NIT NO. 06 ITEM NO. 01

Supply of 11kV, 800Amps, 25KA for 1 Sec metal clad Indoor VCB 5 Panel Board (2I/C+1B/C+2O/G) as per below Bill of Material. a) 230V AC Motorized Mechanism b) Bus bars with PVC Sleeve 800 Amp c) Color coded Wiring d) Degree of Protection - IP4X e) Paint Shade - RAL7032 as per IS (Inside, Outside) f) Shunt Trip/Close coils - 24 VDC g) Warning plates h) Aux. Contactor - 4 NO + 4 NC i) Earthing – Copper j) CT/PT Wiring - 2.5 Sq. mm , All Other wiring - 2.5 Sq. mm k) POXY RESIN CAST P.T. l) 3Ph , D/O TYPE, 11KV/Sqrt.3/ 110V/Sqrt.3 , Class-1 , Burden - 100VA m) EPOXY RESIN CAST , 1-Ph CT n) 100-50/5-5A , Cl-1/5P10,Burden-_15VA o) 200-100/5-5A, Cl -1/5P10, Burden - _ 15VA p) Digital Volt meter with VSS q) Digital Amp meter with VSS r) INDICATING LAMPS LED TYPE, BREAKER ON – Red, BREAKER OFF – GREEN, AUTO TRIP INDICATION – Amber, TRIP CIRCUIT Healthy – CLEAR, SPRING Charged – Blue, RYB Indication. s) ACCESSORIES Push Button for trip circuit healthy check, Emergency Trip Button, Local Remote Switch, Trip Neutral Close Switch, Panel Space Heater with Thermostat & switch, Panel Illumination Lamp with Switch, Door Operated Switch, Timer, 8 window Annunciation with hooter. t) RELAYS Numerical Non Communicable Non draw out type with 50/50N/51/51N Protection Model- CGI14N of CGL Make, Master Trip Relay, Auxiliary Relay for Transformer Fault Make :- ABB /Crompton/Schneider/Jyoti/Kirloskar

Providing and Fixing of Chemical Earthing

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR (E&M) 2018 5.18

Dismantling of Old HTpanels from the site with the help of gas cutter And allied work & shifting the same in store

Installation by making necessary arrangements Base frame/foundation For fixing of panel and making end termination of the cable including replacing End Jointing Kits of the suitable size

Packing /forwarding & cartage up to site including loading & unloading

Testing & commissioning of installed equipment’s, ,as per required parameters with relevant IS .testing of the panel prior to switching on as follow i)Continuity and earth testing ii) Meggering of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. iii)checking for all tightness of nut and bolts iv) On load testing with engineer in charge