Kerala

To Be Opened

Works

Repair and Maintenance Works

BARAPOLE SHEP (3x5 MW) REPAIR AND MAINTANANCE OF STOP LOG GATES AND INTAKE GATES (Retender)

Kerala State Electricity Board

Palathinkadavu, Ayyankunnu GP | Kannur, Kerala

Amount: ₹16.4 LCloses: 26 May 202616 May 2026Closed

Timeline

Published28 Apr 2026
Submission Opens2 May 2026
Closed26 May 202616 May 2026
Bid Opening28 May 202620 May 2026

Corrigenda

Corrigendum

1 updatesLatest on 19 May 2026Submission Ends:16 May 202626 May 2026

Date changes

Download Ends16 May 202626 May 2026Submission Ends16 May 202626 May 2026Bid Opening20 May 202628 May 2026

Tender Value

₹16.4 L

EMD Value

₹41,000

Closing Date

26 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

The Executive Engineer

Address

The Executive Engineer Pazhassi Sagar SHEP Chavassery

Work Description

BARAPOLE SHEP (3x5 MW) REPAIR AND MAINTANANCE OF STOP LOG GATES AND INTAKE GATES (Retender)

Tender Information

Tender ID

2026_KSEB_848917_1

Reference Number

01/2026-27/EE/PZY

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Period of Work

180 days

Location

Palathinkadavu, Ayyankunnu GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredGeneral Conditions of Contract (.pdf)

RequiredTechnical specification (.pdf)

RequiredDrawings (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,900

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹41,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Apr 2026

Published

28 Apr 2026

Bid Opening

28 May 2026

Download Starts

30 Apr 2026

Download Ends

26 May 2026

Submission Starts

2 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (18 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Laying and Jointing PVC Pipe. Heading
1.01	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge-50mm average thickness	-	sqm	-	-
1.02	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge-25 mm average thickness	-	sqm	1	-
1.03	Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-chargecomplete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2kg cement per sqm of surface area mixed with specified proportion of approvedpolymer	-	sqm	1	-
1.04	12 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)	-	sqm	-	-
1.05	Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges	-	kg	-	-
1.06	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new P type teflon cladded rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction,approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	1	-
1.07	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction, approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	0.2	-
1.08	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality(btw the joint of two gate shutters ) (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals, supplying and replacing the damaged MS nuts, bolts etc with 6Nos of SS M25 nuts,bolts etc.. at 500mm c/c (include the cost of SS nuts, bolts etc.) , including cost of all materials (including grease), machineries, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction ,approval of Engineer in Charge and as per the approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	-	-
1.09	Dismantling Existing Damaged steel guide roller assembly, Supplying and fixing new steel guide roller assebly of 100mm dia and 75mm width including steel shaft and bearing ,accessories (excluding the cost of MS fixing plates to shutter) in gate shutter and aligning to roller track for free movement of shutter in grooves , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting, labour,scaffolding, incidental and conveyance charges etc for all lift and lead complete as per direction ,approval of Engineer in Charge and as per the approved drawings.	-	set	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.34 MB

Work Item Documents

ConditionsofBidandcontractvol1.pdf

Tender Documents • 1.90 MB

TechnicalSpecificationsVol2.pdf

Tender Documents • 0.88 MB

DrawingsintakeandstoploggatesVol3.pdf

Tender Documents • 4.37 MB

BOQ_1434586.xls

BOQ • 0.39 MB

Corrigendum Documents

etenderdateextention.pdf

PDF • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Laying and Jointing PVC Pipe. Heading
1.01	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge-50mm average thickness	-	sqm	-	-
1.02	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge-25 mm average thickness	-	sqm	1	-
1.03	Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-chargecomplete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2kg cement per sqm of surface area mixed with specified proportion of approvedpolymer	-	sqm	1	-
1.04	12 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)	-	sqm	-	-
1.05	Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges	-	kg	-	-
1.06	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new P type teflon cladded rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction,approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	1	-
1.07	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction, approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	0.2	-
1.08	Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality(btw the joint of two gate shutters ) (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals, supplying and replacing the damaged MS nuts, bolts etc with 6Nos of SS M25 nuts,bolts etc.. at 500mm c/c (include the cost of SS nuts, bolts etc.) , including cost of all materials (including grease), machineries, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction ,approval of Engineer in Charge and as per the approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.	-	metre	-	-
1.09	Dismantling Existing Damaged steel guide roller assembly, Supplying and fixing new steel guide roller assebly of 100mm dia and 75mm width including steel shaft and bearing ,accessories (excluding the cost of MS fixing plates to shutter) in gate shutter and aligning to roller track for free movement of shutter in grooves , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting, labour,scaffolding, incidental and conveyance charges etc for all lift and lead complete as per direction ,approval of Engineer in Charge and as per the approved drawings.	-	set	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Laying and Jointing PVC Pipe. Heading

1.01

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge-50mm average thickness

sqm

1.02

sqm

1.03

Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-chargecomplete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2kg cement per sqm of surface area mixed with specified proportion of approvedpolymer

sqm

1.04

12 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

sqm

1.05

Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

1.06

Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new P type teflon cladded rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction,approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.

metre

1.07

Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals and the MS seal clamp plates in both sides of seal and welding it with the gate shutter (excluding the cost of MS clamp plates), supplying and replacing the damaged MS nuts, bolts etc.. with SS nuts, bolts etc.(include the cost of SS nuts, bolts etc.) in 150 mm spacing , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction, approval of Engineer in Charge and as per approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.

metre

0.2

1.08

Dismantling the Existing damaged Rubber seals of the vertical gates, supply and fixing of new Flat type rubber seal of good quality(btw the joint of two gate shutters ) (conforming to IS11855) having the same dimensions as that of the existing one including making holes in the seals, supplying and replacing the damaged MS nuts, bolts etc with 6Nos of SS M25 nuts,bolts etc.. at 500mm c/c (include the cost of SS nuts, bolts etc.) , including cost of all materials (including grease), machineries, hire charges for lifting , labour ,scaffolding, incidental and conveyance charges etc.. for all lift and lead complete. as per direction ,approval of Engineer in Charge and as per the approved drawings.The leak per meter length of seal shall be within permissible limit after fixing the new one.

metre

1.09

Dismantling Existing Damaged steel guide roller assembly, Supplying and fixing new steel guide roller assebly of 100mm dia and 75mm width including steel shaft and bearing ,accessories (excluding the cost of MS fixing plates to shutter) in gate shutter and aligning to roller track for free movement of shutter in grooves , including cost of all materials (including grease), machineries,cost of welding charges, hire charges for lifting, labour,scaffolding, incidental and conveyance charges etc for all lift and lead complete as per direction ,approval of Engineer in Charge and as per the approved drawings.

set