Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-Finance | L1 | Accepted-Finance lowest bidder | |
| 2 | L2₹13.8 L+₹1.7 L (13.7%)Accepted-Finance C O ANU REFRIGERATION WORKS GANDHI CHOWK PATHANKOT GANDHI CHOWK PATHANAKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L2 | Accepted-Finance 2nd lowest bidder |
Tender Value
₹12.6 L
EMD Value
₹25,200
Closing Date
26 Sept 2022, 2:00 pmClosed
Mukesh Gautam
AEE Electrical CSIR-IHBT
Upgradation of Gen Set Power supply- Inter connection of DG Set supply at old lab block to tissue culture lab building and Food technology Unit.
2022_CSIR_129116_1
5-280/Ws/22
Open Tender
Electrical Works
Works
120 days
CSIR-IHBT, Palampur
As per NIT
2 documents required · 2 mandatory
₹500
Director CSIR-IHBT
₹25,200
28 Sept 2022
15 Sept 2022
27 Sept 2022
15 Sept 2022
26 Sept 2022
16 Sept 2022
15 Sept 2022 - 26 Sept 2022
Amount
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as require
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. i) 150 mm Dia
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i) 120 mm dia (OD-120 mm & ID-103 mm nominal)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required i) Above 185 sq. mm and upto 400 sq. mm
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI ) i) 3.5 core 240 sqmm
Supply, fabricating, installing, testing, commissioning & electricaly connected factory(CPRI approved) made, LT panel board of approved size as recommended by IS & CPRI Norms (1.8x1.7x0.45--- LXHXD Mtr Approx) outdoor type, Floor Mounted made out of 3.0 mm thick CRCA Sheet for load bearing and 2.0 mm thick for non load beraing, Powder coated with pure polyester grade powder. Panel should be fully compartmentalised floor mounted with frame & legs of 5 mm MS 600 mm long 1100 volts, with IP 65 protection for 415 volts, 3 phase, 4 wire AC Supply, completer all as specified including provision of following accessories/ components housed in it : i) 500 Amp rated Al. bus bar with colour code TPN mounted on epoxy insulators : 01 set ( set of 04 bus bars) (1 sqmm = 1 amp) ii) Digital Multifunction metre 0-500 Amps with suitable CT= 01 SET III) LED INDICATING LAMP (SET OF THREE) = 01 SET iv) Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size with colour coding for all connection with suitable lugs as required. v) Earthing terminal, cable gland, Danger notice plate for LT with conventional skull & bone DULY RIVETED/ PASTED TO THE PANEL BOARD DOOR. INCOMING : I) MCCB 400 Amps, 4 pol;e, Microprocessor based, rupture capacity 35 KA (Spreader Links inc) = 01 no ii)400 Amp Changeover Switch = 01 NO Outgoing : i) MCCB 320 Amps, TP+N.L. 36 KA Adj - Thermal Setting - ( Spreader Links inc) = 01 No ii) MCCB 250 Amps, TP+N.L. 25 KA Adj - Thermal Setting - ( Spreader Links inc) = 01 No iii)MCCB 100 Amps, TP+N.L. 16 KA Adj - Thermal Setting - ( Spreader Links inc) = 04No iv) MCB 32 Amp, 4 Pole 10 KA C Curve = 02 Set V) 32 Amp, 4 Pole C curve + 30 Amp AC-1 Duty Contactor + Astro Time Switch terminated on terminal block. = 01 Set ( MCCB Make: INDO ASIAN/ HAVELLS/ L&T, Astronomical Time Switch Make: L&T/ LEGRAND/ SCHNEIDER,Changeover Switch : INDO ASIAN/ HAVELLS/ L&T).
Supply, fabricating, installing, testing, commissioning and electrically connected factory (CPRI Approved) made, LT Panel Board of approved size as recommended by IS & CPRI norms. (0.9x0.7x0.5) Mtr approx (LXHXD), Outdoor type, Floor Mounted 1100 Volts, made out of CRCA Sheet 3.0 mm thick for load bearing & 2.0 mm thick for non load bearing. Fully compartmentalised with IP 65 protection with base legs of 5.0 mm thick angle 600 mm long for 415 Volts, 3 Phase, 4 Wire AC Supply complete all as specified including provision of following accessories/ components housed in it. : I) 320 Amp, 4 Pole, 36 ka MCCB, Microprocessor Based ( Spreader Lincs incl) = 01 No. II) 800 Amp rated Al. bus bar with colour code TPN Mounted on epoxy insulators in Step formation = 01 Set ( set of 04 bus bars). iii) Earthing Terminal and cable glands. iv) Danger Notice plate for LT with conventional skull & bone duly riveted/ pasted to the PANEL BOARD door. (MCCB Make: INDO ASIAN/ HAVELLS/ L&T)
Supply, fabricating, installing, testing, commissioning and electrically connected factory (CPRI Approved) made, LT Panel Board of approved size as recommended by IS & CPRI norms. (0.9x0.7x0.5) Mtr approx (LXHXD), Outdoor type, Floor Mounted 1100 Volts, made out of CRCA Sheet 3.0 mm thick for load bearing & 2.0 mm thick for non load bearing. Fully compartmentalised with IP 65 protection with base legs of 5.0 mm thick angle 600 mm long for 415 Volts, 3 Phase, 4 Wire AC Supply complete all as specified including provision of following accessories/ components housed in it. : I) 320 Amp, 4 Pole, 36 ka MCCB, Microprocessor Based ( Spreader Lincs incl) = 01 No. II) 400 Amp rated Al. bus bar with colour code TPN Mounted on epoxy insulators in Step formation = 01 Set ( set of 04 bus bars). iii) Earthing Terminal and cable glands. iv) Danger Notice plate for LT with conventional skull & bone duly riveted/ pasted to the PANEL BOARD door. (MCCB Make: INDO ASIAN/ HAVELLS/ L&T)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)
Anu refrigeration works
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .