Tender for Supply of material, Erection, Testing and Commissioning for Deposit Estimate for providing SOP to IPH by prov. 11 KV HT Line, 11/0.4 KV, 25 KVA S/stn. Bhattpura a/w 3 phase LT Line in Electrical Section Maniara UESD Bhawarna.

Amount

Prov. Steel Tubular Pole 9 mtr. Long w/l 200 kg.

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any.

Prov A.I.Knee Bracing set 2x(750x50x50)mm for single pole

Prov. C.I.X-arm 2800 x 100x50 mm for Double Pole

Prov. C.I.X-arm 2400 x 100x50 mm for Double pole

Prov. C.I.X-arm 2800 x 75x40 mm for D.O. Fuse & GO Switch

Prov. A.I.X-arm 2800 x 50x50 mm for Guarding of Double Pole

Prov A.I.Knee bracing set for double pole (1500x50x50) (2700x50x50) 2 nos. for each set

Prov. H.T.Stay set Complete

Prov. Pin Insulator with pin hellically formed fitting (set of 3 No.)

Disc Insulator set cleaves and tongue helically formed fitting

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Prov. Stay wire 7/3.15 mm ( @ 8.0 kg Per Stay set )

Providing Earth Hook HT 8" Long

Providing Danger Plate

Prov. G I Wire 8 SWG

Providing Alluminium paint of superior quality

Prov. GO Switch 400Amp

Prov. AAAC 7/3.15 mm (50 mm2)

Prov. Coil earthing for steel pole

Prov. Pole Top Clamp (MS Flate 50x6) mm

Providing 11/0.4 KV ,25 KVA Transformer

Providing ST Pole 9 mtr. Long

Providing H.T. Stay set made of M.S.round 1800 mm in length and 18 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 450 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Prov.earth electrod i.e. GI pipe 38 mm dia 3 mtr long and prov. and placing in position into excavated earth pit, filling of kalmi sora 1.5 kg , charcol 60 kg and salt 60 kg in each pit along with GI Wire as required and then filling of pit with soil thereof. Complete in all respect.

Prividing M.S Channel 100x50x6 mm Cross arm 2800 mm long suitable for fixing on both Steel & PCC Poles whatever is required Single & Double Pole Str 11 KV Lines with holes at suitable places whereever is required to adjust 5/8" dia nuts & bolts,Pin Insulators,Ball Cleaves eye shoucket & washers the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality( Tfr.Base Main Channel)

Prividing M.S Channel 100x50x6 mm Cross arm 460 mm long suitable for supporting Main Channel of Transformer the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For supporting main Channel of Tfr)

Prividing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Transformer belting the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting)

Prividing Angle Iron 35x35x6 mm Cross arm 460 mm long suitable for Transformer belting the Weight of A.I.Should strictly 3.00 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting )

Prividing M.S Channel 75x40x6 mm Cross arm 2800 mm long suitable for Fuse Unit/AB Switch the Weight of M.S Channel should strictly 7.14 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( Fuse Unit/ AB switch )

Providing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Lightening Arrestors the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Lightining Arrestor )

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Providing Half clamp MS Flat 50x6 mm as per specification and satisfacation of Engineer - in - charges

Providing of L.T.Distribution Pannel box suitable for 25 KVA DTR with MCCB 63 Amps

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Provding Lightning Arrestor as per REC specification 10/176 and ISI no 3070/1974 and as per satisfication of Engineer - in - Charge

Providing Disc insulator with fitting

Providing Stay wire 7/3.15 mm @ 8 kg. per Stay Set

Providing alluminium paint of superior quality

Prov. G.O Switch for S/Stn.

Prov. A.Thimble

Prov. D.O Fuse unit

Prov.Danger Plate

Prov. Energy meter 3-P, 4 wire 200/5 amp.

Prov. LT cable 3.5 core 70 mm

Civil work i.e Transformer plinth etc.

Prov. ST Pole 8 mtr. Long

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 1800mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any.

Providing L.T. Stay set made of M.S.round 1600 mm in length and 16 mm dia having threads up to 300 mm on one end with one nut and one check nut to aviod slippage and and eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 300 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron. One anchor of Angle Iron 50 x 50 x6 mm,75 mm in length with one hole of 20 mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Providing aluminium paint of superior quality

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Providing Shackle Insulator with D-Iron complete in all respect.

Providing G.I Wire 8 SWG

Prov AAAC 7/3.15 mm (50 mm2 )

Prov. Egg Insulator

Providing Stay Wire 7/3.15 mm

Providing Eye Hook

Providing A.I.X-Arm 65x65x6 mm for gaurding Arm

Providing LT AB Cable 3.5 Core 70 mm 2

Novelty Enterprises

M/S DEVARYA ENGINEERING