CO T1 Toilet VIP Toilet and T2 Toilet Officers Toilet at Parade Ground at RTC PGM

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-Charge. Ordinary rock

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for massconcrete )

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu?ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Centering and shuttering work for Lintel Beam and roofing

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

20 mm cement plaster of mix : 1:4 (1 cement : 4 Coarse sand)

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gms/litre

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of approved quality :

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 100 mm dia. R.C.C. pipe

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm

PProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) : 30 mm thick

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for light point/Fan point /call ball with 1.5 sqmm FRLS PVC onsulated copper conductor single core cable in surface /recessed steel conduit, with piano type switch , phenolic taminated sheet , suitable size MS box and earthing the point with 1.5 sqmm FRLS PVC insulated copper condutor single core ETC.Group B

Wiring for light/power plugwith 2X4 sqmm FRLS PVC copper conductor single core cable in surface /recessed steel conduit, 2 watt modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper condutor single core cable etc. as required.Inner side building

Wiring for light/power plug with 4x4 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit alongwith 2 Nos 4 sqmm FRLS PVC insulated copper condtor single core cable for loop earthing as required.Inner side building

Supplying and fixing brass batten/angle holder including connection etc. as required.

Supplying and fixing 5A to 32 A rating , 240/415 V , 10 K C' curve miniature circuit braker suitable for inductiveload of follwing poles in the existing MCB DB complete with connections, testing and commissioning etc ,as required. Single pole

Supplying and fixing 5A to 32 A rating , 240/415 V , 10 K C' curve miniature circuit braker suitable for inductiveload of follwing poles in the existing MCB DB complete with connections, testing and commissioning etc ,as required. dubble pole

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required.6 Module

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 5/6 A switch outet

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required.3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 15/16 amps switch

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm

Providing and fixing the Elan One Piece Toilet with UF Ezee close seat cover size (WxPxH) 400x700x780mm S-trap,220 & 300mm with all operations including all necessary materials with assesseries including complete fitting.

Providing and fixing toilet cubicle work with nylon block supply and istallation specification: A. 12 mm panel-1000 density-HDf-action tesa make B. Aluminium block coated u-profile. C. Aluminium block coated i-profile. D. Aluminium block coated h-profile. E. Aluminium block coated top rail. F. Nylon polyamide legs.G. Nylon polyamide hinges. H. Nylon polyamide hook.1. Nylon polyamide door lock.J. Nylon polyamide indicator knob, Toilet cubicles-aluminium anodised profile with nylon hardware as per measurement supply front 1350mm w X 2000mm h, Installation of each cubicle complete as per direction of Engineer-in-charge.

Providing and fixing toilet cubicle work with nylon block supply and istallation specification: A. 12 mm panel-1000 density-HDf-action tesa make B. Aluminium block coated u-profile. C. Aluminium block coated i-profile. D. Aluminium block coated h-profile. E. Aluminium block coated top rail. F. Nylon polyamide legs.G. Nylon polyamide hinges. H. Nylon polyamide hook.1. Nylon polyamide door lock.J. Nylon polyamide indicator knob, Urinal partition 900mm h X 450mm w supply & installation with each urinal complete as per direction of Engineer-in-charge.

Providing and fixing LED tube light complete set

Providing and fixing Brass batten/ angle holder

Providing and fixing LED blub

Providing and fixing SS automatic hand dryer moderate specs

K arjun kumar (BID ID -3331519)