Annual maintenance of TTD Kalayanamandapam at Kuppam Rest House at Gudivanka in Chittoor district for the year 2026-27

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work in Ordinary soil- By Manual means upto 3m depth.

Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm (0.54 Cum), 20 mm (0.27 Cum), and 12 mm (0.09 Cum) hard broken granite crushed metal from any source confirming to the relevent ISI standards for foundations etc., laid in layers of not more than 15 cms thick each, well compacted including curing, cost and conveyance of all materials etc., complete -using concrete mixer.

Cement Concrete (1:2.5:5) using 20 mm ( 0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevent ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing cost and conveyance of all materials etc., complete

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480Cum,6mm HBG Crushed metal 0.320Cum,sand 0.400Cum and cement 350Kgs with water cement ratio of 0.53(185.50 ltrs/Cum of CC) etc., from any source confirming to the relavant ISI standard including cost and conveyance of all mterials like cement, fine aggregare (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing,centering charges,shuttering chargesc etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, for finished item of work.

- do - for 50mm thick precast slabs (Data as per TTD SSR (7.3.4.C) )

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars of Fe - 500 grade as per IS 1786-1979) of different diameters below 36 mm diametre for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126).

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials, as directed during execution and complying with standard specifications etc., complete.

For Gudivanka Rest house

Construction of pre-cast cement block masonry in C.M(1:8) Using pre-cast cement blocks made with C.M(1:8) commercial quality of size 290x190x140mm or any approved size including curing cost and conveyance of all materials as directed during execution.

Plastering in Cement mortar using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

In CM (1:5) 20 mm thick

For Gudivanka Rest house

In CM (1:5) 12 mm thick

For Gudivanka Rest house

In CM (1:3) 12 mm thick

For Gudivanka Rest house

In CM (1:3) 20 mm thick

For Gudivanka Rest house

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for verandah openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint in all shades grade -I quality over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supplying of the following materials

Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1mm to 0.8mmthickness)

Anodized Aluminum Aldrop of size 250 mm long with ISI mark IS 2681.

Anodized Aluminum Aldrop of size 200 mm long with ISI mark IS 2681.

Anodized Aluminum tower bolts of size 10 mm dia x 200 mm long with ISI mark IS 204.

Anodized Aluminum tower bolts of size 10 mm dia x 150 mm long with ISI mark IS 204.

Anodised Alluminium Door handles of size 125 mm long with ISI Mark IS 208.

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply of Pin headed Glass 4 mm thick as directed the department

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6 The Excavator- Loader (JCB) should have the Tacho metre and it should function properly

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply, laying and jointing of 110 mm dia 3M Single socket 4 Kg /Sqcm PVC/SWR pipe ISI of any ISI maeked including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

For Kuppam KM (Nominal qty)

For Gudivanka Rest House (Nominal qty)

Supply, laying and jointing of 75 mm dia 3M Single socket 4 Kg /Sqcm PVC/SWR pipe ISI of any ISI maeked including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

For Kuppam KM (Nominal qty)

For Gudivanka Rest House (Nominal qty)

Supply of the following UPVC/SWR Pipe fittings of ISI Brand).

110 mm dia Door bend 87.5 degrees.

110 mm dia Plain bend 87.5 degrees.

110 mm dia - Single Tee with Door

75 mm dia Door bend 87.5 degrees.

75 mm dia Plain bend 87.5 degrees.

75 mm dia Coupler.

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply and Fixing of premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" of Ashirvad Flowguar SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS15778:2007)

22.20mm ODPipe - SDR 13.5

28.60mm ODPipe - SDR 13.5

54mm ODPipe - SDR 13.5

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply and fixing of glow sign radium stickered Text / sign (or) picture of different sizes directly on the glass door partitions/Sheets/Floors/Roads/walk ways/walls etc., as directed during execution using glow sign radium stickers one layer including cost and conveyance of all materials etc., complete.

Supply of the following labour for the maintenance of the miscellaneous works at in and around theTemple premises as and when required etc. complete as directed during execution by the department.

Masion/ Carpenter/ Plumber /welder Stone cutter 2nd class

Man and woman mazdoors

Painting single coat for Internal walls - old with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting single coat for External walls - old with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- Single coat for old wood work

-do- Single coat for old Iron Work & old plastered surface

Supply of 4 Core 2.5 Sq mm ISI marked, Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: As per list of recommended brands as category I

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Fabrication, transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No. Indication lamps (R-Y-B) with switch control - 1set. Voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor. Upto 7.5 HP with DOL Starter of. Makes: L&T

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supplying, fabrication and placing in position of M S truss work by using M S pipes, angles, channels, sections, M.S plates etc., of different diameters, sections and sizes for truss work including cutting, welding, grinding, finishing and placing in position for required spans including cost of fabrication charges welding rods, power rods, power charges and fixing in position by using chain pully blocks derk pole arrangements and cranes etc., complete and as directed by the department( TATA/ VSP/SAIL/ JSW Neo steel manufacutred by JSW steel Ltd. makes)

Supply & Fixing of CPVC Ball valves

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

For Kuppam KM & Gudivanka Rest House (Nominal qty)

Hire charges of Core drilling machine / Drilling equipment

Providing and laying water proofing cum heat insulation treatment with Home Shield Polurethane (PU) Roofkoat (Berger or equivalent) over existing roof slab, all as directed by Engineer-in-charge and as per the following specification: Surface Preparation: 1.Clean the Surface thoughly to make it smooth and free of any foreign material 2.Water pounding test for Mother slab to identify the leakages points before starting the water proofing treatment work 3.Injection grouting should be done for all leakages point indentified and inject the cement slurry dmixed with injection grout admixture, using pressure grouting machine till the rejection of material from the nozzle. 4.Reparing od construction joints by chasing with cutting machine and fill the same with polymerized mortor in C.M91:4) admixture with Advanced Latex plus as per the specified company instructions. Water proofing Application with PU Roofkoat 1. Apply a self-priming coat of PU Roofkoat after diluting with clean water @50%(1:0.50), 2.Allow to dry for 4 to 6 hours 3.Ally 1st coat of PU roofkoat [email protected] per sqm 3.Allow to dry for 4 to 6 hours 4.Apply 2nd caot of PU roofkiat wuithout dilution @ 0.40Kg per Sqm The cost inclusive of all required materials such as Home Shield Polurethane (PU) Roofkoat (Berger or equivalent),Injection goruting with required materials, reparing construction joints with required materils and all labour charges for above activities etc., complete as directed during execution.