NIT No 52/EEE/KBZ/MCD/2023-24 Item No 01

Amount

Provision of Software System - Web Application Admin Panel for remote access & real time data viewing along with MIS reports,Kiosk App for Ticket printing at Counter (Android),QR Scanner app for Entry Gate (Android),QR Scanner app for Exit gate (Android),Backend Software For online mode and online access,Backend Software for Offline mode and offline access. Training of software to MCD employees and continued service support including upgradation alongwith 5 years service support of software with no extra payment.

Providing and fixing of Hardware System -(General) - Smart network Router (Minimum AC1750.802.1 ac/up to 300+1450Mbps/gigabit)-1 No

Providing and fixing of Hardware System -At least 10-inch android tablet (6000mAH battery,2GB RAM,32GB ROM,charger) With screen Protector - 1 Nos.,Thermal Printer (ethernet/LAN/auto cutter/150mm/sec) - 1 Nos., Black Metal lockable Cash Drawer/register/locker with key and lock and 5 compartments for paper currency with stainless steel clips and compartments for coins [Size - 16.53 inch (height)]- connnecte with thermal printer/ tablet for added security and easier cash management - 1 Nos - MultiPlug/Extension Code - 1 Nos.

Providing and fixing of Hardware system (Entry and Exit Gate) - At least 6 inch Androud Phone (5000mAH battery, 2 GB RAM, 32 GB ROM, 13 MP/5MP, charger) with screen Protector and Cover- 1 Nos. Mannual/ Wireless Barcode/ QR Code Reader (Bluetooth 1D/2D scanning, Shock Proof, Charger) - 1 Nos Power Banks for Battery Backup for Android Phones-1 Nos

On Premise Physical Server with a minimum configuration of (Processor - [1*10C/20T 9.6GT/s, 13.75M Cache Processor (Expandable upto 2 processors)], RAM - [1*16GB RDIMM, 3200 MT/s dual rank (total 16 ram slots)], server management tool, Hard Disk - [2.4TB ,HDD 10K RPM ,Hot Plug 2*1.2TB for data failover (expandable upto 8 drives) RAID 1 + Controller +2GBNV Cache,DVDRW+Dual Power Supply (2*495W,instant failover capability),LAN (2*1Gbe LOM) ,UEFI/GPT),5 year onsite warranty

Part B -CCTV S/I/T/C of 2MP varifocal lens Bullet IP Camera with following specifications:- Image Sensor: 1/2.8 2MP CMOS or better** Minimum Illumination: 0.1 lux color, 0 lux with IR or better ** Shutter Speed:1/3 – 1/100,000 s Frame Rate:25 fps or better ** Lens: 2.8 to 12mm Varifocal lens Video Compression: H.265 or better ** S/N Ratio: >45dB Resolution: (1920x1080) or better ** Protocol: should comply to IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1X IR Range: Minimum 20m Operating Temperature: -20 to 55 deg Cent Weatherproof Standard:IP66 or better ** Safety standard: UL

S/I/T/C of 2MP PTZ Camera with following specifications:- Image Sensor: 1/2.8 2MP CMOS or better** Minimum Illumination: 0.1 lux color, 0 lux with IR or better ** Shutter Speed:1/3 – 1/50,000 s Frame Rate:25 fps or better ** Lens: 30 X ZOOM Video Compression: H.265 or better ** S/N Ratio: >45dB Resolution: (1920x1080) or better ** Protocol: should comply to IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1X IR Range: Minimum 20m Operating Temperature: -20 to 55 deg Cent Weatherproof Standard:IP66 or better ** Safety standard: UL

S/I/T/C of 16 channel NVR with the following specifications: Camera resolution:upto8MP Interface: 1 HDMI, 1VGA minimum Compression :H.265or better** Network Throughput :160Mbps or better** USB Port: 2 USB port (USB2.0)minimum Hard disk interface: 1 SATA port suitable for 6TB each Protocol: IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS Operating temp: -10 to 55 deg Cent Safety standard: UL

SITC of 6 TB surveillance HDD

SITC of 8 port Giga PoE switch, 8(PoE 10/100) + 2(10/100) port long distance switch

Supply Installation testing Commissioning of following rack capacity with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and complete with accessories as reqd.17 U

S/I/T/C of LED Monitor full HD complying with the following specifications: Resolution : Full HD : 1920 x 1080 or better Backlight : LED Brightness : 400 NITS min. Video I/P port a) Min. 02 Nos HDMI 1920x1080. b) Min 01 No VGA Contrast : 1200 : 1 or better Power supply : 230v + / - 10%, 50 Hz Installation at site with connections and along with all accessories of 42 INCHES etc. complete as required with min. 3 year onsite warranty.

SITC of IP 65 box (without PoE Switches) of dimention 310 mm X 160 mmX 140 mm on pole or wall with suitable arrangement for support/ installation of 8 port Giga PoE switch and 1 nos 15/16 amp modular switch socket set.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supply Installation testing and Commissioning of Pigtails 1 meter with Splicing and testing.

Supply Installation testing and Commissioning of optical media converter gigabit SC to SC type up to 10 km.

Supply Installation testing and Commissioning of LIU boxes complete with all accessories etc. as required of 12 ports

Supplying and laying of Optical Fiber Single Mode Cable (6-Fiber) on surface or in existing conduit etc complete i/c connections etc complete as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Part C -LED Lights for Monuments and UPS with Batteries Supply, Installation, Testing and Commissioning of ROUND LED 2700K/3000K Architectural floodlighting luminaire for facade lighting with system Lumens of 100LPW, Die‐cast aluminium housing, powder‐coated finish, of following wattage. Luminaire shall be shall be fitted with suitable LEDs. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from a) Total system wattage =45 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c)100‐270 V AC, 50 Hz with d)power factor > 0.9 . e)Fixture shall be suitable to operate at an ambient temperature range of ‐ 10°C to +50°C and shall be IP 66 and IK 07 rated. f) Lifetime shall be at least L70:50000 burning hours at 50°C. g) Luminaire shall be conforming to BIS (IS 10322) etc. as required. 45 Watt

Supply, Installation, Testing and Commissioning of ROUND LED 2700K/3000K Architectural floodlighting luminaire for facade lighting with system Lumens of 100LPW, Die‐cast aluminium housing, powder‐coated finish, of following wattage. Luminaire shall be shall be fitted with suitable LEDs. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete as per requirement with the following minimum specifications a) Total system wattage =30 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c)100‐270 V AC, 50 Hz with d)power factor > 0.9 . e)Fixture shall be suitable to operate at an ambient temperature range of ‐ 10°C to +50°C and shall be IP 66 and IK 07 rated. f)Lifetime shall be at least L70:50000 burning hours at 50°C. g) Luminaire shall be conforming to BIS (IS 10322) etc. as required. 30 Watt

Supply, Installation, Testing and Commissioning of ROUND LED 2700K/3000K Architectural floodlighting luminaire for facade lighting with system Lumens of 100LPW, Die‐cast aluminium housing, powder‐coated finish, of following wattage. Luminaire shall be shall be fitted with suitable LEDs. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from a) Total system wattage =90 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c)100‐270 V AC, 50 Hz with d)power factor > 0.9. e)Fixture shall be suitable to operate at an ambient temperature range of ‐ 10°C to +50°C and shall be IP 66 and IK 07 rated. f) Lifetime shall be at least L70:50000 burning hours at 50°C. g) Luminaire shall be conforming to BIS (IS 10322). etc. as required. 90 Watt

SITC of Round LED Architectural Projector Light having color temperature of 2700K/3000K surface mounted Narrow/Medium beam, suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with suitable LEDs. should consists of highly efficient, UV and temperature‐ resistant optics with symmetric distribution. With glass cover, clear/powder coated. a) Total system wattage =15 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c) Luminaire luminous flux 1500 Lm (min), d) The luminaire should have options for various beam angles: 15⁰/25⁰. Power consumption should be 15W (max) at steady state full intensity. e) Power factor of the luminaire shall be more than 0.9. f) Luminaire should be provided with suitable integral/separate non‐integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. g) Ingress Protection should be IP 66 or higher. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. i) Operating Temperature : ‐10°C to +45°C. Luminaire Shall be BIS approved. 15 Watt

SITC of Round LED Architectural Projector Light having color temperature of 2700K/3000K surface mounted Narrow/Medium beam, suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with suitable LEDs. should consists of highly efficient, UV and temperature‐ resistant optics with symmetric distribution. With glass cover, clear/powder coated. a) Total system wattage =10 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c) Luminaire luminous flux 1500 Lm (min), d) The luminaire should have options for various beam angles: 8°/15°/20°/30°/45° . Power consumption should be 10W (max) at steady state full intensity. e) Power factor of the luminaire shall be more than 0.9. f) Luminaire should be provided with suitable integral/separate non‐integral power supply unit. The lumen maintenance L70 of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. g) Ingress Protection should be IP 66 or higher. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. i) Operating Temperature : ‐10°C to +45°C. Luminaire Shall be BIS approved. 10 Watt

Supply, Installation, Testing and Commissioning of LED 2700K/3000K Architectural Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage.The luminaire should have options for various beam angles: 8°/15°/20°/30°/45° as per the requirement. a) Total system wattage =25 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c)100‐270 V AC, 50 Hz with d) power factor > 0.9. e)Fixture shall be suitable to operate at an ambient temperature range of ‐ 10°C to +50°C and shall be IP 66 and IK 07 rated. f) Lifetime shall be at least L70:50000 burning hours at 50°C. g) Luminaire shall be conforming to BIS (IS 10322) etc. as required. 25 Watt

Supply, Installation, Testing and Commissioning of LED 2700K/3000K Architectural Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage.The luminaire should have options for various beam angles: 8°/15°/20°/30°/45° as per the requirement. a) Total system wattage =40 watt +/- 5% b) Luminaire Efficacy>=100 Lm/w c)100‐270 V AC, 50 Hz with d)power factor > 0.9. e)Fixture shall be suitable to operate at an ambient temperature range of ‐ 10°C to +50°C and shall be IP 66 and IK 07 rated. f) Lifetime shall be at least L70:50000 burning hours at 50°C. g) Luminaire shall be conforming to BIS (IS 10322) etc. as required. 40 Watt

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2Cx2.5 sq mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3C x 2.5 sq mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 4Cx2.5 sq mm

Supplying and fixing of following sizes of medium class PVC conduit 20mm along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and installation of ONLINE UPS 10 KVA /192 VDC Single Phase Input and Single Phase Output.

SITC of 40 AH 12 volt Lead Acid Battery with Rack etc as required.

FACADE LIGHTING Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required . 45 Watt/ 40 watt

Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required . 30 Watt

Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required . 90 watt

LED SMALL Projector Luminaire (12W-15W) SITC of Color Changing RGB/RGBW surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 450-650 Lm, Luminaire should be Controlled through DMX/Ethernet protocol using DMX 512 Controller, Controller can achieve 16.7M colors. The luminaire should have options for various beam angles: 15⁰/25⁰. Power consumption should be between 12W to 15W at steady state full intensity. Luminaire dimesion should be max. 80mm diameter to meet site requirements. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4 mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.Luminaire Shall be BIS approved

LED SMALL Projector Luminaire (5W-10W) SITC of Color Changing RGB/RGB W surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 280-480 Lm, Luminaire should be Controlled through DMX/Ethernet protocol using DMX 512 Controller, Controller can achieve 16.7M colors. The luminaire should have options for various beam angles: 8°/15°/20°/30°/45°. Power consumption should be between 5W to 10W at steady state full intensity. Luminaire dimesion should be max. 80mm diameter to meet site requirements. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 65 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Luminaire Shall be BIS approved.

Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, p+B14ower factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 25 W

Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, p+B14ower factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 40 W

Supply, Installation, Testing and Commissioning of DMX signal distribution device2V-24VAC power socket, suitable for signal multiplication with Signal input with XLR-3-M; Output XLR-3-F, RJ45 ..

Supply, Installation, Testing and Commissioning of DMX cable for 22AWG, 7/0.254mm annealed tinned copper conductor with PP insulation, sheilded using aluminium foil with 100% coverage, PVC insulation ..

Supply, Installation, Testing and Commissioning of IP66 & IK09 protected, halogen free and silicon free as per IEC 60754-2, polycarbonate junction box of the size W 74 x H 74 x D 47 mm complete with all mounting and electrical accessories ..

Supply, Installation, Testing and Commissioning of IP66 & IK09 protected, halogen free and silicon free as per IEC 60754-2, polycarbonate junction box of the size W 170 x H 220 x D 96mm complete with all mounting and electrical accessories ..

Part D -PA System and Cultrul Music for Monuments SITC all weather proof loudspeaker for speakers for otdoor ground , having sound LF, HF - 1" exit Max SPL not less than 128db /1m (peak), with continuous RMS power of 45 - 55 Watt RMS with programme power of 90 – 110 Watt RMS & peak power of 180 - 220 Watt RMS with minimum sentivity of 97db, Nominal Impedance : 8 ohms, nominal dispersion : 90 x 60, in birch plywood paint finish with wall mount bracket , suitable size MS frame box cover for protection etc. complete as required.

Supply installation testing & commissioning of Professional total 16 channel audio mixer with 16 mic inputs; 2 line inputs 2 stereo inputs; with inbuilt effects and equalizer, graphic EQ etc. complete as reqd.

Supply installation testing & commissioning of Dual Channel Power Class H/ D amplifier for Subwoofer & Main Speakers & outdoor speakers 2000 watt , Damping factor > 450, as required.

Fabrication, supplying, installation, testing and commissioning of Bollard Light having length 750 mm of MS Sheet i/c making designe by Laser cutting, as approved by Engineer Incharge and welding the same, with 2 nos 10 watt warm white 2 feet long LED tube light fitting and having suitable arrangement to accommodate 2 nos 10 watt warm white 2 feet long LED tube light, duly painted with one coat of primer and two coat PU paint i/c J-type foundation nut bolt but excluding foundation complet etc. as required.

P&F of following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to I.S.649/1990 etc as required (a) 3 X 2.5 sq.mm.

Supplying and laying of following size of C PVC pipe in along with all accessories like socket, bend, couplers etc. confirming to IS :4985:2000, Part II complete with fitting and cutting, jointing etc.direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 25 mm dia

Providing and fixing of flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply in White /Green/Red/Warm white color including all accessories like connectors, Endcap,Holding Cap and connector pins but excluding integrated LED adoptor etc as required.

Providing and fixing of Integrted LED Adaptor for flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply etc as required.

Part E -Pathway, Compound Lighting, Control, Sub- Control Panels, Cables and Accessories Fabrication, supplying, installation, testing and commissioning of Bollard Light having length 750 mm of MS Sheet i/c making designe by Laser cutting, as approved by Engineer Incharge and welding the same, with 2 nos 10 watt warm white 2 feet long LED tube light fitting and having suitable arrangement to accommodate 2 nos 10 watt warm white 2 feet long LED tube light, duly painted with one coat of primer and two coat PU paint i/c J-type foundation nut bolt but excluding foundation complet etc. as required.

P&F of following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to I.S.649/1990 etc as required (a) 3 X 2.5 sq.mm.

Supplying and laying of following size of C PVC pipe in along with all accessories like socket, bend, couplers etc. confirming to IS :4985:2000, Part II complete with fitting and cutting, jointing etc.direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 25 mm dia

Providing and fixing of flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply in White /Green/Red/Warm white color including all accessories like connectors, Endcap,Holding Cap and connector pins but excluding integrated LED adoptor etc as required.

Providing and fixing of Integrted LED Adaptor for flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply etc as required.

Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable 1.1 KV grade Conforming to IS 7098 of following Sizes (a) 2x6sq.mm

Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable 1.1 KV grade Conforming to IS 7098 of following Sizes (b) 2x10sq.mm

Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable 1.1 KV grade Conforming to IS 7098 of following Sizes (c) 2x16sq.mm

Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable 1.1 KV grade Conforming to IS 7098 of following Sizes (d) 4x50sq.mm

Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable 1.1 KV grade Conforming to IS 7098 of following Sizes(e) 3.5 x95 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required .. b) 125 A,36KA,FPMCCB

SITC of Pillar box Size 900 mm x 450 mm x 250 mm suitable for mounting incomer of 250 A MCCB/Main Switch Pole and energy meter 3 phase complete with eleethoypic grade aluminium of bus bar 25mm x 10 mm mounted on galvanised M.S. body power quoted pilferage proof SMC door Welded with S.S. rain com size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shade proof SMC sheet of 3 mm as required.

Supplying and fixing 40 A 4 Pole rating, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required ..

Supplying and fixing 63 A 4 Pole rating, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required ..

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required .A)Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required b)Single pole and neutral

Supplying of following size of G.I. Pipe (M- Class) i/c cutting threading on both sides etc ISI marked etc as reqd. (a) 80 mm dia

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. but without charcoal/ coke and salt as required .

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required .

P/F of Hot Press Sheet Moulded Compound (SMC) , fire retardant (Temp. resistance up to 200 deg.C),IP-55 weather proof pole box of inner dimension 200 mmx160 mmx98 mm (NS) complete with suitable arrangement for fixing of 4 Nos. of 6 to 32 amp Single pole MCB & 63 Amp. Double pole Isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with 2 Nos. of MS Clamps with SS back plate of Suitable Size with danger monogram property printed on the cover etc. as reqd .

Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full verticle window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB ‘C’ characteristics, earth stud, cable support clamp suitable for Upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the Pole. Galvanization as per relevant IS. 5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick

Fabrication supplying and fixing Class B Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 1000 mm long 32 mm dia galvanized pipe with tightening bolts complete as reqd

Fabrication supplying and fixing Class B Galvanised Double overhang arm bracket made out of 250 mm long galvanized top tube with cap & 1000 mm long 32 mm dia galvanized pipe with tightening bolts complete as reqd

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

Centering and shuttering including strulling, propping etc and removal of form for foundations footing, bases of columns, etc. for mass concrete.

Providing 15 mm thick cement plaster of mix 1:4 (1 cement:4 fine sand) at all level.

Providing and laying cement concrete in kerbs, steps and the like at or nearground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Supply and erection of 4.0mtr. height above the foundation level cast iron decorative light pole, fabricated with cast iron FG150 Grade Casting with MS Pipe inside, having seven sections of cast iron fabrication with MS pipe inside. The length and outer dia. of the different sections should be, bottom most base section should have dimension of (850 x 380 )mm, second section should be of (215 x 105)mm, third section should be of (915 x 105)mm, fourth section should be (100 x 105)mm, fifth section should be of (1638 x 105)mm, sixth section should be of (228 x 75)mm and the top most section should be of (119 x 79)mm. In which the all the portion should be made of cast iron. The 4.0mtr. pole should have full length hot dip galvanized MS Pipe complete from top to bottom inside the cast iron pole to strengthen the pole structure. Total Weight of the pole should be of 120Kg with the tolerance of +/-5%. The bottom CI portion should have round mounting base of not less than 380mm dia and thickness not less than 18mm and must be provided with service window comprising of 4way, 25Amp connector terminal and a MCB. The pole should be duly PU painted i/c accessories etc. as required.

Supply and fixing of following size double ornamental cast iron bracket with cast iron embellishments matching with the pole. The width of the bracket should be 1300mm and height of mid section of bracket should be 700mm. Bracket should be PU painted with & lacquer coating with gold/copper/silver colour with green/ black base as reqd. fixing on the existing pole for mounting LED street light fitting i/c, painting etc. as reqd.

Fabrication, supplying, installation, testing and commissioning of 12Mtr High Mast Systam with its accessories Mast shaft shall be in one section, hot dip galvanised 4mm thick (single dip) inside and outside and suitable for wind velocity as per IS 875 Part 3. There shall be only logitudinal seam weld per section and No circumferential weld. it should also include accessories for High Mast i/c head frame,2 point suspension system with steel wire rope 5mm dia (7/19 construction ) single drum wich, galvanized lantern carrige arrangment suitable for 4/6 Nos Flood Light luminaries asymmetrically and its control gear boxes and lighting finial. the Mast shall have integaral type manual tool mounted at the base compartment of its rasing and lowering operation with foundation bolts and anchor plate and control panel housing suitable RCC(1:2:4: ) shallow foundation of size 1m(L)x1m wide and 2m deep i/c excavation of earh , providing cutting, bending and placing in position reinfircement of cold twisted bar of 12mm dia-2100mm long (approx) -16 nos. and reinforcement of cold twisted bar of 8mm dia -3700mm (approx)-13nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast considering. The safe soil bearing capcity at site as 10T/sqm at 2mts. Depth with all material i/c 4 nos S.P MCB 63 Amp DP Isolator etc as required Logo/Name of manufacturer shall be embossed on the pol, Galvanization as per relevant IS.

Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos. and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with supplying and positioning of 4 nos foundation bolts size 16 mm dia, 600mm long, J type i/c 2 nos template anchor plates of size 225 mm x 225 mm x 3 mm and providing DWC HDPE pipe for cable entry & exit as required for 3 m and 5 mtr pole

Part F -Micellanious Items S/I/T/C of stand for split AC

S/I/T/C of copper pipe for split AC

S/I/T/C of Drain pipe for split AC

S/I/T/C of 3 core, 4 Sqmm Electrical wirefor Air conditioner

Supply, installation Testing and commissioning of window type air conditioner fitted with rottary compressor of 1.5 ton capacity BEE 5 star rating complete as required.

Supply, installation Testing and commissioning of 1.5 Ton, Inverter split air rotary air compressor (R-32/R 290/R410A Refrigerant) 100% copper condenser rating 2 Ton complete with outer unit as required. (5 star rated)

Supplying and fixing of full stainless steel body self-contained drinking water cooler with cooling capacity 150ltr per hr, storage capacity 150ltr and suitable for 230V supply as required.

S/I/T/C of 4 KVA Voltage Stabilizer having input voltage 150V-270V and output voltage 195-245V

Supply and fixing of UV Water Purifier with purification capacity of upto 60 ltr per hour and suitable to 230 V AC supply complete as required

S/I/T/C of 30W LED Flood Light warm white luminiare fitted with Lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following: (a) Total System Wattage 30 Watt +/- 5%. (b) Luminaire Efficieny >= 100 Lm/w (c ) Power Factor>= 0.95 (d) Protection Class- IP-66.

SITC of 60W LED Flood Light luminiare fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =60 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66

SITC of 150W LED Flood Light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =150 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66

SITC of 70/72 LED street light luminaire fitted with lens top opening driver cover made of pressure diacast aluminium housing and toughned glass cover complete with the following specifications as required with IP-66 protection a) Total system wattage =70/72 watt +-5%. (b) Luminous efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class-IP-66

Supply and fixing of 50 watt IP65 decorative single piece LED fixtures with die cast aluminium housing frosted PMMA / PC diffuser, suitable for upward mounting with power LEDs white/warm white fitted with suitable extruded aluminium heat sinks, high voltage protection and suitable constant current LED driver extra as required. Technical Particulars i) Size of fiiting- 580mm x 340mm, base section inner dia- 64mm and outer dia- 71mm ii) Total power of light fixture- 50 watt iii) Input voltage-AC 120 to 270volt 50Hz iv) Power factor > 0.95 v) Minimum lumen output of LEDs – 100 Lumen per watt vi) Luminaire protection – IP65

Supply of 12" (300mm) sweep 1400 rpm exhaust fan heavy duty complete with shutters, blades etc as reqd.

SITC of On-line UPS with inbuilt isolation transformer suitable for single phase AC input and single phase AC output, Floor mounted type, indicative power backup time of 60 mins through SMF batteries 3 KVA

Supply and fixing of signages on aluminum sheet 2.0 mm (+- 10%) fixing on wall/ceiling complete in all respect.

Providing and fixing ABC (Aluminium phosphate) power type fire extinguisher of 6kgs capacity complete in all respect with isi mark i/c fixing arrangement etc as required.

Providing and fixing 4.5 kg Co2 type fire extinguisher sqeeze grip type, trolly wheel as wll mounting type complete in all respect with isi mark i/c fixing arrangement etc as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x2.5 sq.mm+1x2.5 sq.mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4x2.5 sq.mm + 2x2.5 sq.mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x4sq.mm+1x4 sq.mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket out let

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amps switch .

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin15/16 amp socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double door

SITC of wall mounted fan 400mm sweep rated voltage 220-230 AC rated frequency 50HZ speed 1280-1350 RPM with desired color

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S.I.T.C of LED Tube type luminaire 20 Watt rating complete Extruded Aluminium batten prewired with high efficient LEDs with the following .(a) Total system wattage 20 watt +/-5% (b) Luminous efficacy>=95 Lm/w (c) Power Factor>=0.95 (d) Protection Class-IP-66

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)

Supply and fabrication of pole protection system made up of 8 SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

SITC of 5 HP 80X65 MM Monosubmersible pump set capable of delivering range of 300 to 1260 LPM at a head range of 12 to 28 mtr coupled with 3 Phase 415 v AC electric motor complete as required.

Part -G 125 KVA DG Set Supply Installation Testing and Commissioning Silent type DG sets, AMF Panel, Bus ducting/cabling from DG set to Essential Panel, Synchronizing Panel where required, DG set Enclosure room, sound insulation/Vantilation/smoke as required. Earthing of DG Set system, Control cabling, Fuel Tank/Piping, DG set Exhaust piping/Exhaust Chimney as per CPCB norms, Civil works connecting with DG set including foundation as required Capacity.

Part-H Manpower Provision for operation of Monuments RGWB LED Lights, Solar System, CCTV Surveillance System, PA System, LED Screen,Online UPS, Tickting solutions, Submersible Pump sets DG Set, Fountain and alongwith general maintenance for the same in Shift (1 Wireman in each shift) for a period of 120 Months. a) Wireman cum Operator (1 No. X 26 days X 120 = 3120 days )

Provision of operator for operation of Monuments RGWB LED Lights, Solar System, CCTV Surveillance System, PA System, LED Screen,Online UPS, Tickting solutions, Submersible Pump sets DG Set and Fountain alongwith maintenance for the same in 2 Shift (2 Beldar in each shift) for a period of 120 Months. b) Electric Beldar (1No. X 26 days X 120 = 3120 days )

Part-I Annual Maintenance comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 2nd year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 3rd year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 4th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 5th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 6th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 7th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 8th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 9th year

comprehensive maintainance of whole above system for another Nine years after completion of 1 year warranty or defect liability period. 10th year

Wextra Pvt Ltd

SACHDEVA ELECTRICALS