Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹45.6 L+₹2.8 L (6.46%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹52.6 L+₹9.7 L (22.7%)Rejected-AOC THADAYIL HOUSE KARAD P O FAROOK COLLEGE VIA MALAPPURAM 673632 | FAROOK COLLEGE | MALAPPURAM | KERALA | 673632 | L3 | Rejected-AOC L3 | |
| 4 | L4₹53.1 L+₹10.3 L (24.0%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹58.5 L
EMD Value
₹50,000
Closing Date
28 Nov 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
O/o Executive Engineer, PWD Buildings Division, Civil station, Malappuram, 676505
Science Block Truss work (Right side ) at PTM Government College Perinthalmanna
2022_PWD_530636_1
BL/DN/MPM/25/2022-23
Open Tender
Civil Works - Buildings
Item Rate
180 days
PTM Govt. Collage, Perinthalmanna
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
₹50,000
Yes
4 Jan 2023
18 Nov 2022
30 Nov 2022
18 Nov 2022
28 Nov 2022
18 Nov 2022
Amount
Appendix A- Truss Work
OD48146/2021-2022:Supplying, Drilling/Cleaning hole and injecting epoxy resin based ETA Approved HIT-RE 500 V3 chemical with the help of manual dispenser, into a hole of dia & depth (below mentioned) as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion,ICC, CSTB, COLA, BZS Shock approved, Seismic C1/C2 approved to use in cracked/un-cracked concrete, tested for service temperature of -40deg C to +70 deg C and LEED certified injection adhesive for rebar fixing in wet/dry conditions for diameter up to 40mm, also the chemical should have 100 years service life test. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consulatnt and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval.
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
50.6.1.6:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2
OD48145/2021-2022:Supplying and fixing 200mm pvc half cut section pipe for rainwater collection including all cost materials and labour charges etc compete
OD48147/2021-2022:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
5.22A.5:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Hard drawn steel wire fabric
11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.
ANISH MATHEW
Radhakrishnan M P
SANOOP
Bidder Name
ANISH MATHEW
Radhakrishnan M P
SANOOP
Sahir Sanoob T
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_767837.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .