I.S.I. mark 40 mm 20.00 Rmt. 148.12

dia. U.P.V.C. pipe (SCH- 40) for cold water including fittings as

approved by Engineer in charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent including cost of all

materials. 40mm dia.

21 Providing, laying and jointing in true line and level I.S.I. mark 50 mm 25.00 Rmt. 195.67

dia. U.P.V.C. pipe (SCH- 40) for cold water including fittings as

approved by Engineer in charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent including cost of all

materials. 50mm dia.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

22 Providing, laying and jointing in true line and level I.S.I. mark 110 58.00 Rmt. 897.79

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm height at every

mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Total Rs.

i.e. Rs. Twelve lacs Sixty Four thousand Five hundred Eighty Eight and Twenty Two paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ____________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 5500.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Bodeli (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Bodeli Chhotaudepur Chhotaudepur