Special repair to Bldg No N-8 (Single offrs accn) in Adm area at Yol Mil Stn

Amount

Dismantling of plain or corrugated steel sheeting of any gauge ,thickness as in roof covering complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.

Dismantling timber scantlings unframed work in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, complete all as specified and directed.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins angle for shed where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to grade Fe.410-W.Gde-E-250 quality A, steel work, complete all as specified and directed.

Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290 Gde E-165, steel work, complete all as specified and directed.

Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240s, steel work, complete all as specified and directed.

Mild Steel framed work as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete, conforming to Fe 410 Gde E-250 quality B, complete all as specified and directed.

Second class hardwood Newel posts, wrought, with square, rounded, chamfered or stop, chamfered edges, mortices for strings and handrails, sectional area exc. 100 mm x 100 mm and fixed, all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed.

Aluminium anodized snap grid frame work of size 605 mm x 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/instruction), cutting holes for electrical fittings fixed on an including aluminium tee of size 25mmx25mmx1.50mm as main runner, aluminium tee of size 25mmx25mmx1.25mm as cross runner and aluminium angle of size 25mmx25mmx1.25mm at the perimeter suspended from soffit at approx 900mm centre to centre with hangers 6mm dia galvanized (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanized iron flat 40mmx3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including necessary scaffolding, complete all as specified and directed.

4mm thick asbestos cement plain building boards (Decorative E Board) as in ceiling fixed or laid/ inserted to timber/GI / aluminium framework fixed with nails, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, complete all as specified and directed.

Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on fair faces of brick or concrete finished even and smooth without using extra cement, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on other than fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement with WPC, complete all as specified and directed. Note :- water proofing compound shall be measured and paid separately

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty preparatory to distempering complete, all as specified and directed.

Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old plastered or unplastered surfaces of wall including complete removal of existing finishes complete all as directed.

Preparation of old plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty preparatory to distempering complete, all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors/levelling course, 25mm thick, surface finished even and fair, complete all as specified and directed.

Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36 Sqm, in vertical surfaces such as skirting and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Glazed coloured tiles of size 350x250/450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.

Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor/ sunken floor spout, complete all as specified and directed.

Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, high pressure screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and directed.

Stop valve, cast copper alloy, fancy type chromium plated, with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repair complete all as specified and directed.

Soap dish, vitreous China white, approximate size 160x160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws, fixed, complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed with chromium plated brass screws, complete all as specified and directed.

Health Faucet (ABS Body) with 1 Meter Long easy flex in chrome finish tube and wall hook, fixed in repair complete all as specified and directed. Make:- Jaquar, Cera, Prayag

15mm bore, Brass, chromium plated centre hole Mixer, single liver for Wash hand basin for mixing hot or cold water, screwed for iron pipe, fixed in repair, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 110mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 75mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore jointed with solvent cement and (fitted with oval access door, complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore jointed with solvent cement and fitted with oval access door, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, complete all as specified and directed.

Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, complete all as specified and directed.

Ball brass valves 25mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.50 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.50 Sqm each and removing from site, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, fixed in repair, complete all as specified and directed.

15mm bore, Brass, chromium plated wall Mixer for mixing hot or cold water with over head shower 115mm long bend pipe on upper side connecting legs and wall flanges , screwed for iron pipe, fixed in repair, complete all as specified and directed. Make : Jaquar or equivalent

Metal finish fancy type curtain rod 25mm dia including brackets, globes, cleats, fixed to walls, fixed in repair, complete all as specified and directed.

Metal finish fancy type curtain bracket with rounded fancy type end knob with anique finish or coloured suiatble for 25mm dia single rod fixed in repair, complete all as specified and directed.

Natural colour 15 micron anodized aluminium ventilator with chowkhat and aluminium grill of approved design complete with all fixing arrangements including providing and fixing window handles, tower bolts and fixing lock including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881Kg/RM. (b) Shutter top member 47.62 x 44.45 x 1.1.14 mm weighing 0.607 Kg/RM. (c) Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. (d) Natural colour 15 micron anodised aluminium anodised frame of chowkhat of section 85x44.45x1.80mm weighing 1.302 Kg/RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (f) The size of Anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and aluminium anodised aluminium tower bolt of size 100mm (02 Nos).

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).

Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in lintels upto 1.5 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, roof benching, haunching, water troughs and the like including watering, slightly rounded or chamfered angles and throating, complete all as specified and directed. Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Plain cement concrete M-10 type C-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for internal dia of pipe 150mm, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work like side hung gate including pintel hinges conforming to Fe.290. Gde-E-165, complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

Butt hinges, (ISI marked), medium weight, cold rolled, stainless steel 75mm long, complete all as specified and directed.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed.

Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 125mm, fixed, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed.

Chromium plated brass over head shower rose, 125mm size, square shape, single flow with rubit cleaning system, fixed in repair, complete all as specified and directed. Make:- Cat Part No OHS-CHR-35495 of Jaquar or equivalent make mentioned in Appx 'C'.

Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed complete, including 32mm dia PVC long bend flush pipe 90cm long pipe and fixed, complete all as specified and directed.

Jet spray stainless steel of standard size fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Prayag

Supply and fixed in repair PVC valveless, crystal white, syphonic action type flushing cistern 10 litres capacity, superior quality, low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed.

Wash basins, Vitreous China (Flat back type) size 450mmx300mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15mm bore and fixed in repair, complete all as specified and directed.

Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed.

75mm thick Plain cement concrete M-7.5 nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in sub base flooring, finished even and smooth without using extra cement, complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

S&F HDHMR board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters (sliding or fixed), complete all as specified and directed.

Second class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 13 Sqcm & n. exc 25 Sqcm, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Sail-glazed stoneware drain pipes 150mm bore laid in trenches and jointed as specified, complete all as specified and directed.

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, in Cement concrete 1:4:8 type D-2 complete all as specified and directed.

Natural colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. (b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. (c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. (d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM. (e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-1 using 12.5mm graded stone aggregate to fix hold fasts all as directed. Note:- (i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys.

Natural colour 15 micron three track sliding anodized aluminium window chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing window handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881Kg/RM. (b) Shutter top member 47.62 x 44.45 x 1.1.14 mm weighing 0.607 Kg/RM. (c) Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. (d) Natural colour 15 micr anodised aluminium anodised frame of chowkhat of section 85x44.45x1.80mm weighing 1.302 Kg/RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (f) The size of Anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and aluminium anodised aluminium tower bolt of size 100mm (02 Nos).

Natural colour 15 micron anodized aluminium door chowkhat with two shutters (One wire mesh door and other ACP sheet with glass door of approved design) complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. (b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. (c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. (d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM. (e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-1 using 12.5mm graded stone aggregate to fix hold fasts all as directed. Note:- (i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys.

Taking down aluminium partition including door, window, glass and ACP sheet of any type and size, stacking the same at designated loacation not more than 100 mtr and refixing the same after completion of roof and tile work complete all as directed by Engr-in-Charge.

Supply, fabrication & fixing in position aluminium partition wall with top, middle and bottom frame of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, partly glazed with 5.50 mm thick tinted sheet glass with or without sash bar and partly panelled with ACP sheet of approved design both side decorative laminated including rubber bead jointing cleat for fixing in position all as directed by Engineer in charge.

Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point , fans, geysers, etc. complete including light fiitings any type, switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, tube light fitting, regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed.

Taking down submain wiring any type and any size and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc, complete all as specified as directed.

Taking down Main switch/DB of any type/size complete with all accessories, complete all as specified as directed.

Point wiring with 1.5 Sqmm copper conductor FRLS (Multi stranded) PVC insulated ISI Marked unsheathed cable in and including PVC concealed conduit, ISI marked of suitable size with all fittings/ accessories and including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FRLS as phase, neutral and earth wire connected to common earth dolly and including concealed MS pressed steel cadmium plated terminal boxes suitable for modular accessories made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. and 3mm thick laminated hylam sheet top cover (ISI marked) for one light point independent, controlled by one way switch/ push button, complete all as specified and directed. Note:-i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. (ii) Rate of cutting chases if required shall be paid and measured seperately.

All as per item No 94 above but for ceiling fan/ exhaust fan controlled by one 6A switch, one way complete all as specified as directed.

All as per item No 94 above but for 3 pin 5 amps switch socket independent board, complete all as specified as directed.

All as per item No 94 above but for 3 pin 5 amps socket outlet on the same board with other switch, complete all as specified as directed.

All as per item No 94 above but for telephone connetion controlled form one 6A switch, one way complete all as specified as directed.

All as per serial item No '94' above, but for 5 pin 15 amps socket out let on independent with 2.5 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed.

Supply and fixing modular switch piano flush type one way 6 Amps, 1 module, 230V, complete all as specified.

Supply and fixing modular switch piano flush type one way 16 Amps, 1 module, 230V, complete all as specified.

S&F Modular socket 6 Amp 2/3 Pin, two module 230 Volts all as specified and directed.

S&F Modular socket 6/16 Amp 5 Pin, two module 230 Volts all as specified and directed.

S&F in repairs/replacement of ceiling rose (65x50) mm surface bakelite ISI markedthree terminal, complete all as specified and directed.

Supply and fixing modular bell push with indicator 6 Amps, 1 module Fixed, complete all as specified.

S&F in repairs/replacement of bell ding dong 230 V, single phase, complete all as specified and directed.

S & F in replacement 25mm Rigid non-metallic PVC conduit heavy duty for telephone line exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

PVC Junction boxes (1 to 4 way) for telephone line fixed in repair, complete all as specified and directed.

Telephone socket fitted in robust designed assembly, plates smug fit on the wall with assembly plates with suitable modules, white in colour dust free glossy finish complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep, any size/make from existing position of any height by disconnecting electrical connections andremoving to store complete all as required at site and directed by Engr - in - Charge.

Supply and fixing of Exhaust fan (domestic purpose) of sweep 250mm, single phase, with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts, fixed on wall with angle iron frame of size 35 mm x 35 mm x 3 mm, complete all as specified and directed by Engr - in - Charge.

Supply and fixing in repair LED luminaire 300 mm x 300 mm, tricolor 20 watt, 6000 K, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as required at site and directed by Engr-in-Charge.

Supply and fixing in repair LED luminaire ceiling mounted square/ round warm white 15 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as required at site and directed by Engr-in-Charge.

Supply and fixing for AC Ceiling Fan, single phase, 230 volts, 1200 mm sweep including grouting the ragged bolts in wall, fixing the frame on the exhaust side and connecting up with PVC insulated three core 1.50 sqmm copper cable from ceiling rose to exhaust fan, complete all as specified and diercted.

S&F 20 watt emergency batten 4 ft, shatter resistant, cool day white, 6500k, Inverter batten for home, atleast 4 hours of battery backup with overcharging protection, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet ,10 watt, 6000 K, 220 volts, AC decorative type with extruded polycarbonate having efficiency 120 lumens /watt warm white with driver holder including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C series, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

MCB SP 63 Amp, 240 Volts, 10 KA, C series, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.

M&L for providing the MCB DB of sheet metal enclosure triple pole and neutral 4 way with 200 Amps rated bus bar 415 volt and grouted in wall with PCC (1:2:4) type B-1 using 20mm graded stone aggregrate, complete all as specified and directed.

MCB TPN 80 to 100 Amp, 415 Volts, 10 KA B series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs no direct wire shall be connected to MCBs.

Supply and fixing LED building security light fitting 45 watt complete with Pressure die cast aluminum housing enclosed with Heat resistant glass cover in frame complete with IP 65 protection and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable including mounting on pole, with GI bracket not less than 1.5m long of 32mm dia pipe, complete all as specified and directed. (Make : Bajaj/Wipro/Philips.

Supply and installing of the electric water storage heater of ABS body type of 50 litre capacity with rated power 2 KW, BEE 5 star rated, vertical type, thermally insulated Mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm dia bore GI hexagonal adopters/Nuts on both side of inlet (cold water supply) and outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation, complete all as specified and as directed by Engr-In-Charge.

M & L for submain wiring in and including PVC conduit 1.8 mm thick, 20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm (FRLS) and one run of PVC insulated, unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring to be carried out on completion of work. (b) Proper colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green) (c) Two runs of single core cable with one run of earth cable and suitable size of conduit shall be measured as one RM. (d) Cutting chases for sub main wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item.

Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm x 4 core cross sectional area, complete all as specified and directed by the Engr-in-Charge.

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out, complete all as specified and directed by the Engr-in-Charge.

Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by the Engr-in-Charge.

Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed by the Engr-in-Charge.

Sand cushioning to under ground cables, 8cm thick layer before laying and testing the cable and 15cm thick after laying and testing of the cable in trenches complete all as specified in Clause 19.75 of MES SSR 2009 Part-I, complete all as specified and directed by Engr-in-Charge.

Supply and Laying Un-reinforced precast concrete cable cover class LV Type 1, flat size 250mm x 150 mm x 40 mm thick, complete all as specified and directed by the Engr-in-Charge.

M & L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts and washers of GI up to test point, GI tubing 40mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth Strip & protection pipes length upto & including 7.50 metre is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.

KISHAN CONTRACTOR (BID ID -3346562)

ABHAY ELECTRICAL (BID ID -3347739)

lashkar singh (BID ID -3348495)

M/S RANA BUILDERS (BID ID -3346576)

Sushil Chauhan (BID ID -3347812)

M/S JUGAL KISHORE AND COMPANY (BID ID -3348563)

Krithvik Electricals (BID ID -3347771)