Repairing of L.T. Line Pole painting, Tightening of over head line Guarding and Repairing of LED street light and SF of 55 Nos LED Street light High Mast Pannel Cable and accessories and S/F of 7.5 H.P Submersible Pump, Starter Panel Column Pipe

S/F of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator (S.I. No. 621)

Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. (S.I. No. 622)

Supply and erection of "D" clamps of 50 mm × 6 mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (S.I. No. 623)

S/E of O/H lines with ACSR conductor `weasel' on poles including binding &jumpering complete in all respects (S.I. No. 627)

Tightening of O/H lines with ACSR conductor `weasel' on poles including binding &jumpering complete in all respects (S.I. No. 627 LR)

S/E of overhead line with G.I. wire on 8 SWG, GI wire on poles including binding complete in all respects (S.I. No. 628)

S/E of hexagonal / cradle type gaurd of G.I. wire no. 8 to 4 SWG including binding etc./ five line spacer between ACSR conductor complete in all respects (S.I. No. 629)

S/E of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects. (S.I. No. 631)

Painting of pole with 2 coats of Aluminum paint over Red Oxide primer complete in all respects. (S.I. No. 634)

S/B of 600 mm × 600 mm × 6 mm GI plate vertically for earthing with its top at least 3 m below ground level with 20 mm dia GI pipe & funnel for watering. One earthing lead of 1 No. 8-10 SWG GI wire in 15 mm dia G.I. pipe up to switch board (from apron to switch board, the cost of GI pipe & GI wire will be extra) 30 Cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per direction of E/I complete in all respect as per drawing For Pole (S.I. No. 702)