Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 CrAccepted-AOC | ₹3.8 Cr | L1 | Accepted-AOC Lowest One work order issued on 25.02.2021 |
| 2 | L 2₹3.9 Cr+₹11.4 L (3.01%)Rejected-Finance | ₹3.9 Cr+₹11.4 L (3.01%) | L 2 | Rejected-Finance Second Lowest unsuccessful tenderer EMD amount to be refund |
| 3 | L 3₹4.0 Cr+₹19.0 L (5.01%)Rejected-Finance 53 MIDDLE STREET ARUMALAI TIRUKOILUR VILLUPURAM DISTRICT | VILLUPURAM | TAMIL NADU | 604001 | ₹4.0 Cr+₹19.0 L (5.01%) | L 3 | Rejected-Finance Third Lowest unsuccessful tenderer EMD amount to be refund |
| 4 | L 4₹4.1 Cr+₹32.3 L (8.52%)Rejected-Finance | ₹4.1 Cr+₹32.3 L (8.52%) | L 4 | Rejected-Finance Fourth Lowest unsuccessful tenderer EMD amount to be refund |
Tender Value
Refer Docs
EMD Value
₹2.6 L
Closing Date
25 Jan 2021, 6:00 pmClosed
Superintending Engineer, South Circle TNPHC LTD
Tamil Nadu Police Housing Corporation Limited South Circle No 1 Inspector Quarters TSP VI Battalion Campus New Natham Road Madurai 625014
Construction of Working Women Hostel Building with development works at Ponmalai Zone in TIRUCHIRAPALLI City on behalf of Tamil Nadu Working Women Hostel Corporation Limited
2021_TNPHC_190978_1
SE/SC.No.28/2020-2021-1
Open Tender
Civil Works
Lump-sum
336 days
TRICHY CITY
Refer tender document
8 documents required · 8 mandatory
₹0
₹2.6 L
27 Feb 2021
13 Jan 2021
27 Jan 2021
13 Jan 2021
25 Jan 2021
13 Jan 2021
Amount
1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.3) Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.10) Earth work excavation and depositing on bank with initial lead of 10m and lift of 2.00 in Medium rock and dense medium rock not requiring blasting (b) 2 to 3 mt.
(c) 3 to 4 mt.
7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
13.1) Filling the foundation and basement with excavated earth
21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
b. T.W. below 2.00 m length.
23.3) Supplying and fixing of Magnetic door catches
25) Supplying and fixing of MS hold fasts
30) Ellispattern flooring
31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
39) Supplying and fixing of MS Grills in position
40) Painting 2 coats - New "wood work"
41) Painting 2 coats - New "iron work"
46) Supplying and fixing of 20 mm dia Alu. Hanger Rod
47) Supplying and fixing of Alu. Towel rail 75 cm long
48) Supplying and fixing of 5 pin Coat stand
49) Supplying and fixing of Chromium plated 8 gauge picture hook
50.3) Supplying and planting avenue trees
50.4) Providing Tree guard
52) Supplying laying, fixing and jointing the following dia ASTM-D schedule 40 threaded PVC pipe with necessary PVC/GI specials a. 32 mm dia
b. 25 mm dia
c. 20 mm dia
52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)
53.3) Supplying and fixing of C.I. steps (5 Kg)
Electrical arrangements 69) Supplying and fixing of 16 Amps Power plug (Modular) socket with switch
72) Supplying and fixing of concealed type Fibre box with MS Fan hook
74) Charges for fixing of "Fan"
76) Supplying and fixing of 8 SWG G.I. wire
77.3) Supplying and fixing of TV/Telephone line Socket
77.4) Supplying and fixing of concealed 20mm dia PVC pipe for TV/Telephone line
78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
86) Providing Pre-constructional Anti termite treatment
112) Supplying and fixing of Exhaust Fan 300 mm dia
Annexure 2.1.1) Supplying and filling the basement with gravel
2.1.3) Supplying and filling with Crushed stone sand
3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand
3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand
3.10.1) P.C.C. 1:3:6 for foundation with 20mm HBSJ using crushed stone sand
4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Foundation and basement (1.50m to 4.0m)
b. In Foundation and basement
4.6.1) Standardized Concrete mix M25 Grade using crushed stone sand a. In Foundation and basement
6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand
8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Ground Floor
8.6.1) Standardized Concrete mix M25 Grade using crushed stone sand a. In Ground Floor / In Stilt Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
g. In Fifth Floor
11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand 70 mm tk (B.P.) a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8 ¾ "x 4 ¼ "x 2 ") 50mm tk using crushed stone sand f. In Fifth Floor
14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 20MM thick a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40MM Thick a. In Foundation & Basement
18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c. For Square and rectangular columns and small quantities
d. For Vertical wall
21.5.3) Supplying and fixing in position of UPVC window of casement type (open)
21.5.4) Supplying and fixing in position of UPVC louvered ventilator type
22.2.2) Teak wood glazed shutter for french window with 5.5mm thick plain/colour glass a. 1.20 x 2.10 m openable
b. 1.10 x 2.10 m openable
22.9) Solid core TW flush door with Teak ply on both sides and TW lipping alround (35mm thick) Single leaf shutter Suitable for door of size a) 750 x 2100mm
22.9.2) Solid core TW flush door with Teak ply on both sides and TW lipping alround (35mm thick) Double leaves shutter Suitable for door of size a) 1350 x 2100mm
23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings
26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
28.1) Floor plastering in C.M. 1:4, 20mm thick. using crushed stone sand
29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
32.1.3) Finishing the top of terrace floor with one course of Anti reflective ceramic tiles (Cooling tiles) 305mmx305mmx7mm tk in C.M 1:3 20mm tk including Base concrete using crushed stone sand
33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand
35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand
35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand
36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
38.4.2) Supplying and applying Wall putty over the new cement plastered walls
38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works
43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M25 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand a) Providing pit
b) Augering 30cm dia
44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe
50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand
50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand
50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using 20mm HBSJ and crushed stone sand
52.4) Supplying laying fixing and jointing the following PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI specials c. 20mm dia
53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
53.5) Supplying and fixing of Porcelin Wash hand basin (white) of size 550 mm x 400 mm with all accessories
54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)
54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)
56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand
56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand
57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia
58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.
59.5.2) Supplying and fixing of Gully Trap using Kiln burnt country bricks of size 22 x 11 x 7 cm. using crushed stone sand
60.1) Supplying and fixing of PVC Nahani trap (4way/2way) using crushed stone sand
61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe
b) 160mm dia UPVC Non Pressure pipe
62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend
b) 160mm dia PVC Bend
62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee
b) 160mm dia PVC Equal Tee
64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 controlled by 6 Amps Modular type switch a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point controlled by 6 Amps Modular type switch
66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point controlled by 6 Amps Modular type switch
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Switch Board Itself controlled by 6 Amps Modular type switch
68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Convenient Places controlled by 6 Amps Modular type switch.
71.2) Supplying and fixing of 32 Amps triple pole main switch
71.3) Supplying and fixing of 32 Amps fuse units on suitable TW board
75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed
84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
84.5) Run of Main 4 wires of 10 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall (For AC Plug)
87.3) Supplying and fixing of 12 W surface / recess mounted down lighter (ceiling fixture)
87.4) Supplying and fixing of 2'10W battern mirror light fittings
88.1) Supplying and laying of polished Shahabad slab / stone, 20 mm thick (grey colour) of approved quality for flooring in CM 1:3 using crushed stone sand
88.2) Supplying and laying of Rajasthan Kota stone of 20mm thick for flooring using crushed stone sand
98.3) T.W.single leaf Panelled door shutter with brass screws Suitable for door of size a. 900 x 2100mm
98.3.1) T.W.single leaf Panelled door shutter with brass screws Suitable for door of size a. 1200 x 2100mm
98.3.2) T.W.single leaf Panelled door shutter with brass screws Suitable for door of size a. 750 x 2100mm
99) T.W.Double leaves Panelled door shutter with brass screws Suitable for door of size a. 1500 x 2100mm
99.4) T.W.double leaves Panelled door shutters with brass fittings Suitable for door of sizes a) 2000 x 2400 mm
101) Supplying and fixing of 25 watts LED street light
102) Supplying and fixing of 4'18 watts crystal LED tube light
103) Supplying and fixing of water tight Bulk Head fittings with guard suitable for 12 watts LED bulb
104) Supplying and fixing of 12 watts LED bulb for bulk head fittings
112.2) Supplying and fixing of 375mm dia (15" sweep) Exhaust Fan in Kitchen
112.3) Supplying and fixing of AC/DC 76mm (3") buzzer/call bell
113) Supplying and fixing of Rolling shutters (manually operated) Pull and Push type of all sizes (Upto 8m2 area)
114) Supplying and fixing of MS angle of size 50x50x5mm
115) Dismantling clearing away and carefully stacking materials useful for reuse for Brick wall in cement mortar
Borewell Arrangements 119) Supply and delivery of 5 HP open well submersible pumpset Duty - 50lpm x 100m
119.1) Supply and delivery of clear water vertical wet type 3 HP submersible pumpset Duty - 50lpm x 75m
120) Labour charges for the erection of three phase submersible pumpset in open well upto 5 HP
120.1) Labour charges for the erection of three phase vertical wet type Submersible pumpset in Bore well upto 3 HP
121.1) Supply and fixing of direct online starter confirming to IS 13947 and IEC 60947-1 three phase panel board for 5 HP
121.2) Supply and fixing of direct online starter confirming to IS 13947 and IEC 60947-1 three phase panel board for 3 HP
122) Supplying and fixing of following GI and GM Specials a) 50 mm dia GI Bend
b) 40 mm dia GI Bend
c) 40 mm dia GI Union
d) 50 mm dia GM Non-Return valve
e) 32 mm dia GM gate vale
f) 40 mm dia GI Hex Nipple
g) 25 mm dia GM Gate valve
124) Supplying and delivery of following dia GI pipes 'B' class a) 50mm dia GI pipe
124.1) Labour charges for laying of following dia GI pipes (Below Ground level) a) 50mm dia GI pipe
124.4) Supplying and delivery of following dia UPVC specials a) 40mm dia UPVC Coupling
b) 40mm dia UPVC Elbow
c) 40mm dia UPVC Tee
d) 40 x 32mm dia UPVC Reducer
125.2) Supplying and laying of 40mm dia UPVC pipe for submersible motor etc
126.1) Supplying and fixing of 150mm MS Clampset
126.2) Supplying and Delivery of 3 core of 4 Sqmm PVC insulated and sheathed flat type copper cable for submersible pumpset
127) Supplying and delivery of required dia Nylon rope for tieing the submersible motor pump
128) Supplying of 32mm dia Cast Iron Adopter
129) Supplying and fixing of 25mm dia PVC conduit pipe
132) Drilling of 150mm dia borewell in hard rock areas
132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity
133) Supplying and fixing of PVC casing pipe 200mm dia
134) Supplying and fixing of 200mm dia PVC end cap for covering the borewell casing pipe
134.1) Supplying and delivery of following dia UPVC pipes below Ground level a) 40mm dia UPVC pipe
b) 32mm dia UPVC pipe
Paver Block 140) Supplying of 3 to 10mm size HBS jelly etc.,
141) Supplying of Stone dust
142) Supplying and delivery of Rubber Moulded Hydraulic pressed Paver block 83mm thick
142.1) Delivery of 83mm thick Paver block including conveyance and labour charges for loading and unloading
143) Labour charges for spreading 3 to 10mm size HBSJ and stone dust and compaction by the earth rammer and laying Paver block including Machienry charges
344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
366.1.2) Supplying and fixing of Stainless steel Handrails for staircase (304 L Grade)
367) Providing wooden melamen polish for main door new wood work
378.2.1) Supplying and fixing of stain free Nano polish Vitrified tiles flooring 600mmx600mmx8mm using crushed stone sand
378.2.2) Supplying and fixing of Antiskid Vitrified flooring 600mmx600mmx8mm using crushed stone sand
379.7) Supplying and fixing of Granite slab of size 4' x 2' 18-20mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand b. In First Floor
383.2) Providing double nosing to the edges of granite slab of 20mm thick
383.4.1) Supplying and fixing of stainless steel sink of size 600 x 450mm x 200mm thick
383.4.2) Supplying and fixing of stainless steel wash basin (3.75mx0.60m)
384) Supplying and fixing of 10 litre capacity Handle type PVC flushing cistern (wall mounting type)
Lightning Arrestor 501) Supply and installation of Early Streamer Emission Air terminal model:L
502) Supply and installation of copper 18mm copper Rod size of 8 feet length buried in earth
503) Supply and installation of 50mm dia GI mast of 5 Mtrs length with insulators
504) Supply and installation of 70 Sqmm copper braided / solid sheathed cable
505) Supply and fixing of CP two way bib cock with health faucet
506) Supplying and fixing of CP shower Arm with over head shower rose
507) Supplying and fixing of CP Angle cock tap
508) Supplying and fixing of Brass chromium plated soap tray of size 150mmx100mm
509) Supplying and fixing of 2 x 2' Square type recessed surface mounted fitting with 36 W LED bulbs
DG set arrangements 516) Supply of 62.5 KVA Diesel Generator set
517) Erection, Testing and commissioning of 62.5 KVA Diesel generator set
518) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator
518.1) Erection, testing and Commissioning, powermains and charges for CEIG approval for 62.5 KVA Genset
Exhaust Pipe 519) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
520) Supply and installation of MS exhaust pipe of suitable thickness with 125mm dia complete wih MS wall / ceiling support etc.,
521) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool
522) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe
523) Preparation of necessary drawings for both Diesel Generator sets for approval (The building is fed by HT power supply)
524) Providing safety equipments : CO2 fire extinguisher, 1 No, 9 lit capacity fire buckets - 3 Nos. and rubber mat - 1 No.
Cabling and End Termination 525) Supply and laying of XLPE, aluminium conductor 1.1 KV grade armoured, MV cable of the following size in the existing cable trays / trenches as required generally confirming to IS 1554/Part-I/1970 a) 3.5 core x 185 Sqmm Aluminium cable
526) Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following size with earth connection a) 3.5 core x 185 Sqmm Aluminium cable
527) Supply and providing cable end termination of following size of XLPE armoured LTUG Aluminium cable with necessary Aluminium cable sockets by crimping etc., a) 3.5 core x 185 Sqmm Aluminium cable
Earthing and Earth connections 528) Earthing as per the ISI speciication with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm with copper plate of size 125mmx50mmx6mm
529) Plate earthing as per the ISI specification with an earth electrode of 2.10m class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 600x600x3mm
530) Supply and run of 2 of No. 8 tin coated copper for earth connections
531) Providing and fixing 25mmx3mm copper strip on surface or in recess for connections as required
532) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral
Provision for Lift arrangements 542) Provision for Lift 13 Persons (with machine room)
543) Erection, testing and commissioning, power mains and charges for CEIG approval
544) Supplying and fixing of Electrically operated sanitary Napkin Incinerator destroyer
545) Supplying and fixing of wall cladding using Granite tiles 2'x1', 10mm tk (Synthetic Grey)
546) Supplying and fixing of Granite tiles Ruby Red 2'x1', 10mm thick
547) Supplying and fixing of Granite tile wall cladding 2'x1' 10mm thick Jet black
548) Providing MDF single leaf shutter with T.W. alround frame for ward robe / cupboard
549) Providing MDF Double leaf shutter with T.W. alround frame for ward robe / cupboard
550) Supplying, fabricating and placing in position of Barbed wire fencing 10 Gauge 2 ply and four pronged including cost of binding wire
External Electrical Arrangements 561) Supplying of following sizes of PVC Armoured Aluminium LTUG cable a) 3.5 core 25 Sqmm aluminium LTUG cable
b) 3.5 core 70 Sqmm aluminium LTUG cable
c) 3.5 core 120 Sqmm aluminium LTUG cable
d) 4 core 16 Sqmm aluminium LTUG cable
e) 4 core 10 Sqmm aluminium LTUG cable
562) Supplying and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection a) 3.5 core 120 Sqmm brass cable gland
b) 3.5 core 70 Sqmm brass cable gland
c) 3.5 core 25 Sqmm brass cable gland
d) 4 core 16 Sqmm brass cable gland
e) 4 core 10 Sqmm brass cable gland
563) Supplying and providing cable end termination of following sizes of XLPE Armoured LTUG Aluminium cable a) 3.5 core 120 Sqmm cable end termination
b) 3.5 core 70 Sqmm cable end termination
c) 3.5 core 25 Sqmm cable end termination
d) 4 core 16 Sqmm cable end termination
e) 4 core 10 Sqmm cable end termination
563.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB Distribution board
563.2) Supply and fixing of 25mm x 3mm x 300mm copper flat on wall in the lift machine room
563.3) Labour charges for laying of PVC Armoured LTUG cable excluding civil works Below Ground level
563.4) Labour charges for laying of PVC Armoured LTUG cable in vertical wall (or) EB pole Above Ground level
563.5) Supplying and fixing of mild steel angles for truss and labour for fixing in position etc.,
563.6) Supplying and delivery of electric 400mm wall Fan
564) Supply and erection of 100 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar
565) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar
566) Supply and fixing of MS box of suitable size for the termination of cable
566.1) Supply and fixing of Manhole cover SFRC for the size of 750mm x 750mm
566.2) Supply and fixing of 40 Amps Rotary switch with 3 Nos. indicator lamps
566.3) Supply, Installation, Testing and Commissioning of 2 KVA sinewave single phase inverter with Tubular battery
567) Supplying, fixing and testing and commissioning of MCCB/MCB/Isolator in a sheet steel enclosure on surface/recess including inter connection, Painting etc., a) 40 A TPN 10 KA MCB
b) 10/20/32A DP 10KA MCB
c) 63A TPN 10 KA MCB
Fire Fighting arrangements A) FOR TERRACE BOOSTER PUMP 568) Supply and installation, testing and Commissioning of electronic driven Terrace / Mono block Booster pump suitable for automatic operation
569) Supply and installation, testing and Commissioning of Star Delta starter
570) Supplying of 1100 V Grade power / Control cables a) 4 core x 16 Sqmm. Aluminium cable for Booster pumps
b) 2 core x 2.5 Sqmm. Copper armoured for Instrumentation
c) 3 core x 2.5 Sqmm. Copper armoured cables for start / stop push buttons
571) Supplying, installing, testing and commissioning of C.I. Non-return valves a) 100 mm Nominal dia
572) Supplying, installing, testing and commissioning of C.I. butterfly valves a) 100 mm Nominal dia
573) Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves a) 15mm dia
b) 25mm dia
574) Supplying, installing, testing and commissioning of pressure switches
575) Supplying, installing, testing and commissioning of pressure gauges of 0-20 Kg/cm2 range and pipe lines
B) Supply, Installation of internal Hydrant system 576) Supplying, installing, testing and commissioning of M.S.black pipes of class 'B' a) 100mm Nominal dia
b) 80mm Nominal dia
577) Single headed hydrant valve as per IS 5290, made of Gun metal with 63mm dia instantaneous out and 80mm dia fanged inlet, Blank cap, chain and hand wheel etc.,
578) Supply and fixing of MS hose box with double glass doors wall mounting type
579) Supply of 2 lengths of 15 M long, 63mm dia RRL hose couplings made of GM with instantaneous couplings and hoses
580) Supply of 63mm dia GM short branch pipe with nozzle 20mm dia
581) Supply, installation, testing and commissioning of swinging type wall mounted hose reel drum
582) Supply, installation, testing and commissioning of approved make 25mm dia automatic air release valve with suitable size of ball valves and unions
583) Supplying and fixing of M.S.Channel 100/100 for structural support
C) Supply, Istallation, Hand held & Automatic Extinguisher 584) Supply and installation of CO2 type fire Extinguishers, wall mounting / floor stand type cylindrical in shape with discharge horn capacity 4.5 Kgs
585) Supply of hand held fire extinguisher - ABC - powder - 4 KG with suitable metal floor stand
D) Fire Alarm system 586) Supply and installation of 12 zone conventional type fire Alarm panel with fire and fault indications, alarm cancel system reset and lamp test buttons
587) Supply and installation of heat detector to operate on 24 V DC supply make system sensor WL secutron
588) Supply and installation of Electronic hooter 5 watts capacity wall mounting type
589) Supply and installation of manual call point with hammer and chain
590) Supply and installation of 2 corex1.5 Sqmm copper cable hum in suitable PVC conduit pipe
E) Public Adress system 591) Supply and installation of Pre-Amplifier 250 watts
592) Supply and installation of 6 watts wall mount speaker
593) Supply and laying of 2 core x1.5 Sqmm Loud speaker cable with PVC pipe
594) Supply and installation of Goose neck, Microphone
F) SIGNAGES 596) Supply and fixing of self adhesive foam board for indicating Fire exit in suitable places
CCTV Arrangements 597) Supplying and fixing of IP camera with 4 megafixel
598) Supplying and installation of Network video recorder (NVR) supporting upto 8 megafixel resolution recording
599) Supply of CAT 6 UTP cable confirming to EIA/TIA 568-C2 and IEC/ISO 11801
600) Labour charges for laying of CAT 6 UTP armoured cable confirming to EIA/TIA 568 - C2 and IEC/ISO 11801
601) Supplying and installation of POE (Power over Ethernet) unit with uplink option and 8 channel operating options
602) Supplying and installation of 8 Port POE (Power over Ethernet) Box provision
603) Supplying and installation of POE (Power over Ethernet) unit with uplink option and 4 channel operating options
604) Supplying and installation of 4 port POE (Power over Ethernet) Box provision
605) Supplying and installation of 4 TB internal AV - Hard disc
606) Supplying and installation of 2 KV UPS - 12V-2000 VA with digital display
607) Labour charges towards installation of all CCTV accessories cameras
608) Labour charges towards installation of all NVR and all accessories
609) Supplying and installation of 32" LED TV
610) Supply and fixing of perforated cable trays made out of 14 SWG CRCA sheet steel of following sizes a) 150 x 50mm
611) Supplying and fixing of 6 Amps to 32 Amps Double pole MCB
612) Supplying and fixing of 6 Amps to 32 Amps Four pole MCB
613) Supplying and fixing of 1 No. of 300 Amps 500 volts grade porcelin fuse unit
614) Supply and fixing of stainless steel Mosquito Net
615) Supplying and fixing of Main curtain with lining cloth
Solar Arrangements 616) Supply, Erection, Commissioning and testing of Solar Power Plant
617) Supply and fixing of Solar on Grid / Grid Tie Inverter as per MNRE standards
618) Providing Roof Top Mounting Structure & Electrical Accessories mounting structure
619) Supply and commissioning of control panel with accessories
620) Supply and Erection of UG cable work LT 4 Sqmm copper, 4 core copper cable, AC DB to main distribution panel
621) Supply and installation of 1000 LPD solar water heating system
622) Supply and installation, testing and commissioning of 2 HP pressure pump to pump the cold water from the OH tank to the solar water heater
623) Piping arrangements with 32mm dia CPVC pipe of a good quality to supply the cold water from the OH tank to the solar water heaters
796) Two coat of Plastic emulsion paint including primer for wall surfaces
796.1) One coat of Plastic emulsion paint (Ceiling)
marimuthu gounder and co
ASR CONSTRUCTIONS
VIJAY RANI CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .