BEATIFICATION/ PLACEMAKING WORK AT T.P.S NO 33 ( DUMBHAL), F.P NO R-3/P IN SOUTH EAST ZONE(LIMBAYAT) , SURAT (2ND ATTEMPT).

NAME OF WORK: Beautification/Place making work at T.P.S. No. 33 (Dumbhal), F.P.No. R-03/P in South East Zone (Limbayat), Surat.(2nd Attempt)

Item No. DTS NO SOR Description

Qty. Rate Unit Amount

PART F RETAINING WALL

Excavation for foundation includ .sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift , watering etc . Comp. (A) Loose or Soft soil -With Manual

Providing & filling in plinth with yellow soil or selected soil in

2 2 SMC (11) layers of 20 cm. Th'. Incl. watering, ramming & consolidation etc. 370.77 289.06 C.M

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

3 3 SMC (5) stone agg 20m.m Nominal size )&curing comp. excl. cost of form 43.88 3005.76 C.M.

work in :(a) foundation & Plinth

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M35 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. (A) Foundation footing base coloumn and mass

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M35 Design mix concrete as per IS 456:2000

5 5 MIX DESIGN (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. ( A column )

Cross section area more then 0.12 sq mt 15.33 9452.49 C.M.

( B ) GROUND BEAM

Cross section area more then 0.12 sq mt 20.21 7260.79 C.M.

( D ) LINTEL / COPPING 8.66 9680.95 C.M.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding & placing

in position etc. comp. Upto

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C .M. 1:3 (1 cement:3 sand) & 8 mm. th.

8 8 SMC (28) (MR) Finishing coat of C .M. 1:1 (1cement: 1 sand) apply thick cement 1815.00 324.00 S.M.

slurry and apply roller horizontal as well as vartical ( two times )

up to good quality and size of grain in elevation as per directed by

engineer incharge.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

9 9 SMC (84) make for soil and waste discharge system at all floor levels incl. 200.00 444.00 R.M.

All fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.).

(B) 110 mm. Dia.

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor

Providing & Applying (Plasto Elastic Coating Based On UV-

Curing Acraylic Dispersion With Excelent Crack Bridging ) &

Anti Carbonation Properties :- (1) Apply

One Coat Of Exterior Acrylic Water Base Primer (Asian / Dulux)

As Per Manufactuters Specification & Directions In Shade &

colour approved by architects, on exterior surfaces of the building

including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers.

11 11 RA-1 Surface Preparation :

Surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease,fungi, algae and flaking paint. This can be achieved

by brushing with a wire/stiff coir brush, followed by water jetting

if required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow

it to dry for 18 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

anti carbonatin paint Apply 1st Coat Can Be

Applied Without Priming After 6Hours Drying Period. 1815.00 210.00 S.M.

Apply Secound Coat But Mast Be

Protected From Rain For Atleast hours. Applied By

Brush/Roller Or Airless Spray

PART A:- WALK WAY

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt. lead.

Providing & laying Granular sub base (GSB)confirming to Grading-V of

Table 400.0 of compacted thick of 150mm with specified graded stone metal and

SMC (9) sand mixed in place and laid with mechanical means spreading with motor

2 13 Ground grader and compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD including all

development material, labour, machinery with all leads and lift etc. complete.

Providing & filling in plinth with yellow soil or selected soil in

3 2 SMC (11) layers of 20 cm. Th'. Incl. watering, ramming & consolidation etc.

Providing & laying cement concrete 1:4:8 (1 cement : 4 sand :

4 14 SMC (4) graded stone agg . 40 mm nominal size ) & curing comp . incl.cost 86.63 2680.21 C.M.

of form work in (A) Foundation and Plinth

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5

SMC sand:3 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

5 15 (10)Ground technique including floating surface with a skim powder floater, curing etc. 129.94 5981.00 C.M.

development complete.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding & placing

in position etc. comp. Upto

Providing 100mm thick readymade C.C. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

7 16 SMC (6) vertical position, including filling joints in C.M. 1:1 (1 part of 600.00 228.00 C.M.

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part

of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

8 17 SMC (17) fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff 360.00 81 0

coir brush, followed by water jetting if required. Fill up all minor cracks

and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max

PART -A FOR SELFIE POINT

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

the surplus excavated soil as directed within a lead of 50 M.

For following diameter of piles.

Providing & laying cement concrete 1:1.5:3 (1 cement : 1.5 sand :

3 graded stone agg. 20 mm nominal size) & curing comp.

2 19 SMC (6) Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing & laying ordinary cement con. 1:1.5:3 (1 cement:

sand:3 graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incl.. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08s.mt- Ground Floor 0.71 8174.41 C.M

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 7.10 7086.88 C.M

(E) CHAJJAS: -- G.F 2.30 5512.83 C.M

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

SMC (28) Finishing coat of C.M. 1:1 (1cement: 1 sand) apply thick cement

(MR) slurry and apply roller horizontal as

well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding & placing

in position etc. comp. Upto

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

Providing & Fixing First Class Red burnt Superior Quality

200x80x10 mm (Abrasive Resistant, High Density, High

Strength), Colour Brown having crushing Strenght 35 kg/mᶟ.

7 21 RA-1 Vertically fixed with Non Shrink grout & Joints are till up. with 42.00 1674.43 S.M

the same as Natural Exposed Bricks & clean the wall as per

directed by Engineer incharge / Consultant. (Basic Rate -

Rs.1222 per SM)

Providing & laying Granular sub base (GSB)confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

9 3 SMC (5) stone agg 20m.m Nominal size)&curing comp. excl. cost of form 20.25 3005.76 C.M

work in :(a) foundation & Plinth

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete.

Painting two coat (inlcuding one coat of Primer) on new steel and

other metal surface with Epoxy paint, burshing to give an even

11 23 RA-2 shade including cleaning the surface of all dirt, dust and other 180.00 196.00 S.M

foreign matters as per Insatruction by Architect and Engineer-in-

Part-01 Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected Open/ concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

1 push & accessories and earth continuity of following type, 20 530.25 Point

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories - Cat III

Point wiringf or Tissino/Modular secondary light point with2

1.5sq .mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLSPVC insulated multi strand copper

wires, in below type of pipe to beerected complete with earth

continuity and necessary connection with primary light with

accessorieserectedon Metal /PVC/ wooden box covered with

3mm thick PC(Polycarbonate) /Acryli sheet for

open/concealed wiring .withnecessaryLampholder/ceiling

rose / H.D.Connector as directed.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

Open/ concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic box

3 1-2-3 covered with appropriate front plate modules erected on / in wall 4 558.53 Point

/ ceiling as per pi pe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (a) with medium class

Rigid PVC pipe and accessories Cat. III

(f) with medium class Rigid PVC pipe and accessories

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories

[III] For 16A Plug with 2-4 sq.mm Cu. Wire Cat III

(f) with medium class Rigid PVC pipe and accessories

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

connection. As desired by Engineer In charge

(7) Blank Plate Single Cat. III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

8 1-4-1. conductor FRLS PVC insulated stranded wire of green color for 50 68.68 Mtr.

earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

9 1-4-1 conductor FRLS PVC insulated stranded wire of green color for 30 90.90 Mtr.

earth continuity of following size (f) with medium class Rigid PVC

pipe and accessories

(c) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

10 1-4-2 insulated stranded wire of green color for earth continuity of 20 124.23 Mtr.

following size (a) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

11 4-5-8. necessary connecting accessories of same

materialat requireddepthinexistingtrench for

layingof cable. belowground / roadsurface

for enclosing cable

(C))90 mm outer dia 50 112.11 Mtr.

(D)120 mm outer dia. 50 160.59 Mtr.

Part-02 Indoor Light Fixtures

SITC of IP65 Surface / suspension mounted waterproof luminaire,

Polycarbonate housing and linear prismatic ribbed cover

providing excellent distribution of light, Convenient

Polycarbonate fastening clips and hinged diffuser to make it easy

11 MR to replace lamps, Press fit CRCA gear for ease of maintenance. 2 2340.00 Each

complete with tube holders, lead wire and connections. with

wall/Ceiling Mounting Clamp. (Min Two Clamp for each tube

With 1 LED Tube 1800 to 2100 Lumen

Part-03 LT Switchgear, Distribution Boards & LT Panel

busbar chamber confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door with rubber

gasket and necessary busbar supports with COPPER busbar

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulation

tape for phase sequence, three phase & neutral each suitable for

following current capacity with necessary painting mounted on

wall or pedestal frame of required size with necessary

(A) Suitable for 63/100 Amp. capacity

Providing and erecting Sheet Steel powder coated MCB

Distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 8623-1 &

without MCB to house appropriate nos. of MCBs. (The DBs should

be used of same company of MCB to be used)

(A) Single phase incoming and horozontal single phase outgoing

(b) Sheet Steel Double Door (IP-43) (iii) 6 way

Miniature circuit breaker single pole 0.5 A to 2A suitable to

operate on 240 V A.C. system and having overload and short

14 3-10-1(A) circuit tripping elements and breaking capacity 10 KA to be 2 318.15 Each

erected in existing M.S. box confirming to IS 8828/1996 with

ISI mark. (For each Fitting) Cat.III

Miniature circuit breaker single pole 6 A to 25 A suitable to

operate on 240 V A.C. system and having overload and short

15 3-10-1(B) circuit tripping elements and breaking capacity 10 KA to be 2 131.30 Each

erected in existing M.S. box confirming to IS 8828/1996 with

ISI mark. Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

6 to 32 Amp. Cat.III

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V. having

characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max.

rating erected as directed. Cat III

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on 3 phase and neutral 415V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(iii) 63 Amps. FP - Cat III

Part-04 Earthing System

Providing & Erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried

19 3-14-6-A+C in specially prepared earth pit complete with necessary 8 SWG 1 636.30 Each

earth wire with using salt and charcoal / coke as required for pipe

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make safe Earthing Electrod consisting Pipe-in-Pipe

technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with

20 3-14-10 high charge dissipation suitable for following type of applications 1 6893.25 Each

with chamber and heavy duty cover (Approved OEM has to

submit test certificate including value of earth resitance of

[A] For Electrical Installation up to 440V

-Length of Pipe : 1 Mtrs.

-Back filling Compound :1 nos Bags of 15 Kg.

Part-05 Outdoor Lighting

Supply of approved make GRP / FRP Pole having following

specifications: GRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in one

21 6-1-7 piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive &

shock proof Pole should be provided with FRP Anchor Base and

it should be heavy duty, or MS Material duly painted with Epoxy

Pole should be flame retardant as per IS 6746. Resin used shall be

UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection

of the pole shall not exceed more than 10% of the length of pole

22 6-1-7 CONTI for the given load“? Pole should be generally made as per the

dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C

latest version or ASTM D 4923/01 . The size of pole and type of

installation are as below . 1) Suitable for base plate mounting

single arm Bracket.

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx.

Weight of Pole 19 kg approx. (Without Base)

Anchor Base (Size 250X250 & 12mm th.)

[F] Overall length of 5 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole

kg approx. (Without Base) Anchor Base (Size 250X250 & 16mm

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight

of Pole 32 kg approx. (Without Base) Anchor Base (Size 300X300

SETC of GI bracket for GI pole having following arm bracket &

26 MR spread 6 910.00 Each

Single arm bracket having spread of 0.5 mtr.

SETC of GI bracket for GI pole having following arm bracket &

27 MR spread 1 1310.00 Each

Double arm bracket having spread of 0.5 mtr.

Providing & Constructing M-150/ 1:2:4 CC foundation including

28 6-3-4. excavation upto 6 Meter Pole ( Foundation size :- 450 X 450 X 6 953.44 Each

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with bakelite connector strip 5way (3P+N+E) & hinged

29 6-4-3. doors having locking arrangements with mounting clamp with 6 606.00 Each

nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(b) 250mm x 200mm x 100mm [deep]

(C) LED fitting comprises of Copper dust finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate,

30 2-17-2 pipe arrangement for vertical mounting,open construction driver 4 6509.45 Each

and accessories wired upto terminal block. IP65 (b) Min. 32 W to

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux

(U.S.A.) make LED used for luminaire. ( Each fittings required LM-

79 & LM-80 certificates)

(A) Street Light (IP-65), Surge -4KV(Internal) & 10KV (External)

(i) above 36 watts to 48 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV & 10KV (External)

(e) above 48 W to 60 watts Cat-III

SITC of CCMS Section Pillar with System with Communication

Facilities and Centralized Control and Monitoring (cluster/ group

33 MR control) (Rate Includes Sim & Data Charges) 1 60283.00 Each

Painting the number and words for (st.light pole numbering and

back ground of colour as per Zone Code) inventory Identification

on erected fittings/ equipment's or such accessories as may

34 MR required with good quality of enamelled paint. The numbering 6 58.08 Each

and back ground of colour shall be as per Zone Code on.

(i) up to 20 characters, Up to 75 mm Height.

Part-06 LT Cables & Cable Termination

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

35 4-3-3. with necessary clamps or in existing trench / pipe of following 20 330.27 Mtr.

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

36 4-3-4. with necessary clamps or in existing trench / pipe of following 50 144.43 Mtr.

(b) 4 core 6 Sq. mm

Supplying & erecting Flexible PVC insulated multistrand multicore

1.1 KV grade ISI marked Copper Wires of following Size to be

erected as directed.

h) 2.5 Sq.mm 3 core round PVC sheathed

Making trench in soft soil of suitable width of 90 cms deep for

laying cable or locating the fault all over the run and backfilling

the same and making the surface as normal ground.

Providing & laying 150 mm dia. R.C.C. hume pipe for cable to

be laid 90 cms below ground across the road crossing or on

40 4-5-7. floor with necessary material in approved manner aand 20 310.07 Mtr.

making the ground as per original. (E)150 mm dia

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

(c) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

43 4-6-2. out going tails, insulating tape etc for following size of cables. 2 76.76 Nos

(a) 3 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

44 4-7-1. pressure tool & connected to switchgear terminals with 4 6.06 Nos

brass/cadmium plated nut bolts in an approved manner.