CA NO CWE/AMB/SOUTH-03 OF 2025-26 PROVISION OF CERTAIN BLDG WORKS IN UNIT LINES UNDER B/R-I FOR GE (SOUTH) AMBALA CANT

Amount

M&L for Cement concrete 1:2:4 (12.5 mm graded stone aggregate) in flooring over cement slurry after cleaning debris, broken PCC, loose material etc, in alternate bays (not exc 3m in any panel size) including cost of formwork etc and preparation of top surface rough for receiving mastic floor complete all as specified & as directed.

M&L for 40mm thick bitumen mastic flooring grade IV as per specifications laid in IS-1195 & laid in accordance to IS-1196 including testing of material & cost of T&P complete all as specified & as directed. Note:- (i) Composition of material shall be done as per IS specifications by the skilled applicator. (ii) The laying of flooring shall be carried out through the experienced labour as approved by GE.

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on surface of any description of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified.

M&L for preparation of new plastered surface & applying three coats of white wash on walls complete all as specified & as directed.

M&L for complete removing all existing treatments & applying three coats of white wash complete all as specified & as directed.

M&L for preparation of new plastered surface & applying two coats of cement based paint over one coat of primer complete all as specified & as directed.

M&L for complete removing all existing treatments & applying two coats of cement based paint complete all as specified & as directed.

M&L for preparation of old steel surface surfaces over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified & as directed.

Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.50m wide, n exc 1.50m in depth for foundation etc n exc 10 sqm on plan and getting out for in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone agg) as in foundation filling and mass concrete etc complete all as spd and directed.

M&L Brickwork with fly ash bricks (old size) straight or curved on plan exc 6 m mean radius ,built in CM 1:6 complete all as specified and directed.

Material and labour for brick work with fly ash bricks (old size), straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 cement mortar etc complete all as specified and directed.

M&L for RCC (Design Mix) M-25 for foundation ,including foundation raft footings , foundation for beams, plinth beams, bases for column, etc basement slab ,underreamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Design Mix) M-25 for columns ,pillars, piers, post and struts etc complete all as specified and directed.

M&L for RCC (Design Mix) M-25 for lintel beams, roof beams cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC (Design Mix) M-25 for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for formwork (rough finished) to sides of concrete foundations, footings, bases of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to all as specified and directed.

M&L for Formwork(rough finished) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished flat surfaces of concrete complete all as specified and directed.

M&L to Formwork to fins, louvers, fascia/chajja etc. rough finished flat surfaces of concrete complete all as specified and directed.

M&L to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces of concrete complete all as specified and directed.

M&L reinforcement TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping staps/lintels and including mild steel wire not less than 0.9mm dia or securing with clips complete all as spd and directed.

.-ditto- all as per item No 24 above but 6mm to 10mm dia and over as in stirrups, spaces and binders complete all as spd and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm of any type of soil complete all as specified and directed.

Removing excavated material of soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling of brick work or concrete surfaces after hacking in CM 1:3 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth (without using extra cement) including provision of 300 wide chicken wire mesh on junction of concrete & brick work complete all as specified and directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra cement) including provision of groove in plaster at junction of brickwork & concrete surfaces complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, spreading and levelling in layers and well ramming including watering as required complete all as specified and directed.

M&L for 200mm thick hardcore broken stone or boulders of gauge exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

M&L for cement concrete 25 mm thick Type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including screed bed or bedding layer of 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface dados and skirting etc 350 x 250 x 7mm /450 x 300 x7mm thick over 10 mm thick rendering CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M and L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F for 3 mm thick figure glass glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified and directed by Engineer-in-charge.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, and fixed, type C-21 complete all as specified and directed.

S&F 125 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 125 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F for vitreous China bowl urinal flat back, size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F for vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

M&L for PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kgf/sqcm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length of 600 mm complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F for 20mm dia ball valves high pressure of PTMT with Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 210 gms complete all as specified and directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 15mm dia of bore stop valves/angle cock, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F for 15mm dia of bore Bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F for 15mm dia of bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

M&L for Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

S & F for 32 mm bore Waste coupling of PTMT (half full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) including PVC waste pipe 32mm dia complete all as specified and directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S&F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and directed.

M&L for 110mm bore PVC (SWR) `P' trap complete all as specified and directed.

M&L for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified and directed.

M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints fixed to walls completed all as specified and directed.

M&L for 75 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified and directed.

M&L for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for 75 mm dia of bore PVC (SWR) floor trap plain with grating/ grating doom including jointing with solvent cement complete all as specified and directed.

M&L for 110mm PVC (SWR) reducers complete all as specified and directed.

M&L for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

Material and labour for providing 3 mm thick APP (Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyester matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscosity 70-160 Cps. over the primer coat, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete applying two coats of bituminous based Aluminium paint @ 0.2kg/sqm complete over and including 10mm thick cement plaster in CM (1:4) on RCC roof slab including cleaning of existing using WPC @ 2% by wt of cement complete as per standard practice as per manufacturer's instructions all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under:- (i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms. (ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexibility up to 20º when tested in accordance with ASTM (D-5147) (iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only.

Cutting into existing manholes for connecting internal dia of pipe 150mm in new drain, making good to pipe and rendering cutting out existing benching for channel (1/2 or 3/4section) in cement concrete 1 : 2 : 4 type B-1 by repairing benching as required complete all as specified and directed by Engr-in-Charge.

Supply and laying salt glazed stone ware drain pipes 150 mm dia (internal) grade 'A' laid in trenches and jointed in cement mortar 1:1 including testing complete all as specified and directed.

Plain cement concrete (1:4:8), type D-2, using 40 mm graded stone aggregates as in concrete bed to drain pipes of 150 mm bore laid to falls in trenches in any depth including packing under and haunching against the sides of pipes with concrete after the pipes are laid and tested complete all as specified and directed.

M&L precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes including necessary form work and placing of manholes cover in position complete all as specified and directed by Engr-in-Charge.

M&L for 150 mm thick hardcore broken stone or boulders of gauge exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base of floor a complete all as specified and directed.

M&L for Sand filling under floor including watering and consolidation in required thickness complete all as specified and directed.

M&L for red or yellow coloured machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M 35 grade with grey cement & pigment and laid in position/pattern all as approved and directed by Engineer-in-Charge.

Material and labour for providing and laying of precast cement concrete solid concrete block, type B-1, 1:2:4 (using 20mm graded stone aggregate) confirming to IS 2185 (Part-I) 2005 of 45/30 cm high, 10 cm thick and of suitable width including chamfers, weathering, throating etc as in kerb continuous edging jointed in cement mortar 1:4 and struck flush pointing as the work proceeds and finishing with neat cement flush joint etc complete all as specified and directed.

Excavation over areas n. exc. 1.5 m deep & getting out soft/loose soil complete all as specified and directed.

Excavation over areas for additional 1.5m or part thereof in depth beyond 1.50m complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius , built in 1:6 cement mortar complete all as specified and directed.

S&F CI pipe 100 mm complete fixing complete all as specified and directed.

M & L MS TMT Bars 6 to 8mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel/ drains inside the manholes, coping, benching and the like complete all as specified.

Extra over for forming fair finished to drains or channels n exc 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends complete all as specified.

Reinforced concrete pipes, 150mm bore , class NP3 , laid & jointed complete with collars laid in trenches at any depth including jointing & testing complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested in cement concrete 1:3:6 type C-2 & having 150mm bore complete all as specified and directed.

Supply & filling of broken brick bats in soakage well of 2nd class bricks complete all as specified and directed.

Formwork to sides & soffit of floor & roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including, supports overhang etc fair finished complete all as specified and directed.

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:6 complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, stanchions complete fair finished complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white colour (including fixing bolts, but excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F PVC Connections 15 mm size with PTMP nuts of length 450mm complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

M&L for salt glazed stoneware gully trap, square or round moulded type 'P', 100x100mm size complete all as specified and directed.

S&F for CP health faucet including 1.5 mtr long flexible tube complete all as specified and directed.

S&F Providing & fixing of ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitable provision as in ventilator in toilet/bathroom/staircase (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills etc., and cutting chases for concealed water tubing and making good complete all as specified and directed.

Material and labour for treating top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 lit of emulsion per sqm of vertical surface ( area of substructure in contact with backfill to be measured) complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls/ ceiling and applying two coats of oil bound distemper with hand roller , over a coat of alkaline resistant primer complete all as specified and directed.

M&L for 18 to 20mm thick granite stone of approved shade (table rubbed, moulded & polished) in cooking platforms, on counters and like bedded with & including 20mm thick screed bed in CM (1:4) & jointed with grey cement slurry @ 3kg/sqm and pointed with white with admixture of pigment to match with shade of granite stone complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including PVC conduit not less than 25 mm dia with and including accessories, concealed on wall/ and surface on ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately.

Description all as per item No 112 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 112 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

All as per srl item No 112 above but point wiring for one socket out let 16 & 6 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.

Supply and fixing modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fixing modular switches, one way, 16 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fixing socket outlet 2/3 pin combined 2 module, 6 amps, 230 volts modular type ,ISI Marked, complete all as specified and directed.

Supply and fixing socket outlet 2/3 pin combined 2 module, 6Amp / 16 Amps, 230 volts modular type ,ISI Marked, complete all as specified and directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified.

Supply and fix LED lamp 12 watt for batten fittings complete all as specified and directed.

Supply and fixing of LED luminaries of capacity 20 watt integrated aluminium batten with including Opal diffuser complete all as specified and as directed.

Supply and fix surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light complete all as specified and directed.

Supply and fixing Bulk Head Fitting 10 Watt and connected with copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified & directed.

Supply and fixing of bracket for security light made up of 40/50mm dia suitable for security light, 0.6 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fix LED security light luminaire 30/35 watt , pressure die cast aluminium housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiple LEDs not less than 2 W each and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed.

Supply and fixing SPN distribution board 8 way, double door, IP 43, as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioningcomplete all as specified and directed.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SP and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Material and labour for Point wiring using approved colour coding as per IS with stranded copper conductor 4 Sqmm (nominal area ),single core ,FRLSH PVC insulated and unsheathed stranded cable 1100 volts grade ISI-694 marked in and including heavy duty ,PVC concealed conduit ISI marked for one industrial type metal clad earth plug and socket out let with earth dolly including FRLS PVC Insulated unsheathed copper conductor 4 Sqmm nominal cross section area as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed.

Supply and fix sheet metal enclosure with two pin & earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230 Volts of size 300 mm Sweep ,1400 RPM, double ball bearing, heavy duty with blades, frames and louvers including fixing arrangement, Cutting holes in brick walls of suitable size and making good to the disturbed surface complete all as specified and directed.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of size 4.0 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge. Note : The rates for earth work, GI protection pipe, funnel, wire mesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, heavy duty electric cable 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

Supply and fixing for GI protection pipe of 50mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole, complete all as specified and as directed.

Material and labour for unwashed dry sand cushioning for cable protection, filling in trenches/ducts, complete all as specified and as directed.

Material and labour for old size bricks sub class 'B' for cable protection laid along length of cable complete all as specified and as directed.

Supply and lay Tubes, `medium grade', galvanised, 40 mm bore, with all fittings; laid in trenches/ fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and lay Tubes, `medium grade', galvanised, 25 mm bore, with all fittings; laid in trenches/ fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed of 25 mm dia complete all as specified and directed.

M&L for cutting/tapping existing CI/GI pipe of any 100/80 mm bore in position for insertion of new TEE on any bore of pipe complete all as specified and directed.

Supply and fix LED lamp 9 watt for batten fittings complete all as specified and directed.

Supply and fixng 1100 volts grade heavy duty cable PVC insulated aliminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections susupended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circulat of size 10 Sqmm including all incoming anf outgoing connection with proper size thimble complete all as directed and specified.

Swami Enterprises (BID ID -3375616)

Bairagi Builders (BID ID -3383478)