INTERNAL ELECTRIFICATION WORK OF MAHILLA BARRACK AT POLICE LINE ROSHNABAD HARIDWAR.

Amount

WGPVCPT Point wiring in PVC conduit, with piano type switch: wiring for ligh recessed PVC conduit, with piano type switch1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing 5/6 A piano type switch on the existing switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin 5/6 A socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

WGPVCSB Circuit/sub-man wiring in PVC conduit with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduitas required. 2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduitas required. 2 x 4 sq. mm + 1 x 4 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduitas required. 4 x 10 sq. mm + 2 x 6 sq mm earth wire.

S&F of 6 to 32 amp MCB.

S&F of 63 amp F.P isolator ".

S&F of 6 to 16 amp Tripal Pole MCB ".

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 16 kA,TPMCCB

Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing 4 way (4 + 12), Double door , horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

S&F of electronic type fan Regulator complete in all respects..

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

S&F of angle holder.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

S&F of 100 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge.

Supply and laying of aluminium conductor PVC insulated cable 1100 Volts grade 50 sq. mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated cable 1100 Volts grade 35 sq. mm 3-1/2 core

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT-AA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30 watt to 40 Watt. Confirming to IP66 Protection complete in all respect. CAT (AA).

Supply and fixing of 16 gauge M.S. drum dulypainted including making hole in the wall for exhaust fan and finishing properly complete in all respect.

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

supply and fixing of ceiling fan approved make of Bajaj/Khaitan/orient/Hevells etc, complete in all respects.

supply and fixing of Exhaust fan approved make of Bajaj/Khaitan/orient/Hevalls etc, complete in all respects.

Divyansh Electrical Enterprises