Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.8 L
EMD Value
₹20,000
Closing Date
13 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Neha Sinha
Power Grid Corporation of India Ltd, Eastern Region-II, Odisha Projects, Plot No.4, Unit No.41, Niladri Vihar, Chandrashekharpur, Bhubaneswar-751 021
Construction of Temporary O&M Store with Workshop at POWERGRID Keonjhar Sub-station .
ODP/BB/C and M-2839/I-2169/RFx-5006003636/22-23
Limited
Civil Works - Buildings
Works
Keonjhar
₹20,000
13 Sept 2022
20 Aug 2022
13 Sept 2022
20 Aug 2022
13 Sept 2022
20 Aug 2022
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth within premise, disposed earth to be levelled and neatly dressed,all work complete as per the Instruction of Engineer-In-Charge. - All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.all work complete as per the Instruction of Engineer-In-Charge.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.. as per the Instruction of Engineer-In-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)all work complete as per the Instruction of Engineer-In-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work as per the Instruction of Engineer-In-Charge. : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).all work complete as per the Instruction of Engineer-In-Charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level :cement mortar 1:4 (1 cement : 4 coarse sand)all work complete as per the Instruction of Engineer-In-Charge.
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand)
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Lintels,Chajja, beams, plinth beams, cantilevers etc..
Columns, Pillars, Piers, Abutments, Posts and Struts
Finishing walls with Acrylic Smooth exterior paint( weather proof)- APEX ULTIMA ASIAN PAINTS or equivalent make like Berger,Nerolac (Two or more coat ) of colour Grey,Blue, Brown, etc. of required shade with scrubbing , clean, preparing the surface of over priming coat of recommended exterior primer applied all complete as per instruction of EIC.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer like Birla white excel or equivalent, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete as per the Instruction of Engineer-In-Charge:Thermo-Mechanically Treated bars(Fe-500D or more). (Note:Chairs,spacer,lapping etc deemed to be included.No extra payment shall consider)
Providing and fixing precoated galvanised iron tile profile sheets or any morden architectural pattern (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.all work complete as per the Instruction of Engineer-In-Charge.
Flashings/ Aprons.( Upto 600 mm)
Barge board (Upto 300 mm)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying one or more coats of black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade all complete.as per the Instruction of Engineer-In-Charge.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying one or more coats of black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade all complete, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes all complete as per the Instruction of Engineer-In-Charge.
Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing PPGI gutters with purlins.
Providing & fixing glass panes of approved make like Saint gobain or as per EIC. with putty and glazing clips in steel doors,windows, clerestory windows,4.0 mm thick glass panes(weight not less than 10kg/sqm) all complete with :all complete; as per instrction of EIC.
Each Set
Each Set
Each Set
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
: Civil Works Package - :
2 or More
JV (Joint Venture)
Six (06) Months
Average annual turnover (in INR)
Details of Contract & Date
Tentative Completed date
Qualification
Ref/ Page No.
Ref/ Page No.
Ref/ Page No.
Ref/ Page No.
POWER GRID CORPORATION OF INDIA LIMITED,
Section
Clause No./ Page No.
Ref. and Page No.
Ref. and Page No.
Period in weeks (from the effective date of LOA)
Date of Retirement/ resignation from POWERGRID
Date of Retirement/ resignation from POWERGRID
Date of Retirement/ resignation from POWERGRID
Six (06) Months
Name of the published index
Wholesale Price Index Number for ‘High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Wholesale Price Index Number for ‘Ferrous Metals’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Wholesale Price Index Number for High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Wholesale Price Index Number for ‘Cement & Lime’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Wholesale Price Index Number for ‘Structural Clay Products’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
JV (Joint Venture)
FALSE
We have enclosed a Bid Guarantee in original and one copy in the form of Bank Guarantee (Bank Guarantee No.-, dated DD-MM-YYYY issued from ) for a sum of Rupees /-, Valid for a period of Seven [07] calendar months from the date of opening of bids i.e. upto and inclusive of DD-MM-YYYY.
EMD DETAIL FORM
Bank Guarantee No.
Name of Issuing Bank :
Clause No 13.0, ITB, Section -II and cl. 3.0 SCC, Section-IV, Volume-I
Clause No.64.0, Conditions of Contract (GCC) & Clause 11.0, SCC
Clause No.14,Section GCC, Vol.-I ,Conditions of Contract & Clause 12.0 of SCC, Section-IV, Vol-I & Clause 33.0 of ITB, Volume-I
Clause No 10.0 of SCC, Volume-I
Clause No 11.0 of ITB,
Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 8.0 of SCC, Volume- I
Clause No. 9.0 of SCC, Volume -I
Banks certified Cheque
Bank Guarantee
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Attachment 20- Affidavit for self-certification.DOCX
docx • 0.02 MB
Attachment-26 Declaration regarding events encountered pursuant to ITB Clause 2-1.docx
docx • 0.03 MB
Attachment-27.doc
doc • 0.04 MB
Bill of Material.xlsx
xlsx • 0.08 MB
First Envelope and Bid Forms.xlsx
xlsx • 0.65 MB
Drawings.pdf
pdf • 0.54 MB
SFQP.pdf
pdf • 1.62 MB
Technical Specification Civil.pdf
pdf • 2.30 MB
Thumbs.db
db • 0.11 MB
01 Invitation for Bids (IFB)-Section-I.docx
docx • 0.20 MB
02 Instructions to bidders(ITB)-Section-II.docx
docx • 0.30 MB
03 Bid Data Sheets (BDS)-Section-III.doc
doc • 0.25 MB
03A ANNEX-D(BDS)-Undertaking for Authenticity.DOC
doc • 0.05 MB
04 Conditions of Contract Civil Works.pdf
pdf • 0.39 MB
04A GCC Civil Amendments I - IX.pdf
pdf • 1.46 MB
05 SCC-Section-V.docx
docx • 0.11 MB
06 ANNEXURE-I, II ,III & IV of SCC.docx
docx • 0.04 MB
07 ANNEX-D (SCC) SA 8000 2008.pdf
pdf • 0.16 MB
GeM_Availability_Report.pdf
pdf • 0.03 MB
Bid_opening_Extension_I.pdf
pdf • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .