Constructing New 11kV feeder from 110kV Substation, Edappally using 3x300 sqmm XLPE UG cable under Electrical Section, Cheranalloore

UG cable 11kV 3X300 mm2 XLPE Aluminium (Armoured)

RMU -11kV- 630 A -CCCCT (E) + DA + M With FRTU or (CCCCV+ +DA+M) With FRTU or (RRRRL + +DA+M) With FRTU

Ring Main Unit-11 kV 630 A -Bus Coupler + DA

Description of Work / Item(s)

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Laying of 11KV UG Cable by Horizontal Directional Drilling method

Providing and laying in position cement concrete of specified grade excluding the cost for centering and shuttering - All work up to plinth level :1:2:4 ( 1cement : 2 coarse sand (zone -III) :4 grade stone aggregate 20mm nominal size)

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.

HDPE pipe supply and positioning at the time of mounting

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

RMUs with two nos load break switches & one VCB

RMU foundation suitable for CCT, CCCT types with Elevated Transformer plinth

RMU Bus Couplers / Add-On units with Load Break switch(s) & Earth switch

Coupling of Busbars

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Re-joining one snapped HT conductor after removing damaged portion incl. re-tensioning and conveyance of all materials complete.

Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil.

Description of Work / Item(s)

Amount

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Fathima Engineering Co. Pvt. Ltd. (BID ID -2057066)

ADDYUTHIYA POWER PROJECTS PRIVATE LIMITED (BID ID -2064149)

Fathima Engineering Co. Pvt. Ltd. (BID ID -2057066)

ADDYUTHIYA POWER PROJECTS PRIVATE LIMITED (BID ID -2064149)

Fathima Engineering Co. Pvt. Ltd. (BID ID -2057066)

ADDYUTHIYA POWER PROJECTS PRIVATE LIMITED (BID ID -2064149)

RMU Bus Couplers / Add-On units with Load Break switch(s) & Earth switch

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.