General Funds

Provision towards Geological Survey Charges excluding taxes

Drilling of Bore well 165 mm dia. up to 90.00 m depth by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m depth by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Supply, Delivery and Fixing of 250mm dia OD Unplasticised PVCs Pipes 6 Kg/cm2 Casing Pipe of 6 mts lengths for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Supply, Delivery and Fixing of 180mm dia OD Unplasticised PVCs Pipes 6 Kg/cm2 Casing Pipe of 6 mts lengths for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Providing of 180 mm dia PVC Casing pipe perforation charges per RM

Supply & Fixing of 180 mm dia Bore Cap with 12mm guage M.S Sheet etc. complete as directed by the Engineer in charge of the work.

Supply & Fixing of 7.5 HP, 20-24 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of Recommended brands as Category I. With Reputed Make.

Supply & Fixing of Wall Mounted Control Panel Board of Upto 7.5 HP with DOL Starter of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable Capacitor With Reputed Make.

Supply & Fixing of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete.

Supply of 3 Core 4 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990.

Supply of 16 Sq.mm WPSC (Weatherproof Single Core) ISI Alluminium Wire.

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Mechanical Means upto 3.00m Depth.

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Manual Means upto 3.00m Depth.

Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey / Natural Ivory Grey / Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 90mm 6 Kg / Sqcm - PVC pipes.

Lowering, laying, jointing and testing to hydralic test pressure including cost of water with minimum water lead of 500m for UPVC pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975 (90 mm dia pipe.)

Supply & Delivery of Bolts and Nuts With Double Washers Including Taxes and Conveyance etc., complete. (1/2" TO 1")

Supply and Delivery of CI Pipes and Fittings (SPLS) conforming to IS No 7181/1986 5531/1988, 3950/1979, and CID Joints conforming to IS No. 8794/1988 at site of work any shle in A.P including loading unloading transportaion site of work stacking at site transit lisk and package excluding taxes and duties etc. complete. All Flanged Tees 80mm Dia.

Supply and Delivery of CI Pipes and Fittings (SPLS) conforming to IS No 7181/1986 5531/1988, 3950/1979, and CID Joints conforming to IS No. 8794/1988 at site of work any shle in A.P including loading unloading transportaion site of work stacking at site transit lisk and package excluding taxes and duties etc. complete (0.60 Meter Tail Piece 80mm Dia).

Supply and Delivery of CI Pipes and Fittings (SPLS) conforming to IS No 7181/1986, 5531/1988, 3950/1979, and CID Joints conforming to IS No. 8794/1988 at site of work any shle in A.P including loading unloading transportaion site of work stacking at site transit lisk and package excluding taxes and duties etc. complete. 80mm Dia.

Supply and delivery of 80 mm dia meter "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation.

Lowering, keeping in position and fixing 80 mm dia meter of C.I Sluice Valves (with Cap / with Hand Wheel & Reflex Valves) excluding cost of Bolts, Nuts, Rubber insertion, sluice valve and tail pieces.

Installation charges of pupmpsets, including erection charges, earthing and testing etc. Complete as Directed by the Engineer in charge of work.