PROVN OF CERTAIN SANCTION WORK AT (PHASE-VIII) OF VARIOUS UNITS AT TEZPUR AREA UNDER GE (S) TEZPUR

Amount

Dismantling AC Corrugated/Plain Sheets as in Roofing including Ridge, Eaves Board, Sunshades etc or Similar Pattern Roof Coverings, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, as in framed or Unframed Work, complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI 'J' type adjustable suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board of approved make) complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and as directed.

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.

M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Preparing old decorated plastered surfaces of Walls, filling cracks with water proof putty and applying two Coats of Exterior Emulsion Paint Weather Coat (any colour /tint) (as per Manufacturer’s instructions), complete all as specified and as directed. Make- Asian (apex ultima), Berger Paints-Weathercoat Lifelong7 ,Dulux Paints-Wheathershield Ultraclean

M&L for Old wall surface including properly including removal of existing paint surface and fillings the cracks with exterior wall care putty and applying one coat of weather coat water proofing paints complete all as specified and directed.

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of Primer (as per Manufacturer’s instructions), and applied over 1 mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Applying one coat of distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and as directed,

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and as directed.

Demolition Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.

M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Formwork to Soffits of suspend slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed.

M&L 50 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2 using (40 mm graded aggregate) as in hardstanding and pavings including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed.

M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc complete all as specifed and as directed.

M&L for 50 mm PCC 1:3:6 C-1 using ( 20 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base complete all as specified and directed.

M&L Removal of plant from roof / wall and treat the area with bleaching powder and making good by cement plaster(CM 1:4)/ cement concrete type B0 1:2:4 (12.5 mm graded aggregate) to match the existing surfaces complete all as directed by Engr-in - Charge.

M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B0 12.50mm grade aggregate as in plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates water troughs and the like including weathering, slightly rounded or chamfered angles and throating, or similar work complete all as specified and as directed.

M & L Forming 12 mm thick expansion joints filled with pre fromed bituminous filler and top 30 mm primed and sealed with Sand and bitumen in ratio 3:1 complete all as specifed and directed.

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed.

M & L for 50 mm PCC 1:3:6 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base complete all as specified and as directed.

M & L, 15 mm thick rendering in C.M. (1:3) on brick work, inside and outside of manholes, finished even and smooth without using extra cement complete all as specified and as directed.

Cutting into existing manhole for connection new drain making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150 mm dia complete all as specified and as directed.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in coping, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed or similar work complete all as specified and as directed..

M/L PCC 1:2:4 type B0 12.5 mm graded aggregate as in sub base,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, coping or similar work complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M & L preperation of new untreated wooden Surfaces plain or moulded, two coats of synthetic enamal paint over a coat of primer n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed.

M & L Glazed Ceramic tiles (premium) Dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick creed bed in cement mortar (1:4) complete all as specified and as directed

M & L Glazed Ceramic tiles (premium) Dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick creed bed in cement mortar (1:4) complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as spcified and directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified all as specified and directedcomplete all as specified and as directed.

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring complete all as specified and as directed.

S&F MS 200mm ordinary rod pattern spring including roller and roller plate, fixed to steel/wooden door complete all as specified and as directed.

S&F Extruded aluminium alloy handels fabricated type, anodised, 150mm long complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 250 mm long and fixed with screws complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed.

Providing and fixing aluminium glazed door/window duly powder coated in regular RAL colors as specified using high strength to weight aluminium section of grade 63400 WP confirming IS:733 and IS:1285. Complete including 31 mm thick (8mm+15mm+8mm) DGU glass (Double Glazing Unit glass) necessary hard wares such as handles, rollers, locking system etc. if any. (Black colour. The fabrication shall be done with all joints, mitred, the outer frame mullions and shutter frame jointed with heavy duty aluminium joinaries. Appropriate profiles of EPDM gaskets shall be inserted between aluminium frames/beadings and glass both inside and outside to make the glazing light complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Stainless Steel Butt Hinges, size of Hinges 100 mm (medium weight) and fixed, complete all as specified and as directed

Supply and fix of stainless steel handles fancy/ decorative type 100 mm size complete all as specified and directed.

S&F stainless steel, barrel tower bolt decorative type 150mm long complete all as specified and directed.

S&F powder coated aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc,complete all as specified and as directed.

S&F powder coated aluminium(Thickness or powder coating not less than 50 micron). window and ventilator shutters, sliding type , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified and as directed.

S&F Flush Shutters 35 mm thick, Solid Core Construction with Particle Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed.

M&L Second Class Hardwood plain fillets, sqaure, rectangular or triangular in section Clean Swan, fixed with Nails, cross sectional area exc 13.0 Sqcm but not exc 25.0 Sqcm, complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Clean swan, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm, complete all as specified and as directed.

S & F Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed

S& F 4 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares, complete all as specified and as directed.

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.

M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.

Supply & fix in repair 20 to 25 mm dia stainless steel curtain rod including two Nos of socket and end bracket complete for doors/window opening complete all as specified and as directed.

M&L 20mm thick coloured Granite tiles machine cut as in floor laid over 20mm thick in cement mortar (1:6) set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including grinding and polishing complete all as specified and as directed.

M&L 20mm thick coloured Granite tiles machine cut as in vertical surfaces such as skirting/dado laid over 15mm thick in cement mortar (1:4) set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including grinding and polishing complete all as specified and as directed.

S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down in any position complete all as specified and as directed.

S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down in any position complete all as specified and as directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20 mm dia D type complete all as specified and as directed.

S&F in repairs Soap dish Chromium plated , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 32/40 mm dia PVC waste pipe 610 mm long for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed.

S&F PVC (SWR) Gully Trap 125mm/110mm bore (dia) Outlet, Plain with Grating and Jointing to Waste Pipe with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed.

S&F CP Grating Doom type 100/75 mm dia and fixed-in-repairs, complete all as specified and as directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair chromium plated Corner glass shelf with bracket complete all as specified and directed. Model No: ACN-1173N ,Make: Jaquar or Equivalent approved by GE

S&F PVC connections with PTMT Nut collar bush and spanner, 600 mm long fixed to 15 mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed.

S& F for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking down complete all as specified and directed

S&F for laying 20mm bore steel tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed

S&F in repairs 15mm dia stop valve fancy (not less than 575 gm) type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs flush pipe of PVC 32 mm dia ,for low level flushing cistern to squatt pattern closet including all joints and making good to floor complete all as specified and directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S & F, as in repair, counter type wash basin vitreous china wash basin, white,size 545 x 545 x 180 mm, including central hole mixer taps, waste coupling & waste pipe, complete all as specified and directed. Make : Jaguar Cat No FSS-WHT-29601 or equivalent

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Bib Tap 15mm dia (bore), Cast Copper Alloy, Chromium Plated, screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and directed.

Supply and fix as in repair, overhead shower 125mm dia round shape shingle flow (ABS Body) chromium plated with gray face plate with rubit cleaning system, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches complete all as specified and directed.

Supply and fix, 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed.

Fixing only , 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed.

Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed.

Fixing, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor complete all as specified and directed.

S&F for PVC (SWR) with access door bend 110mm dia complete all as specified and directed.

S&F for PVC (SWR) with access door bend 75 mm dia complete all as specified and directed.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and directed.

M&L writing letters or figures (Block, roman, itallic or indian) n.exc. 30cm high complete all as specified and directed.

M&L writing stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

S&F 5 mm thick mirror with decorative frame of size of face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stailess steel cup washers of approved pattern complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

Taking down main switches and DBs of any type and make including wooden board / junction box complete all as specified and directed.

Material and labour for point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly and CI/pressed steel terminal box with 3.00 mm thick laminated sheet cover fixed on Wall for one light point controlled by one switch complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All as per item No. 125 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed.

All as per item No. 125 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item No. 125 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type, complete all as specified and directed.

M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal complete all as specified and directed.

S&F ceiling rose surface backelite three terminals complete all as specified and directed.

Supply and fix in repairs fan regulator electronic, step type complete all as specified and directed.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection complete all as specified and directed.

Supply and fix LED tube light fitting of 9 W with tube (2 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 9 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection complete all as specified and directed.

S & F Lamp holder insulated body PVC/polycarbonate with back plate and 7 W LED bulb suitable for batten fitting complete all as specified and directed

S&F on wall security light luminaire for 1x15 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and directed.

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as specified and directed.

Supply and fixing energy saving ceiling fan 1200 mm sweep (including all fittings and fixture), BEE 5 star rated (BLDC),without remote , minimum air delivery 210 to 230 cmm , working voltage 140 volt to 270 volt , minimum rpm 330 to 350 , ISI marked , including necessary hanging arrangement , providing three core flexible copper conductor wire of size 23/0.0076 from ceiling rose to fan complete all as specified and as directed. (Make:- Havells - Efficiencia Neo BLDC 5 Star) or equivalent make of /Polycab/Anchor/Phillips

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. Make - Legrand/ Havells/C&S or equivalent.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed

S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed

S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA, complete all as specified and directed

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed

S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified and directed.

M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including electrical plate No. 3 of SSR part - I excavation earth work complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3386256)

M/S SINGH FURNITURE MART (BID ID -3388884)

SHANKAR ENTERPRISE (BID ID -3385910)

M/s Borah Enterprise (BID ID -3392666)

Chinmay Traders (BID ID -3382416)