CONSTRUCTION AND RENOVATION WORK OF MACHIA FORT (ELECTRIC WORK)

Amount

SITC of Mono solar Module 400Wp and above, Cell type: MONO PERC HALFCELL SOLAR CELLS, Positive Power Tolerance 0/+ 5W, Glass with Anti Reflective Coating Improves light transmission, 15 Year Product Warranty, 25 Year Linear Power Output Warranty, PID Free Modules with long term reliability, Salt mist, Ammonia, Blowing Sand and Hail Resistant, System voltage: 1500VDC to reduce the BOS cost, Sustain Heavy Wind & Snow loads (2400 Pa & 5400 Pa) Make Axitec, REC, Sunpower, Panasonic, LG, Luminous, Transrail

Off-Grid Solar Inverter, Bidirectional Inverter, Flexibility in Design, IGBT based rectifier, Advanced Mutiple DSP, Support multiple input, DG Support available, Monitoring features Make Enertech,Statcon, Luminous

12V,200Ah for 5 hours backup, 5 years warrenty,Easy maintenance,Higher Reliability,Excellent Charge Acceptance,Designed for Deep Cycling Capabilities & Longer Service Life,Larger Electrolyte Volume Reduces Frequency of Water Topping,Premium Range - The Ultimate Inverter Battery,Tough Condition - Tough Battery with Thicker Plates,Long Life - 1200 Cycles @ 80% DOD,More Electrolyte per Ampere Hour,Greater Protection against Leakage and Corrosion due to Heat Shield Tamper-proof lid Make Exide,Luminous

SITC of Module Solar Connector (Pair) MC4 Connector: Shell has a strong anti-aging, anti-UV capability; found in outdoor use under harsh environment Make Solaredge, Enphase, HITACHI, FRONIUS, DELTA, Luminous

SITC of 1 Core 4 Sq.mm Copper solar DC Cable TUV -TYPE 1 BLACK with conduit, lugs and other accessories Make Finolex, Polycap, Lapp, RR, KEI

SITC of Remote Monitoring System

SITC of Ac Junction Box with isolator, DC fuse, AC SPD, Digital D.C. voltmeter, ammeter, A.C. failure alarm & Ground fault relay and its annunciation, Double pole D.C. contactor of suitable capacity for annunciation, Triple pole A.C. contactor of suitable capacity for ON/OFF operation, Indicating lamps, Triple pole, A.C. circuit breaker of sufficient capacity to meet system requirements & capacity with overload and short circuit release for incoming A.C. supply to charger panel, MCB / MCCBs for A.C. supply to individual chargers, A.C. under voltage relay, MCCB and DC contactor of suitable capacity in output circuit of each charger to suit the operation requirements Make Solaredge, Enphase, HITACHI, FRONIUS, DELTA, Customised

SITC of PV Module Mounting Super structure GI / Hot dipped made up with Pillars of the structure 3" square pipe, Rafters are of 3"x1.5" rectanglen pipe, Parlen are of 1.5"x1.5" square pie and MS Base plates of size 8"x8"x8mm. Make TATA, APPOLO, SAIL, JINDAL. Note:- pipes used in the structure should be in standard single pieces with no weilding joints.

SITC of Lightning Arrestor Advanced Early Streamer Emission (ESE) Lightning Conductor

SITC of Maintenance Free Earthling System (Earthling Pit, Earthling Strip, Earthling Wire)

SITC of Walkway Systems for Cleaning and maintanance, 300mm x 30mm x 20mm x 1.5mm pre GI walkway

SITC of Bullet Camera, Video Resolution: 2MP, 1080x1920 Pixels @30 fps; Image Sensor: 1/2.8-inch CMOS; Built in Infra-Red: 30 mtr; High Dynamic Range- 120 dB WDR; Lense- 3.2 -10 mm, F1.6, FOV:89° (H) x 47° (V); Onvif Profile S,G,T Confirmant; UL Certified; OEM Certificatification required Make: Tyco, Bosch, Axis

SITC of Video Surveillance Storage Server, Mini Tower, pre-configured and pre-installed. with a capacity of connecting upto 42 concurrent recordable cameras with pre installed storage capacity of 36 TB Hot Swappable SATA 4hard drives in a fault tolerant full featured; Processor Intel i3-8100 processor Socket 1 x (Intel processor socket LGA1151) GPU version Nvidia Quadro P620 or successor 4 x Mini-DisplayPort UL Certified OEM Certificatification required Make: Tyco, Bosch, Axis

Supply, Installation, Testing & Commissioning of Camera Channel Licences professional with SMA for 2yr. OEM Certificatification required (Approved Makes: Axis, Bosch, Tyco)

SITC of 55" LED Monitor, Professional series, Resolution 3840x2160, 60Hz LFD Display, 2 x HDMI Port 1 x USB Port,RJ45, Contrast Ratio - 4000:1, Response time- 8 ms, Brightness 500 nits or higher, Power consumption:155 Watt; Built in speaker 20W ,Haze 25% & Above Viewing angle 178° x 178°,Wall mount for Display:,consumption, 24x7 application, Fix Wall mount with if required Safety & EMC Certifications- CE,FCC,UL,BIS, with required HBMI cable MAKE: Samsung, LG, Panasonic or Make approved by Client department,compitant authority or site Engineer

Supply, Installation, testing and commissioning of 20 W ,IP-65/CE compliance integrated All in One solar street light fixture having Cast aluminum body encases with integrated monocrystalline MNRE Approved solar PV panel with lithium Ferro phosphate battery (LiFePO4) with 2 Days Autonomy. BIS approved luminaire should be with secondary optic lenses for better distribution with delivered efficacy of >120 lumens per watt with minimum 50000 hrs. rated lamp life. Brand of LED's should be of Philips/ osram/nichia/cree/seoul and driver efficiency should be >85%, CRI >75, CCT 6000 to 6500K, Microcontroller based high efficiency controller cum driver designed with automatic dimming function with PIR Motion sensor. Dusk to Down operation, working temperature (-) 10C to (+) 55C with adjustable clamp suitable for pole/wall mounting complete in all respect with protection like short circuit overload reverse polarity and battery protections light coverage must be 120 degree or greater complete as required. Compact solar street LED Street light Make:- Surya, Transrail, Bajaj

Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of 5 MTR Make:- Surya, Transrail, Bajaj

Bidder Name

Amount

Vipul Enterprises(GSTN-08ACYPC1271D1ZO)

Ample Incorporation(GSTN-08AFZPC3225P1ZU)

Vipul Enterprises

Vipul Enterprises