REPAIR MAINTENANCE OF INTERNAL WIRING, MCBs, DBs, SUB MAIN WIRING AND ELECTRICAL FITTINGS, SOLAR WATER HEATER, GEYSER, CEILING FANS, EXHAUST FANS AND ELECTRICAL FITTINGS IN MD ACCN, OTM ACCN, MD ACCN AT ZONE A AND B AND CENTRAL INSTITUTES AT PLP

Amount

Taking down old unserviceable copper/ aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC casing 'N' cappingshall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

All as per the description of serial item No 04 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

All as per the description of serial item No 04 here-in-before but one 5 pin socket outlet, 5 amps, independent complete all as specified and directed.

All as per the description of serial item No 04 here-in-before but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid conduit medium grade, ISI marked including pressed steel with existing colour terminated boxes of Modular Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and directed. Note:-(a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

All as per the description of serial item No 8 here-in-before but 5 Amp socket outlet on same board complete all as specified and directed.

All as per the description of serial item No 8 here-in-before but socket outlet 5 Amps independent board complete all as specified and directed.

All as per the description of serial item No 8 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed.

S&F switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 6 A complete all as specified and directed.

S&F socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.

S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

S&F modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and directed.

S&F modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

S&F socket, 6A-2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F modular fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.

Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:-Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved . Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved

Supply & fixing energy efficient LED light of 10/12 Watt of length - 02 Feet long having minimum 1100-1300 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:-Cat part No: -LUMILINEPLUSSBS10WLED 865SPCSS of make Havells 'or' BN 021 LED10S- 6500 PSU GR S1 of make Philips 'or' LDL-10-WW of make Crompton or its equivalent as approved

Taking down old burnt out bulk head fitting any type and Supply and Fix LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed.

S&F in replacement of existing worn out ceiling light with enviromental friendly, new generation, aesthetically designed, ultra modern, worm white , recessed mounted LED light luminaries of size 595 mm x 595 mm an independent Isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage - 36/40/42 Watt, Lumen out put- 4000-4300 Lm, THD < 10%, PF > 0.9, having short circuit and surge protection suitable for Armstrong/ Grid ceiling with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make -Havells/Crompton or its equivalent

S&F Sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F 415V 10KA 'B' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sq mm for phase and neutral and one run of 4 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed.Note : Wiring shall be done in proper colour coding.

M&L for earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified.

Charges for attending E/M petty complaint in respect repair/rectification of fault in electric fitting MCB DB's, internal wiring LT Panel and fixture and rectify the faults and replacement of unsv any type of fitting/fixture, MCB's, any type, bakalite sheet restore the electric supply and made the item functionable light point, fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type of lamp, MCB DB's and all electrical acessories and day to day /door to door maintenance, making the points/accessories serviceable in all respect with replacement of any minor parts like small length of wires (not more than 1 mtr) and other connected minor accessories. Work shall also include to check and removal of leakage in service connection / submains of houses all as specified and as directed. The scope also include cutting of existing bakelite sheet to accommodate new wiring acessories all type electric fitting/fixture. (Accessories shall be paid under respective items).

Notes : Any other replacement of major items shall be measured & paid under respective items as supply only. Fixing charge of fitting/fixture and MCB's of any type is deemed to be included in the above item.

(i) Contractor representative/engineer will report to complaint cell for morning and afternoon to collect routine/urgent nature of complaint related to internal electric supply till completion of contract. The work shall be attended by the contractor immediately. The contractor will ensure deployed of sufficient manpower with equipped all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job. The contractor will also ensure as availability of every type of requisite T&P items to his tradesman. All routine / urgent job received on job slip will be repaired and got signature of user's and will be deposited to complaint cell within 24 hrs. In case of any delay in attending the complaint more than 12 hrs after handing over of routine / urgent works, the contractor shall be liable to pay the penalty as per the item rate.(ii) Contractor shall maintain the maintenance register showing all daily complaints received and shall maintain job card for attending complaints. The signature of the user shall be obtained on the job card showing the materials used in the work after completion of the job. (iii) If the Contractor did not attend complaints, a penalty of Rs 300/- per day per complaint recovery shall be made from the work done amount. (iv) The MES Department is not responsible for the payment of staff hired by contractor for complaint rates for attending the complaints by the electrician are deem to included in the item for repair i.e. Electrician/Helper, as all the items of CA are to be supply and fixed by the contractor. ((v) All the complaint slip, register and connected document will be provided by the contractor without any extra cost. (vi) After any repair the site has to be cleaned and make the surface good.

Supply only switch piano flush button type 6 amps single pole one way. complete all as specified and directed.

Supply only socket outlet multipurpose 2/3 pin 6 amps flush button. complete all as specified and directed.

Supply only switch piano flush button type 16 amps single pole one way. complete all as specified and directed.

Supply only Switch socket combination 6/16 A 250V AC universal with box in polycarbonate. complete all as specified and directed.

Supply only socket outlet multipurpose 2 in 1, 6 and 16 Amps. complete all as specified and directed.

Supply only bell push flush type 5 amps complete all as specified and directed.

Supply only electric bell Ding-Dong AC 230 Volt SP with brass screws and cup washers. complete all as specified and directed.

Supply only modular switch piano flush button type 6 amps single pole one way. complete all as specified and directed.

Supply only modular socket outlet multipurpose 2/3 pin 6 amps flush button. complete all as specified and directed.

Supply only modular switch piano flush button type 16amps single pole one way. complete all as specified and directed.

Supply only modular socket outlet multipurpose 2 in 1, 6/16 Amps. complete all as specified and directed.

Supply only modular ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections. complete all as specified and directed.

Supply only Modular bell push flush type 6 amps complete all as specified and directed.

Supply only new generation energy saving and environmental friendly long life versatile pressure die cast alumonium IP-65 flood light luminaire with high power COB LED as light source luminaire with high power 30 watt LED Flood light. complete all as specified and directed.

Taking down of existing unserviceable bolard fitting of any type and any description, supply and fix LED bolard fitting made in die cast aluminium spigot housing with decorative clear opal diffuser and IP65 protection complete incl fixing arrangement with pipe and PCC (1:2:4) and necessary connection complete all as specified and directed. Make:- Bajaj Cat Part No BGBOL 650 9W LED or equivalent in Havells/CG as approved by GE

Taking down of existing unserviceable bolard fitting of any type and any description, supply and fix LED Post Top Lantern fitting made in die cast aluminium spigot housing with decorative clear opal diffuser and IP65 protection complete incl fixing arrangement with pipe and PCC (1:2:4) and necessary connection complete all as specified and directed. Make:- Bajaj Cat Part No BGBCT W4 650 40W LED or equivalent in Havells/CG as approved by GE

Taking down old unserviceable swing wall mounted fan any type/size, supply and fixing of swing wall fan ,ISI mark AC single phase, 240 V of size 300 mm sweep complete with connection from ceiling rose to wall mounted fan complete all as specified. Make -Bajaj/Crompton/Orient Note -Old unserviceable wall fan to be deposited in MES store yard.

Taking down old unserviceable exhaust fan (PVC body) any type/size, supply and fixing of exhaust fan ,ISI mark AC single phase 240 V of size 250 mm sweep 1400 RPM with louvers shutter and making good disturbed complete with connection from ceiling rose to exhaust fan all as specified. Make:-Bajaj/Crompton/Orient Note - Old unserviceable exhaust fan to be deposited in MES store yard.

Taking down old unserviceable ceiling fan any type/size, supply and fixing of Ceiling fan ,ISI mark AC single phase 240 V of size 1400 mm sweep 1400 RPM and making good disturbed complete with connection from ceiling rose to Ceiling fan all as specified. Make:-Bajaj/Crompton/Orient Note:- Old unserviceable ceiling fan to be deposited in MES store yard.

Taking down old unserviceable exhaust fan (PVC body) any type/size, supply and fixing of exhaust fan (PVC ),ISI mark AC single phase 240 V of size 200 mm sweep 1400 RPM with louvers shutter and making good disturbed complete with connection from ceiling rose to exhaust fan all as specified. Make -Bajaj/Crompton/Orient Note:- Old unserviceable exhaust fan to be deposited in MES store yard.

Taking down old unserviceable electric storage water heater any type/size, supply and installation of electric storage water heater (vertical type geyser minimum 5 star rating, 50 ltr capacity 240 V, ISI mark AC single phase having stainless steel inner tank incl heavy duty pin type fasteners 4" long and PVC flexible connection pipe as per site requirement incl plug in top 15 amp and making necessary inlet/outlet water connection and making good disturbed surface of walls to match with existing surface complete all as specified. Note-old unserviceable electric water heater to be deposited in MES store yard. Make -Bajaj/Recold/Havells

Taking down old unserviceable electric storage water heater any type/size, supply and installation of electric storage water heater (vertical type geyser minimum 5 star rating, 25 ltr capacity, 240 V, AC single phase having stainless steel inner tank incl heavy duty pin type fasteners 4" long and PVC flexible connection pipe as per site requirement incl plug in top 15 amp and making necessary inlet/outlet water connection and making good disturbed surface of walls to match with existing surface complete all as specified. MAKE:- Bajaj/Recold/Havells Note:-Old unserviceable electric water heater to be deposited in MES store yard.

Supply only indicator lamp for geyser of any type colour green & red complete all as specified and as directed.

Taking down ceiling fan/wall mounted fan /Air circulator fan ,any size and sweep from its position after disconnecting electrical connection and transport it to workshop for servicing,dismantling for servicing including removal of bearing,bushes, condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades, fan body r etc with soap solution after repairing re- assamble the same and transporting from workshop to any location in Palampur Mil Station and fixing to position / location as directed by Engineer-in- charge, connecting to electric system, testing etc complete all as specified and directed by Engineer-in-charge: - Note: -(i) Replacement of parts/rewinding shell be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts.(iii) Item such as bearings, bushes, capacitor, shaft etc required for replacemen shalled be measured and paid seperately as supply only.

Taking down and transporting of exhaust fan (PVC/Metal body) 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside Palampur Mil Stn to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location/other location including making good disturbed surface including testing to entire satisfaction of Engineer-in-charge. Note: -(i) Replacement of parts/rewinding shell be measured and paid separately. (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, bushes, capacitor, shaft etc required for replacemen shalled be measured and paid seperately as supply only.

Supply only fan blades (set of three) of any make / type of exhaust fan of size200/250/ 375/450mm sweep complete all as specified and directed.

Supply only dwon Rod (iron) of size 1'/2' suitable for 1200mm/1400mm ceiling fan complete all as specified and directed.

Supply only U climp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and directed.

M&L cutting and taking out old burnout winding of any sweep ceiling fan/wall mounted fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of Engineer- in- charge.

M&L cutting and taking out old burnout winding of any sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of engineer in charge.

M&L cutting and taking out old burnout winding of 600mm sweep Air circulator fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of engineer in charge.

Supply condensor 1.5 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.

Supply only condensor 2.5 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.

Supply only ball bearing suitable for ceiling fan / exhaust fan / wall mounted fan of any sweep complete all as specified and directed.

Supply only gun metal bush suitable for ceiling fan / exhaust fan / wall mounted fan of any sweep complete all as specified and directed.

Material and labour, painting with two coats of spray painting to exhaust fan/ ceiling fan/wall mounted fan, fan blades, down rod, canopy etc any type and size with Ist quality synthetic enamel paint, colour as approved by Engineer-in-charge after removing existing paint by scrubbing, dusting etc and finally writing the fan numbers etc with paint (Colour as approved by Engineer-in-charge) complete all as specified and directed.

Supply and fix in repairs steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F in replacement 3 pin plug top of capacity 6 Amp,ISI mark AC 240 Volts 50 Hz complete all as specified and directed.

S&F in replacement 3 pin plug top of capacity 16 Amp,ISI mark AC 240 Volts 50 Hz complete all as specified and directed.

S&F in replacement 1.50 Kw heating element Triangular shape ,ISI mark for electric storage type geyser including connection and testing complete all as specified and directed.

S&F in replacement 2.0 Kw heating element Triangular shape ,ISI mark for electric storage type geyser including connection and testing complete all as specified and directed.

S&F in replacement 450mm long stainless steel flexible water connection pipe ,hot and cold , ISI mark for electric storage type geyser including leakage testing complete all as specified and directed.

S&F in replacement thermostat 0 to 80 degree temp range ,9" long ,ISI Mark for electric storage type geyser including connection and testing complete all as specified and directed.

S&F in replacement siphon assembly for electric storage type geyser including connection and testing complete all as specified and directed. (As per existing holes)

S&F in replacement copper/ Stainless Steel geyser tank 25 litre capacity for electric storage type geyser including leakage testing complete all as specified and directed. Note-Old unserviceable copper tank to be deposited in MES store yard & Old unserviceable stainless steel tank has taken in Sch of credit.

S&F in replacement copper/ Stainless steel geyser tank 50 litre capacity for electric storage type geyser including leakage testing complete all as specified and directed. Note:- Old unserviceable copper tank to be deposited in MES store yard & Old unserviceable stainless steel tank has taken in Sch of credit.

Supply only glass wool for electric geyser storage type complete all as specified and directed.

Supply only pressure release valve for electric geyser storage type complete all as specified and directed.

Supply only safety valve for electric geyser storage type complete all as specified and directed.

Supply only rubber gasket for electric geyser storage type suitable for 25/50 Ltr cap complete all as specified and directed.

S&F in replacement outer body of electric geyser storage type 25 litre capacity duly white painted complete all as specified and directed.

S&F in replacement outer body of electric geyser storage type 50 litre capacity duly white painted complete all as specified and directed.

Disconnecting & opening of solar water heater storage type of 100 capacity, desclaing with chemical and pressure pump, change the un-serviceable parts, re-assembling the same,testing complete all as specified and directed. Note:- All defective or unserviceable spare parts change during serviceing shall be measure and paid saperately as supply only.

Disconnecting & opening of solar water heater storage type of 200 capacity, desclaing with chemical and pressure pump, change the un-serviceable parts, re-assembling the same,testing complete all as specified and directed. Note:- All defective or unserviceable spare parts changed during serviceing shall be measure and paid saperately as supply only.

S&F in replacement rubber flange of 25mm dia with nut, bolt and washer for solar water heater of 100/200 litre capacity complete all as specified and directed.

Supply only brass flange of 25mm dia with nut, bolt and washer for solar water heater of 100/200 litre capacity complete all as specified and directed.

Supply only copper pipe of existing size and length for collector of solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement nitrate insulation sleeve for solar water heater as per site requirement of 100/200 litre capacity complete all as specified and directed.

Supply only insulation tape and alluminium filing tape for one solar water heater including taking down old unserviceable insulation tape and aluminium filing tape for one solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement heating element 3 KW of existing make for solar water heater of 100/200 litre capacity complete all as specified and directed.

Supply only thermostat 0 to 80 degree 11'' long of existing make for solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement of heat exchanger of existing size and make for solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement of rubber hose pipe of existing size, length and make for solar water heater of 100/200 litre capacity complete all as specified and directed.

Supply only flange gasket (as per sample) for solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement of heat collector strip (as per existing make and size) for solar water heater of 100/200 litre capacity complete all as specified and directed.

S&F in replacement of tank mixture valve (as per existing make and size) for solar water heater of 100/200 litre capacity complete all as specified and directed.

M&L for soldering to copper pipe to rectify the leakage in solar water heater complete all as specified and directed.

Supply only tubing collector (as per existing make and size) for solar water heater of 100/200 litre capacity complete all as specified and directed.

Supply and in repairs tuffen glass of heat collector for solar water heater 100/200 litre capacity complete all as specified and directed.

M/s Raj Construction

ess are electricals and electronic

smc engineering company

BHARDWAJ BUILDERS

M/S MALHI CONSTRUCTIONS

M/S ASHWANI KUMAR AND COMPANY