SPECIAL REPARING OF 200 HARD CORE CELL BUILDING & AUDITORUM BUILDING, AT OLD SABARMATI CENTRAL JAIL AHMEDABAD (INCLUDING ELECTRICAL WORK) (first attempt)

NAME OF WORK :- SPECIAL REPARING OF 200 HARD CORE CELL BUILDING & AUDITORUM BUILDING, AT OLD SABARMATI CENTRA

AHMEDABAD INCLUDING ELECTRICAL WORK

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall / 19126.00 SMT 19.38 Rs. Ninteen & Paise Thirty 3 70

1 R.C.C member including stacking of serviceable material and disposal of Eight Only

unserviceable from site of work with all lead and lift

Scraping oil paint from steel and other metal surface and making the surface even 884.00 SMT 48.83 Rs. Forty Eight & Paise 43

2 (with Hand Scraping.) Eighty Three Only

Removing dry or oil bound distemper by a washing and scrapping and sand 2600.00 SMT 12.77 Rs. Twelve & Paise 33

3 papering the ceiling surface smooth including necessary repairs to surface scratches Seventy Seven Only

Removing dry or oil bound distemper by a washing and scraping and sand papering 8035.00 SMT 11.19 Rs. Eleven & Paise 89

4 the wall surface smooth including necessary repairs to scratches complete. Ninteen Only

Dismentaling tiledof stone floors laid inmortar including stacking of serviceable 2727.00 SMT 47.25 Rs. Forty Seven & Paise 1 28

5 materilas and disposal of unserviceable materials with all lead and lift. Twenty Five Only

Dismantling santtary fittings like wash basin.W.C.pan Indian and European type, 216.00 NOS 401.63 Rs. Four Hundred One & 86

6 flushing tanketc.including stacking the materials with all leadand Paise Sixty Three Only

Removing and Dismantling the existing water tank, including disconnection of inlte, 24.00 NOS 1000.00 Rs. One Thousand Only 24

outlet, overflow and drain pipe connections, dismentling of RCC/masonry/plaster and

other connected portions wherever required, carefully lowering and removing the

dismantled materials without causing damage to the adjoining structure, loading and

7 disposing of unserviceable debris at an approved location, stacking serviceable,

materials as directed by the Engineer-In-Charge, and cleaning the site after

completion. The rate shall include all necessary labour, material scaffolding and safety

arrangements required for complete the work.

Demolition & disposal of unserviceable material with disposing all lead and lift 6.00 CMT 1047.38 Rs. One Thousand Forty 6

8 (i)reinforced cement concrete Seven & Paise Thirty Eight

Demolition of Brick work and stone masonry including stacking of serviceable 4.00 CMT 544.95 Rs. Five Hundred Forty 2

9 materilas and disposal of unserviceable materials with all lead and lift. (ii) In Cement Four & Paise Ninety Five

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and laying Controlled cement concrete M-200 finishing smooth with curing 4.00 CMT 8018.24 Rs. Eight Thousand 32

etc.complete Including the cost of form work of Plywood only with fair finish & Proping Eighteen & Paise Twenty

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement Four Only

10 for R.C.C. work in SLAB having thickness of 10cm and upto 13cm for GROUND

FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make &

In Proportion As Per Mix Design.

Providing and laying Controlled cement concrete M-200 and finishing smooth with 2.00 CMT 8720.02 Rs. Eight Thousand Seven 17

curing etc.. completeIncluding the cost of form work of Plywood only with fair finish & Hundred Twenty & Paise

Proping must be of steel only so as to give a fair finish. but exculding the cost of Two Only

11 reinforcement for BEAMS having any cross sectional area for FIRST FLOOR.Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As

Per Mix Design.

Providing T.M.T, FE - 500D Bar Reinfor Cement for R.C.C.work including cutting, 393.00 KG 75.46 Rs. Seventy Five & Paise 29

12 bending, binding and placing in position etc.complete for All Floors. (Brand as Forty Six Only

approved by GSPHC)

BRICK WORK using common burnt clay building bricks having crushing strength not 9.00 CMT 4253.46 Rs. Four Thousand Two 38

less than 35 Kgs. / Sq. cm. In Super structure above plinth level upto floor two level. Hundred Fifty Three &

13 Conventional bricks in Cement Mortar (1:6) (1 Cement : 6 coarse sand) for Paise Forty Six Only

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior 1970.00 SMT 199.88 Rs. One Hundred Ninety 3 93

14 plastering and finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including Nine & Paise Eighty Eight

finishing with floating coat of neat cement at Ground Floor. Only

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE 9447.00 SMT 203.34 Rs. Two Hundred Three & 19 20

wall for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 Paise Thirty Four Only

15 sand ) including finishing with floating coat of neat cement slurry at Ground Floor.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground 7709.00 SMT 297.68 Rs. Two Hundred Ninety 22 94

level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm Seven & Paise Sixty Eight

16 thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.) Only

Provinding 10mm thick WATER PROOF cement plaster in single coat on fair side 492.00 SMT 183.13 Rs. One Hundred Eighty 90

brick work or concrete wall for interior plasering upto floor to level and finishing even Three & Paise Thirteen

17 smooth in cemente mortar 1:3 (1 cement :3 sand) finished with floting coat of neat Only

cemente slurry incl. provinding and mixing water proofing materials in proportion

recommended by the manufacturersfor All Floors.

Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint 492.00 SMT 110.70 Rs. One Hundred Ten & 54

treatment treatment in two coats of vertical and horizontal surface of depressed Paise Seventy Only

18 portion of Bath/W.C. as directed by engineer in charge.This treatment shall be carried

out over & above water proofing plaster.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 1792.00 RMT 23.45 Rs. Twenty Three & Paise 42

19 including neat cement finishing, watering etc. complete. Forty Five Only

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4- 492.00 SMT 348.08 Rs. Three Hundred Forty 1 71

20 graded stone aggregate 20mm nominal size) laid in one layer and finished with a Eight & Paise Eight Only

floating coat of neat cement. (B) 50mm thick.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring 118.00 SMT 1440.20 Rs. One Thousand Four 1 69

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Hundred Forty & Paise

surface orfixing on existing flooring by adhesive including dismentaling of existing Twenty Only

21 flooring and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for 12.00 SMT 1392.20 Rs. One Thousand Three 16

skirting,risers of steps and dedo over 20 mm (average) base of cement mortar 1:6 ( Hundred Ninety Two &

1 cement: 6 coarse sand) on new surface orfixing on existing flooring by adhesive Paise Twenty Only

22 including dismentaling of existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for light shade

Providing & Laying 24"x24" vitrified 8 mm thick tile flooring over 20mm (average) 13.00 SMT 1383.89 Rs. One Thousand Three 17

base of cement mortar 1:6 ( 1 cement : 6 coarse sand)on new surface or fixing on Hundred Eighty Three &

23 existing flooring by adhesive material including dismentaling of existing flooring and Paise Eighty Nine Only

jointed with color cement slurry including finised with flush pointing & cleaning the

surface etc.complete for antiskid

Providing and laying Ceramic tiles 8 mm to 10mm thick in skirting, risers of steps 55.00 SMT 1028.11 Rs. One Thousand Twenty 56

and DADO on 10mm thick cement mortar 1:3 (1-cement: 3 coarse sand) finished with Eight & Paise Eleven Only

24 flush pointing in the colour as specified etc. complete in white cement for All Floors.

Size and shade shall be as per the instruction of Engineer - In - Charge. The Tile size

shall be 600mm x 300mm.

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs 8.00 SMT 2428.00 Rs. Two Thousand Four 19

and sills of doors & windows using neat cement slurry laid over 20 mm average base Hundred Twenty Eight

of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry Only

25 including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and

tackles,scaffolding etc. complete(with base of neat cement) as per direction of

Engineer in charge including rounding the exposed edges as directed. including fixing

with used of adhesive

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in 495.00 SMT 960.47 Rs. Nine Hundred Sixty & 4 75

Floorings, treads of steps and landing laid on a bed of 20 mm thick cement mortar 1:3 Paise Forty Seven Only

26 (1 - cement: 3- coarse sand) finished with flush pointing in the colour as specified etc.

complete in white cement for All Floors. Size and shade shall be as per the instruction

of Engineer - In - Charge

Provinding & laying Coloured GLAZED TILES 8 mm to 10 mm thick in skirting, 1905.00 SMT 1426.95 Rs. One Thousand Four 27 18

risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse Hundred Twenty Six &

27 sand ) finishing with flush pointing in the colour as specified etc.completion white Paise Ninety Five Only

cement for all floors size and shape shall be as per the instruction of engg.incharge the

tile size shall be 600 mm x 300 mm

Providing & Laying integrated cement based proprietary water proofing treatment of 133.00 SMT 855.11 Rs. Eight Hundred Fifty 1 13

required thickness over the roof including 10mm thick cement mortar 1:3 and CHINA Five & Paise Eleven Only

28 MOSAIC fitting and finally finishing the surface with white cement slurry and sloping

out terrace slabs with

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Following specification laid to required slope not flatter than 1:80 ( the thickness of

water proofing treatment near rainwater outlet or the lowest point of the finished slope

shell not to be less than 45 mm. Including treating the vertical surface of the parapet

wall up to 20 cm. height above finished level of terracing including finishing top with

joint less water proofing plaster curing testing etc, completed. Rate is Including

years performance of guarantee bond to be given on stamp paper ( no extra shall be

paid for increase in thickness for proper slope ). (A) Applying & grounting a slurry coat

of neat cement using 2.75 kg/smt. of cement admixed with proprietary water proofing

compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster in

cement mortar in 1:3.over the RCC slab including cleaning the surface before

(B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size with

50% of cement mortar 1:4 ( 1 cement : 4 corse sand )over 10mm. thick water proofing

cement plaster in cement mortar in 1:3 admixed with proprietary water proofing

compound conforming to IS 2645 required slope and treating similarly the adjoining

walls up to 200 mm height including rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less

cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing

compound confirming to IS 2645 and finally finishing the surface with trowel with neat

cement slurry .

(E) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing for final test. All above operation to be done in order and as

directed and specified by the engineer in charge.

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop 4570.00 SMT 186.73 Rs. One Hundred Eighty 8 53

Surface (two coats) to give an required shap even shade after throughly brushing the Six & Paise Seventy Three

surface to remove all dirt and remains of loose poweder material etc. complete. Rate Only

29 are inclusive of applying two coat of lapy (Putty) and one coat of primer on new

Ceilling/Slop Surface to give and even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered

smooth.putty,primer & paint shall be as per approved list of GSPHCL

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an 17482.00 SMT 176.33 Rs. One Hundred Seventy 30 82

required shap even shade after throughly brushing the surface to remove all dirt and Six & Paise Thirty Three

remains of loose poweder material etc. complete. Rate are inclusive of applying two Only

30 coat of lapy (Putty) and one coat of primer on new wall surface to give and even shade

including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth. putty,primer & paint shall be as per approved list of

Finishing wall with weather proof exterior emulsion paint on wall surface (two 7709.00 SMT 147.68 Rs. One Hundred Forty 11 38

coats) over and above applying One Coat Of Primer to give an required shape even Seven & Paise Sixty Eight

31 shade after thoroughly brushing the surface to remove all dirt, and remains of loose Only

powdered materials.etc complete. primer and paint make as per the approved list of

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Painting TWO coats (excluding priming coat) on previously printed steel and 899.00 SMT 87.26 Rs. Eighty Seven & Paise 78

32 other metal surface with synthetic enamel paint, brushing to give an even shade Twenty Six Only

including cleaning the surface of all dirt, dust and other foreign matter.

Painting two coats (excluding priming coat) on perviously painted Wood and 19.00 SMT 106.96 Rs. One Hundred Six & 2

33 wood based surfaces with enamal paint brushing to give an even shade including Paise Ninety Six Only

cleaning the surface of all dirt, dust and other foreign matter.

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) 12.00 RMT 165.21 Rs. One Hundred Sixty 1

pipe having National sanitation foundation ( NSF) seal for potable water of following Five & Paise Twenty One

dia. Nominal bore tube fittings and clamps including, making good the wall,ceiling and Only

34 floor etc complete.Pipe shall be concealed or open as per mentioned in tender

description.Pipe shall be approved make of GSPHCL list 15mm inside dia.

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) 300.00 RMT 202.97 Rs. Two Hundred Two & 60

pipe having National sanitation foundation ( NSF) seal for potable water of following Paise Ninety Seven Only

dia. Nominal bore tube fittings and clamps including, making good the wall,ceiling and

35 floor etc complete. Pipe shall be concealed or open as per mentioned in tender

description. Pipe shall be approved make of GSPHCL list (20 mm inside dia)

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 1002.00 RMT 437.66 Rs. Four Hundred Thirty 4 38

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Seven & Paise Sixty Six

following dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Only

36 Dia U Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or

open as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list (40 mm inside dia).

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 16.00 NO 656.86 Rs. Six Hundred Fifty Six 10

VALVE 40 mm dia. Rate are inclusive of all materials, Labour & Necessary Fittings & Paise Eighty Six Only

37 etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. All material used as per approved make list by GSPHCL. 40 mm

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' 375.00 RMT 495.91 Rs. Four Hundred Ninety 1 85

Ring 110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double Five & Paise Ninety One

'Y' with door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Only

38 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at

every 1.50mt. vertical distance including All Labour Charges etc. complete and making

good the Wall, Ceiling and Floor.(TYPE-B)

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' 375.00 RMT 264.97 Rs. Two Hundred Sixty 99

Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' Four & Paise Ninety Seven

with door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge Only

39 (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every

1.50mt. vertical distance including All Labour Charges etc. complete and making good

the Wall, Ceiling and Floor. (TYPE-B)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & Fixing to Wall Ceilling and Floor SWR (TYPE-A) Rain Water pipe as Per 235.00 RMT 323.15 Rs. Three Hundred Twenty 75

IS-13592 of 90mm Dia. Complete with Special Flings, Compressor type Fittings like Three & Paise Fifteen Only

G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U

Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour

40 Charges etc. complete including making good the Ceilings, Floors and on terrace. Rain

water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend

at the end near by Ground level. Rate are Inclusive of all Necessary Fittings required

for ALL FLOORS.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with 400.00 NO 565.43 Rs. Five Hundred Sixty 2 26

41 jali of the following nominal diameter of self cleansing design with C.I scread down or Five & Paise Forty Three

hinged grating including the cost of cutting and making good the walls. Only

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib 438.00 NO 184.98 Rs. One Hundred Eighty 81

42 tap polished bright. (i) 15mm dia. Four & Paise Ninety Eight

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 219.00 NO 1321.52 Rs. One Thousand Three 2 89

43 580mm first quality including necessary "P" or "S" trap, including jointing the trap with Hundred Twenty One &

pan & soil pipe in viterous chine white colour, Joints shall be pipe sealent. Paise Fifty Two Only

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste 1.00 NO 2098.98 Rs. Two Thousand Ninety 2

coupling with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all Eight & Paise Ninety Eight

44 matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Only

Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Urinal Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher 2.00 NO 3935.33 Rs. Three Thousand Nine 7

union, P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Hundred Thirty Five &

Trap with Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate are Paise Thirty Three Only

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed

45 Drawings, Specifications and as per the Instruction of Engineer In charge. The Model

& Make of Wash Basin Shall be as per the Approved Make List of GSPHCL. including

pillar cock, angel cock, bottale trap

Providing & fixing in position ISI marked Rotational moulded Polyethylene double 40000.00 LITER 3.91 Rs. Three & Paise Ninety 1 56

layer cylindrical vertical storage tank (IS : 12701) water tank size inlcuding making One Only

inlet and outlet. Over flow and washout arrangement with G.I. connection inlcuding

46 using necessary M.H. for connection etc. complete with closed cover including

applying two coats of oli painting outside the tank etc.complete.

Providing & fixing precast R.C.C. Frame with Cover MD 10 Ton (Rubber Mould 60.00 NO 1702.00 Rs. One Thousand Seven 1 02

47 Finish) inner Size 600 x 450mm with all Necessary Fittings Hundred Two Only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Rebarring Drilling holes of min 4mm larger than new rebar diameter into existing 94.00 NOS 166.75 Rs. One Hundred Sixty Six 15

concrete substrate for anchoring of new rebar and depth of Min. 10 times the diameter & Paise Seventy Five Only

of rebar and fixing with anchor resin grout Lokfix E (35/55) series or Lokfix P or

chemical anchor material or Masterflow 916AN of BASF or equivalent including

48 cleaning, cutting, fabricating, chemicals, material, labour, tools, temporary supports for

structures, plant and machineries etc. complete as directed by Engineer-in-charge

and/or consultant for all heights (for 12 mm Dia. of steel reinforcement)

TOTAL CIVIL COST(A) 1 63 66

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

ELECTRICAL WORK

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm 1030.00 Point 428.00 RS: Four Hundred 4 40

copper PVC insulted FRLSHH wire with 1.5 sq. mm (green) copper PVC insulated Twenty Eight only

FRLSHH wire for earth continuity in existing pipe with approved make 5/6 Amp. ISI

make modular type switch and accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules erected on wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector (make and

model approved to be approved by EIC) as directed for open/concealed pipe

49a wiring.Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise

payment will not be done for extra long point. (For future extention, if required, agency

has to erect one higher size metal box and modular plate as per instruction of EIC.

Cost of blank plate shall be paid as per tender item) [Wire must be having box packing

in existing pipe erected flushed on wall/ceiling complete Light point. Cat.-II.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to

prevent mortar going into the box. Length of point wiring must not increase than

mtr. For that necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long point. (For

future extention, if required, agency has to erect one higher size metal box and

modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender

item) [This item include cleaning (inside/outside) of all G.I. switch boards, electric point

box, fan box, MCBDB & box cutting plaster finishing for modular plate without any gap]

[conductor resistance should be as per IS:8130/1984]

For Secondary Light Point Cat-II( in existing pipe) 60.00 Point 106.00 RS: One Hundred Six 6

Fan Point erected with 6A Modular type switch and hum free EME step type electronic 55.00 Point 632.00 RS: Six Hundred 34

49c fan regulator mounted ( in existing pipe cat.II) Thirty Two only

For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI Make) Cat-II ( 40.00 Point 465.00 RS: Four Hundred 18

49d in existing pipe) Sixty Five only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) (Cat-II) ( in existing 80.00 Point 295.00 RS: Two Hundred 23

49e pipe) Ninty Five only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 40.00 Point 629.00 RS: Six Hundred 25

x 2.5 sq.mm copper PVC insulated FRLSHH wire with 1.5 sq.mm (green) copper PVC Twenty Nine only

insulated FRLSHH wire for earth continuity in FIA approved ISI mark in existing pipe

with PVC fitting fixed with adhesive solution erected in wall/slab along with continuous

G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe & boxes

shall be filled with cement mortar & finishing the surface to match the wall / ceiling

50 complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic box covered with appropriate front plate modules erected

flushed with wall. For 16 Amp. Indicator switch & 1 No. 6/16 A universal socket white

colour suitable for 3/5 pin top duly both having ISI mark. (Necessary sheet / tape /

polythene / sand must be erected or filled in all box To Prevent Mortor Going In To The

Box) Cat.-II. (Conductor resistance should be as per IS:8130/1984)

Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 1.00 Point 808.00 RS: Eight Hundred

sq.mm copper PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC Eight only

insulated FRLSH wire for earth continuity in FIA approved ISI mark in existing pipe

with PVC fitting fixed with adhesive solution erected in wall / slab along with continuous

G.I. fish wire to draw wires and laid in approved manner. zari for PVC pipe & boxes

shall be filled with cement mortar & finishing the surface to match the wall / ceiling

51 complete with approved make 20 Amp. Modular type indicator switch and accessories

mounted in 20 SWG GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall / ceiling. (a) 20 Amp Indicator switch &

No. 20 A universal socket white colour suitable for 3 pin top duly both having ISI mark

(A.C POINT ONLY) CAT II (Necessary sheet / tape / polythene / sand must be erected

or filled in all box to Prevent Mortor Going In to The Box)

Providing following type of Modular Type Accessories mounted with 20 G company 180.00 Each 124.00 RS: One Hundred 22

fabricated metalic box, single mounting base frame covered with textured / metallic Twenty Four only

front plate, modules erected with necessary connection. As desired by Engineer in

charge. For One No. SP 6 Amp Cat-II

For One No 5 pin plug Cat-II 70.00 Each 124.00 RS: One Hundred 8

Twenty Four only

For Electronic hum Free steps EME Fan regulator Cat-II 30.00 Each 338.00 RS: Three Hundred 10

Thirty Eight only

For Blank Plate Single Cat-II 70.00 Each 16.00 RS: Sixteen only 1

For 16 Amp. SP one way switch Cat-II 15.00 Each 130.00 RS: One Hundred 1

For 6/16Amp. Universal socket Cat-II 15.00 Each 139.00 RS: One Hundred 2

Thirty Nine only

For Computer RJ-45 socket Cat-II 5.00 Each 139.00 RS: One Hundred

Thirty Nine only

For RJ-11 Telephone Socket Cat-II 5.00 Each 130.00 RS: One Hundred

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing, erecting, fabricating the M.S. structure as per requirement of site as per 350.00 kg 77.00 RS: Seventy Seven 26

structure design Including proper size approved by EIC of M.S. angles, flats, bars, only

square pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality

53 oil paint and true care red oxide metal primer,asian paint make with erection on site as

per direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 7.00 Sq. Mtr. 2289.00 RS: Two Thousand 16

25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and Two Hundred Eighty Nine

54 energy meter (contractor shall make approved drawing of Bakelite sheet To arrange only

required No. of Energy meter & ICDP switch -busbar etc. as per Actual space available

in electrical room at site)

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be 7000.00 Sq. Inch 5.94 RS: Five and Paise 41

55 concealed in wall with necessary plastering & finishing covered with 3mm thick Ninty Four only

Laminated sheet with grooving as directed of following depth. 3" Depth

Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed 2500.00 Sq. Inch 3.00 RS: Three only 7

Providing and erecting Medium Class FIA approved and ISI mark white colour 1200.00 Mtr. 24.00 RS: Twenty Four 28

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC only

fittings & Junction boxes fixed with adhesive solution. concealed in wall / slab along

with continuous fish wire to draw mains, laid in approved manner. Zari for PVC Pipe &

Boxes shall be plastering by cement mortar & finishing the surface to match the wall /

ceiling. For 20 mm dia.

For 25mm dia. 1300.00 Mtr. 33.00 RS: Thirty Three 42

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 1200.00 Mtr. 22.00 RS: Twenty Two 26

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per only

IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in

joint & erected on wall / ceiling of following size . For 20 mm dia.

For 25 mm dia. 1300.00 Mtr. 31.00 RS: Thirty One 40

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 300.00 Mtr. 424.00 RS: Four Hundred 1 27

chloride rigid material with ignition free & flame proof confirming BS .All necessary Twenty Four only

accessories and measuring of following sizes. For 100 mm x 50 mm trunking (MK,

LEGRAND, OBBO make Only])

For 50 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only]) 300.00 Mtr. 187.00 RS: One Hundred 56

Eighty Seven only

Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with 150.00 Mtr. 31.00 RS: Thirty One 4

60 necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with 150.00 Mtr. 37.00 RS: Thirty Seven 5

61 necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and erecting Steel cover as per drawing using 16 SWG M.S.sheet of 5.00 Sq. Mtr. 2535.00 RS: Two Thousand 12

following depth, to house the switch gear etc. complete with locking arrangement and Five Hundred Thirty Five

62 lock with duplicate keys per cupboard and door handles erected with necessary only

support and painting. [One coat red oxide and two coat enamel paint] Without angle

iron frame For 25 cms. Depth

Providing & Erecting Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV grade 1500.00 Mtr. 60.00 RS: Sixty only 90

with FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC

casing capping with PVC fitting fixed with adhesive solution to be erected on/in brick

wall / slab along with continuous G. I. fish wire to draw mains laid in approved manner

with plastering by cement mortar & finishing the surface to match the wall / ceiling

63a complete with FRLSH PVC insulated wire for earth continuity. (Approved ISI make

only) For 2 x 1.5 sq.mm. FRLSH copper multi stranded conductor mains with

sq.mm. FRLSH copper multi stranded conductor for earthing as per standard colour

code. -In Existing Pipe[Wire must be having box packing]

For 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. 750.00 Mtr. 81.00 RS: Eighty One 60

63b FRLSH copper multi stranded conductor for earthing as per standard colour code. -In only

Existing Pipe[Wire must be having box packing]

For 2 x 6.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. 750.00 Mtr. 157.00 RS: One Hundred 1 17

63c FRLSH copper multi stranded conductor for earthing as per standard colour code.-In Fifty Seven only

Existing Pipe [Wire must be having box packing]

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage 185.00 Each 370.00 RS: Three Hundred 68

Mashroom shape 0.2W to 0.5W assemble on single MCPCB with housing use as a Seventy only

heat sink shall be made from white powder coating Aluminum extrusion having enough

strength (sample must be approved by EIC)with polycarbonate diffuser with following

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

64 (I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV (N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to

hold the fitting erected on wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be given

strictly subject to item specification]

Providing and erecting max. 10 watt LED battern having main housing having powder 7.00 Each 309.00 RS: Three Hundred 2

coated aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & Nine only

photomatry parameters are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥

0.95, system luments min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤ 15%,

delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70, Electronic CC driver,

65 3 core insulated copper wire for internal wiring, IP20, operating voltage: 160 to 270 V,

Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty design & strength should be

sufficient to hold the fitting erected on wall or ceiling,Length of fitting should be

min.600mm,3 core x 0.5 Sqmm copper wire with min. 1ft (300mm) & earthing

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 32.00 Each 111.00 RS: One Hundred 3

voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven only

66 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

SITC of Indoor Commercial recess/surface mounted (IP20) Max. 12 w Cool/warm 410.00 Each 853.00 RS: Eight Hundred 3 49

white Color LED Down lighter office Lighting Luminaire with external separate driver Fifty Three only

having BIS certification with fully die cast aluminium alloy housing without any

PVC/Plastic part with corrosion resistant powder coated finish as a heat sink with Poly

Carbonet diffuser LED complete (only from Philips Lumileds, CREE, BridgLux, Seoul,

Nichia & Osram CRI > 80, CCT 5600K (5400 to 5800K bin). The led's should be

mounted on Metal core based PCB for better heat conduction and long life of LED.

(LM 79 for complete fixture, LM80 for individual LED Report mustbe submitted) The

fixture should have extra protection of driver like over/under voltage, THD<15%,

67 P.F.>0.90, for 12 w fixture wide voltage range from 100 to 270 V, 50/60 HZ, 4 KV

surge protection.Fixure must have Min. 1620 Lumens light output. Fixture Efficacy

should be>=90 Lumens/watt. (L70 @ 30,000 Hrs) The Fixture should be able to easily

mount on POP/Grid False cieling. The Luminiare should be tested as per IP20

standards and following test reports should be submittedat the time of approval. Model

Approved By EIC as per Specification only (Note:- The manufacturer/authorized

Channel partner/dealer of the manufacturer has to give a 5 yrs. free replcement

Guarantee for complete Fixture)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 6.00 Each 1777.00 RS: One Thousand 10

assembled on single MCPCB, with housing used as a heat sink shall be made of thick Seven Hundred Seventy

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated Seven only

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

68 Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing complete.IP20 For 36 watts,

24" x 24", Surge- 2kV

Supplying and erecting approved make 200mm sweep low noise decorative exhaust 2.00 Each 1353.00 RS: One Thousand 2

fan having Aerodynamically designed and Blanced Blade, Blade finish Opaque,body Three Hundred Fifty Three

colour White , finish Glossy , Rated Speed 1800 revolution per minute ,air delivery only

500m³ / hr , noise level 50 dB , Power Consumption 35 W, ,Rated Voltage 230 V

no. of blades 7 , guard 18 Louvers , square frame ABS body with inbuilt lowers and

square frame.( Havells Make Ventilair LX or Bajaj, Usha, Crompton and Equivalent

Model Approved by EIC subject to Above Specification )

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supplying & erecting approved make low noise exhaust fan having size 305 mm with 220.00 Each 2034.00 RS: Two Thousand 4 47

900 RPM with round frame metalic body with Metalls Grill having follwing Thirty Four only

specification (1)Type of Motor: capacitor start & run induction motor:4 Pole,(2)Winding

Material: Super Enamelled Copper wire,(3)Class of Insulation:"E",(4)Rating

Volatege: 220-240 V,Single Phase A.C,(5)Test voltage:230V,(6)Rated

Frequency:50Hz,(7)Rated Power:55W(+- 10%),(8)Rated Speed:900RPM(+-

10%),(9)Power Factor:0.90Min,(10)Air Delivery: 1275Mtr3/Hour,(11)Temperature

Rise:75C Max,(12)Low Voltage Starting:195V(Max),(13)IP 55-Dust Proof and water

70 resistance,(14)Can work contiously 16Hrs,(15) Top-Thermal overload protector-

Prevent burning of motor in case of temp rise,(16) Z type shielded double ball bearing-

noise less opration maintance free,(17)7 tank process color-So Corrosion less

body,(18) Aerodynamically blades handling maximum air with minimum Power

consumption,(19)Confirming to IS 2312:1967. (Crompton

,Usha,Havell's,Orient, Bajaj make & model subject to tender specification agency

has to approved model before purchasing) Cat-II

Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 5.00 Each 780.00 RS: Seven Hundred 3

watt Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And Eighty only

71 lumen output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool

white (3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg

C working temperature, AL frame with Beam Angle 120 deg.

Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, 50.00 Each 2603.00 RS: Two Thousand Six 1 30

Max. 30Watt Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite Hundred Three only

magnet Motor, class of insulation: B/E, Double ball bearings, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 7.5, Air delivery

minimum 220 CMM, Minimum 345 RPM,230v (tolerance as per IS : 374-2019), THD <

10%, compitible with electronic regulator unit for Five Speed Control and all remaining

72 accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current

and overload protection , 50 Hz, Single phase AC Supply, earthing, Down road: up to

1.0 mtr as per site tequirment etc. Complete as required.[ Make shall be approved by

Engineer in Charge] (A) 1200 mm Sweep (48") ( Make - Havells Efficiencia Dx , Bajaj

Energos 28 & Crompton make & model approved by EIC suject to above specification

Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod 65.00 Mtr. 107.00 RS: One Hundred 6

erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible wire Seven only

with earthing. The down rod thickness, hole, locking arrangement, construction,

powder coating, colour shed should be same as original down rod brought with ceiling

73 fan. For that agency has to give original down rod sample to fabricator and one sample

down rod should be approved with EIC. After approval given by EIC agency can use

the down rod as per approved sample. If without approval down rod will be erect on

site, agency has to replace them with own cost.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts 50.00 Each 98.00 RS: Ninty Eight 4

74 erected with necessary hook of 10 mm M.S. Round Bar. only

Supplying and erecting approved make Cabin fan of 230V. A.C. 50 Cy/s. 400 mm. 210.00 Each 1527.00 RS: One Thousand 3 20

75 sweep oscillating type complete erected with lead wires as directed.cat-ii [as per make Five Hundred Twenty

and Model approved by EIC] Seven only

Supplying and erecting Fabricating terminal box for street light pole made from 16 17.00 Each 702.00 RS: Seven Hundred 11

SWG M.S. sheet having following size complete with fixing arrangement for terminal Two only

board, with necessary hole for wire entry and exit from the box. The box shall be

provided with cover and hinges on one side and bolting at other end The box shall be

fixed by clamps fabricated from 25mm x 6mm flat.The box shall be painted with one

76 coat of red oxide and two coats of paint having following box size 330 mm x 260 mm x

140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted

with one coat of red lead paint.

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 200.00 Mtr. 58.00 RS: Fifty Eight 11

77 marked copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. only

PVC insulated round copper wire ISI mark. (streetlight)

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 16.00 Each 487.00 RS: Four Hundred 7

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size Eighty Seven only

and length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface

for terrace as per instruction of EIC or wall bracket as per instruction of EIC having

nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with

78a suitable rise as per site condition and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of yellow zinc and two coats of alluminium

paint for Single arm bracket suitable for pole or terrace as per design given by EIC. For

single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:-

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) 2.00 Each 616.00 RS: Six Hundred 1

78b (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be Sixteen only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 7.00 Each 4406.00 RS: Four Thousand 30

consumption of max. 55 Watts with single piece heavy duty & sufficient size of die Four Hundred Six only

cast aluminium housing to accommodate driver, both SPD and necessary wiring and

terminal easily inside the housing. High power LEDs wattage of 5 Watt (Driving current

of LED should be max. 80% of Rated current) shall be mounted on high quality metal

core PCB with extremely precison designed heat sink complete with IP66 protection.

LED lense are covered with thoughened glass / premium cluster Lens for better light

distribution. The fixture should be suitable for pole/bracket mounting. The fixture

should be complied with both LM79 and LM 80 certified. LED module should be tested

L70 at 50,000 hrs ( All Test Certificate must be submitted with RA bill). LED fitting

79 provided with high quality potted driver with Metal housing and protection against high

and low Voltage cut Off, Protection against 440V. Driver should have protection like

over current, over voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less

than 10% and P.F > 0.95. The Fixture should meet the technical criterias like

Operating Voltage range 180 to 270 V, total lumens of fitting not less than 7500, CCT>

4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge

immunity level at least 4 KV integral and 10 KV non integral. (Note:- The manufacturer

/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 7.00 Each 5229.00 RS: Five Thousand 36

consumption of max. 75 Watts with single piece heavy duty & sufficient size of die Two Hundred Twenty Nine

cast aluminium housing to accommodate driver, both SPD and necessary wiring and only

terminal easily inside the housing. High power LEDs wattage of 5 Watt (Driving current

of LED should be max. 80% of Rated current ) shall be mounted on high quality metal

core PCB with extremely precison designed heat sink complete with IP66 protection.

LED lense are covered with thoughened glass / premium cluster Lens for better light

distribution.The fixture should be suitable for pole/bracket mounting. The fixture should

be complied with both LM79 and LM 80 certified.LED module should be tested L70 at

50,000 hrs ( All Test Certificate must be submitted with RA bill) . LED fitting provided

80 with high quality potted driver with Metal housing and protection against high and low

Voltage cut Off, Protection against 440V. Driver should have protection like over

current, over voltage, short circuit and operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10%

and P.F > 0.95. The Fixture should meet the technical criterias like Oprating Voltage

range 180 to 270 V, total lumens of fitting not less then 11250, CCT> 4K/6K as per

site requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge immunity

level at least 4 KV integral and 10 KV non integral. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free replcement

Guarantee for complete Fixture)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total 4.00 Each 5324.00 RS: Five Thousand 21

consumption of Max.75 watts with single piece heavy duty & sufficient size of die cast Three Hundred Twenty

aluminium housing to accommodate driver, both SPD and necessary wiring and Four only

terminal easily inside the housing. High power LEDs of 5 Watt (Driving current of LED

should be max. 80% of Rated current ) shall be mounted on high quality metal core

based PCB with extremely precised designed heat sink, complete with IP66 protection.

LED lense are covered with toughened glass / premium cluster Lens for better light

distribution. The fixture should be suitable for pole/bracket mounting. The fixture

should be complied both LM79 and LM 80 certified. LED module should be tested L70

at 50,000 hrs ( All Test Certificate must be submitted with RA bill). LED fitting provided

81 with high quality potted driver with Metal housing and protection against high and low

Voltage cut Off, Protection against 440V. Driver should have protection like over

current, over voltage, short circuit and operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10%

and P.F > 0.95. The Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 11250, CCT > 4K/6K as per

site requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge immunity

level at least 4 KV integral and 10 KV non integral. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total 2.00 Each 6316.00 RS: Six Thousand 12

consumption of Max.105 watts with single piece heavy duty & sufficient size of die Three Hundred Sixteen

cast aluminium housing to accommodate driver, both SPD and necessary wiring and only

terminal easily inside the housing. High power LEDs of 5 Watt (Driving current of LED

should be max. 80% of Rated current ) shall be mounted on high quality metal core

based PCB with extremely precised designed heat sink, complete with IP66 protection.

LED lense are covered with toughened glass / premium cluster Lens for better light

distribution. The fixture should be suitable for pole/bracket mounting. The fixture

should be complied both LM79 and LM 80 certified. LED module should be tested L70

at 50,000 hrs( All Test Certificate must be submitted with RA bill). LED fitting provided

82 with high quality potted driver with Metal housing and protection against high and low

Voltage cut Off, Protection against 440V. Driver should have protection like over

current, over voltage, short circuit and operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10%

and P.F > 0.95. The Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 15750, CCT > 4K/6K as per

site requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge immunity

level at least 4 KV integral and 10 KV non integral. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and erecting FRLS XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 700.00 Mtr. 451.00 RS: Four Hundred 3 15

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps 1.00 mm thick Fifty One only

83 to be laid 90 cms underground with 1.00 mm thick G.I heavy duty grade or in existing

trench / pipe at road crossing or floor of following size of cables. for 4 core 4 Sq. mm

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium 50.00 Mtr. 642.00 RS: Six Hundred 32

conductor cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with Forty Two only

84a 1.00 m.m thick G.I. heavy guage cable clamp or in existing DWC pipe underground or

road crossing or floor. For 3 1/2 core 120Sq. mm( 70 Sq. mm 1/2 core)

For 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 50.00 Mtr. 583.00 RS: Five Hundred 29

Eighty Three only

Providing & fixing Double compressed heavy duty flange type brass cable gland with 40.00 Each 43.00 RS: Forty Three 1

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating only

tape etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet,

Providing & fixing Double compressed heavy duty flange type brass cable gland with 4.00 Each 130.00 RS: One Hundred

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating Thirty only

tape etc. For following size cables. For 3 & 1/2 core 95 Sq. mm (Sigma, MCI, Comet,

For 3 & 1/2 core 120 Sq. mm (Sigma, MCI, Comet, HMI Make Only) 4.00 Each 139.00 RS: One Hundred

Thirty Nine only

Solderless crimping type Copper lugs conforming to IS suitable for cable of following 100.00 Each 8.00 RS: Eight only

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.For 1.5/2.5 to 6 Sq.mm Cable

Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable 4.00 Each 20.00 RS: Twenty only

for cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. For

50 Sq.mm. Allumium Cable

For 70 Sq.mm. Allumium Cable 4.00 Each 25.00 RS: Twenty Five

For 95 Sq.mm. Allumium Cable 12.00 Each 40.00 RS: Forty only

For 120 Sq.mm. Allumium Cable 12.00 Each 45.00 RS: Forty Five

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 150.00 Mtr. 117.00 RS: One Hundred 17

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent Seventeen only

and ultra violet material properties with necessary connecting accessories of same

89 material at required depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to make ground as

per original. For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 6.00 Each 6000.00 RS: Six Thousand 36

mm dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earth electric only

rod must be made from Corrosion free Hot dip galvanizing pipes having following

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner

pipe for that pipe must be pressed and give rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC

90a 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for

long time Back Filling Compound weight is 25 Kg.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has

to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

Providing & Erecting Earthing Chamber and cover:- Earthing chamber should heavy 6.00 Each 1025.00 RS: One Thousand 6

duty PVC/CC/brick masonary be size of 400 mm X 400 mm X 400 mm depth and Twenty Five only

Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm

thick. Necessary test report must be submitted.

For above earthing additional charges for boring in hard rock soil/ semi hard rock soil 6.00 Each 325.00 RS: Three Hundred 1

90c (by breaker) & filling soft soil in earth pit (certificate for soil have to given by DEE / AE Twenty Five only

along with photographs)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 150.00 Mtr. 70.00 RS: Seventy 10

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - only

91a 227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required. for One wire 6.00 sq. mm

For One wire 10.00 sq. mm 150.00 Mtr. 114.00 RS: One Hundred 17

For One wire 16.00 sq. mm 150.00 Mtr. 176.00 RS: One Hundred 26

Seventy Six only

Supplying and Erecting in existing fabrication panel Approved make Four pole 1.00 Each 22813.00 RS: Twenty Two 22

moulded case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V. having Thousand Eight Hundred

normal current rating 250 A. with Variable or fixed thermal & magnetic release suitable Thirteen only

to work on A.C.supply 50 c/s. with all internal connections spreader tinned copper &

complete erected in existing 16 G.M.S. housing. housing. ICS=100% of ICU only

Supplying and Erecting in existing fabrication panel Approved make Four pole 1.00 Each 17667.00 RS: Seventeen 17

moulded case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V. having Thousand Six Hundred

normal current rating 200 A. with Variable or fixed thermal & magnetic release suitable Sixty Seven only

to work on A.C.supply 50 c/s. with all internal connections spreader tinned copper &

complete erected in existing 16 G.M.S. housing. housing. ICS=100% of ICU only

Supplying and Erecting in existing fabrication panel Approved make Four pole 2.00 Each 8774.00 RS: Eight Thousand 17

moulded case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V. having Seven Hundred Seventy

normal current rating 125 A. with Variable or fixed thermal & magnetic release suitable Four only

to work on A.C.supply 50 c/s. with all internal connections spreader tinned copper &

complete erected in existing 16 G.M.S. housing. housing. ICS=100% of ICU only

Supplying and Erecting in existing fabrication panel Approved make Four pole 16.00 Each 6723.00 RS: Six Thousand 1 07

moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415 V. having Seven Hundred Twenty

normal current rating 25 A to 100 A. with Variable or fixed thermal & magnetic release Three only

suitable to work on A.C.supply 50 c/s. with all internal connections spreader tinned

copper & complete erected in existing 16 G.M.S. housing. housing. ICS=100% of

Supplying and erecting Approved make Earth fault Relay suitable to mount with inter 4.00 Each 5105.00 RS: Five Thousand 20

connection to moulded case circuit breaker having CT ratio & MCCB rating as One Hundred Five

following along with shunt trip 220 V AC with all internal connections & complete only

erected in existing M.S.housing.63 A., CT Ratio 1/100

Approved make Earth fault Relay suitable to mount with inter connection to moulded 2.00 Each 5898.00 RS: Five Thousand 11

case circuit breaker having CT ratio & MCCB rating as following along with shunt trip Eight Hundred Ninty Eight

220V AC. with all internal connections & complete erected in existing M.S.housing. only

For 250A- 400A, CT Ration 1/400

Providing & erecting Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to 120.00 Each 122.00 RS: One Hundred 14

98 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Twenty Two only

existing box. confirming to IS 8828/1996 with ISI Mark.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C 32.00 Each 360.00 RS: Three Hundred 11

99 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing metal box Sixty only

having following capacity for 40Amp DP.

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 12.00 Each 649.00 RS: Six Hundred 7

100 10 KA Breaking capacity and confirms to IS : 8828 in existing metal box having Forty Nine only

following capacity. For 6 to 32 Amp FP.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 4.00 Each 803.00 RS: Eight Hundred 3

101 having 10KA breaking capacity & confirms to IS :8828 in existing box having following Three only

capacity for 63Amp FP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 32.00 Each 2434.00 RS: Two Thousand 77

mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single Four Hundred Thirty Four

102 phase 240 V 50Hz. having characteristic of quick action & tripping with all advance only

feature & do not incorporate any electronic component. for following Max. rating

erected as directed. For 40 Amps.DP

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet 12.00 Each 486.00 RS: Four Hundred 5

103 steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing Eighty Six only

terminals for following type of RCCB, RCCB + MCB for 4 Pole

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 3.00 Each 1263.00 RS: One Thousand 3

x 1/2 digits LED display, 0.5 class of accuracy 0 to 750 AC Volts range erected on Two Hundred Sixty Three

existing panel board with all connection, wiring etc. with manufacturers calibration only

Supplying & erecting aproved make Panel mounting type Digital Ammeter having 3.00 Each 1543.00 RS: One Thousand 4

Three Digits LED Display,0.5 class of accuracy, External CT operated Calibrated for 0 Five Hundred Forty Three

to 1000 Amps suitable to operate on 500 Volt AC erected on existing panel board with only

all connection wiring etc.with manufacturers calibration certificate.

Supplying, erecting, testing and commissioning of Ammeter / Voltmeter selector switch 6.00 Each 314.00 RS: Three Hundred 1

106 for 3 phase AC supply 500 V on existing panel board with necessary connections. Fourteen only

Supplying and erecting approved make set of indicator lamps LED lamp, lense cover, 20.00 Each 43.00 RS: Forty Three

107 bakelite holder complete erected with necessary connections. only

Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of 600.00 point 1.00 RS: One only

all types along with accessories etc. complete and handed over to dept.

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with 700.00 Each 9.00 RS: Nine only 6

accessories, G.I. down rod, frame etc. and making the site clear.

TOTAL ELECTRICAL COST(B) 36 22

TOTAL COST(A+B) 1 99 89

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.