REPAIRS TO ELEVATION GLAZING AND ALLIED WORKS AT NAUSENA BAGH AND NOFRA

Amount

M&L in repair work for Anodised aluminium frame for doors, windows, ventilators with one or more rebates upto eight storyed building including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer in charge.

M&L in repair work for Anodised Powder Coasted alumunium (min Thckness of powder coagting 50 miscro) work for fixed portion with extruded built up standard section/ appropriat Z, section and other section of approved make confirming to IS : 733 and IS : 1285 dash fasteners of required size including filling gape at junction ie.e top, bottom and side with required EPWDM rubber/ neoprene gasket etc aluminium sec shall be smooth, rust free straight, mittred and jointed mechanically wherever required incl cleat, angle aluminium snap beading for glazing/ peneling, C.P. brass/ stainless steel screw, aluminium sections weighing 0.55 Kg/m upto eight storeyed building including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting, complete all ass per architectural drawings and the direction of Engineer-in-Charge and specified. (Note glass panes shall be measured & paid for separately.

M&L for 4.8mm thick Sheet glass, ordinary quality and glazing with Aluminum glazing clips in square n exc 0.5 sqm pane upto eight storyed buildings complete all as specified and directed by Engineer in charge.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones up to eight storyed buildings complete all as specified and directed. Note : Reglazing shall be measeured seperately

M&L in repair for securing existing Aluminium Glazing frame upto eight storyed buildings including drilling, Screwing, joining cleats, glazing, snap beading etc complete all as specified and directed by Engineer in charge. Note : Cleats, glazing clip and Al snap beading shall be measured seperately in Kgs.

M&L in repair for 1mm thick Mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed by Engineer- in-charge.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work con- forming to Fe.290.Gde-E-165 complete all as specifed and as directed.

M&L for Preparation of old wood surfaces and applying one coat of Synthetic Enamel Paint over 10cm width or girth Complete all as specified and directed by Engineer in Charge.

S & F in repair 30 mm thick flush shutter solid core construction ,with block board core & ply wood face pannel s commercial tye on both sides opening as per specification & drawing complete all as specified and directed

M&L for Preparation of new wood surfaces and applying two coats of Synthetic Enamel Paint over one coat of pink primer incl 10cm width or girth Complete all as specified and directed by Engineer in Charge.

S&F in repairs aluminium extruded section door closer hydrau- lically regulated, designation No.1, universal type, suitable for door shutters up to 700 mm in width and of weight between 35 kg and fixed .

S&F in repairs aluminium extruded section door closer hydrau- lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed .

Supply and fixed in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel screws to MS door.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410 -W (Gde- E- 250) quality- A-, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any thickness guage including nanital or similar pattern roof coverings as in roof coverings complete all as specified and directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, Complete all as specified and directed.

M&L for prepration of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of sythetic enamel apint over a coat of red oxide primer complete alll as specified and directed by Engr in Charge

M & L PCC 1 : 4 : 8 Type D2 ( 40 mm graded aggregsate) as in foundation and mass concrete. complete all as specified and directed.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling etc. Complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered)

M&L Walling of Porbandar stone masonary class A1 well bounded and bedded in cement mortar 1:6 brought upto courses, Complete all as specified and directed.

M&L Walling of Porbandar stone masonary class A1 well bounded and bedded in cement mortar 1:6 brought upto courses, except stone, Complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 Type B0 12.5mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges in, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L Preparation of newly plastered surfaces and applying two coats of OBD on walls, Complete all as specified and directed.

M & L in repairs providing precast cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in jallies, 40mm thick(measured solid), including all mouldings, set in cement mortar 1:4, complete all as specified and as directed.

NOTE : (a) The above work is to be carried out in building upto G+8 stories and also quoted rates are deemed to includemulti story factor scaffolding required in any, No extra payment shall be admissible on this account. (b) Contractor shall arrange all safety equipment during the executiuon of work and also fully responsible for safety measures of labours/painters.

Bharat Enterprise (BID ID -3403740)

AADESH CONSTRUCTION (BID ID -3403365)

m/s prakash enterprise (BID ID -3391631)