Provision of Additional source for water supply scheme Jeshta , Manjhli and Parli in Tehsil Bhunter Distt Kullu (H.P)

Excavation in foundations, trenches etc., in earth work , lift up to 1.50 metres stacking the excavated soil not more then 3 metres clear from the edge of excavation and then returning the stacked soil in 15 cm layers, when required in to plinths , sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres in pick jumper work complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing and laying cement concrete 1:4:8 ( 1cement: 4 Sand : 8 graded stone aggregate, 40mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing form work with steel plates3.15mm thick welded with Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fairfinish I/c centring , shuttering , strutting and proping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4m and removal of the same for insitu- reinforced concrete &plain concrete work in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Flat surfaces such as soffits of suspended floors , roofs, landings & the like . Floors etc. up to 200 mm in thickness complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Foundations and plinth complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

In wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing mild steel/tor steel reinforcement including bending, binding and plaCSng in position complete up to floor two level complete in all respects with in all leads and lifts as per direction of Engineer in charge.

Providing and fixing man hole cover made with angle iron 40 x40x 3 mm thick( base frame) & 30x 30x 3 mm thick top frame covered with MS sheet 6 mm thick with locking arrangements to avoid the anti social activities ( lock with a set of 3 keys). ( Weight of man hole cover should not be less than 34 Kg) with in all leads and lifts

Providing and fixing 1.80m high barbed wire fencing with angle iron posts 2.50m high 40x40x4 2.50mC/C with 9 horizontal rows and 2 diagonal rows of barbed wire embedded om C.C.1:4:8 (1cement:4sand:8graded stone agg. 20mm nominal size) complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing and fixing steel gate around Intake and storage tank complete in all respects with in all leads and lifts as per direction of Engineer in charge.

Laying and jointing of G.I pipe for ( Scour pipe) with complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. Labour rate

32 mm dia

40 mm dia

Providing and fixing brass wheel valve of all approved make following dia including all kinds of leads and lifts complete as per specification with in all leads and lifts

32 mm dia

40mm dia.

Please Enable Macros to View BoQ information