ADDITION ALTERATION OF EXISTING EQUIPMENT ROOM OF AFNET IN 259 SU, PROVN OF BIRD PROOFING NET FOR LRC AND OPS SHELTER SHED IN 259 SU AND PROVN OF CHAIN LINK FENCING HARD STANDING AROUND THE BPI 259 SU AT AF STATION BAREILLY

Amount

Taking down cement plaster including racking out joints, hacking for keys and scrubbing down with water complete all as specified and as directed.

M&L for rendering 15 mm thick in patch in cement mortar (1:6) on fair face of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plasterd surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.

Taking down chowkhat or frame with shutter ( without taking off shutter from the frame) area exc 1.5 & n exc 4 sqm each complete complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n exc 1.5 sqm each complete all as specified and as directed.

S & F factory made PVC door frame of size 50 x 47mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150mm long brackets of 15 x 15mm MS Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall suing MS screw of 65/100mm size complete as per manufacturer specification complete all as specified and as directed.

S&F 30mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 x 19mm style and 15 x 15mm for rail covered with heat moulded PVC channel of 5mm thick and 75mm, 125mm, 125mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc including aluminimum mongry complete all as specified and directed by Engineer-in-Charge. Make :- Neelkamal/Sintex.

M&L 2nd class hard wood for Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed complete all as specified and as directed.

M&L for flush shutters, 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm long mild steel butt hinges, cold rolled, medium type, and fixed complete all as specified and as directed.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm wirdh or girth with two coats of synthetic enamel paint (1st quality) over a coat of pink primer including preparation of surface complete all as specified and as directed.

M&L for painting to old steel surfaces of any description over 10cm wirdh or girth with two coats of synthetic enamel paint (1st quality) over a coat of zinc chromate primer including preparation of surface complete all as specified and as directed.

M&L for preparing surfaces of new wood and wood based materials, steel and iron work, new or old, of any descrition and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L for treating small article such as hold fast etc area n.exc 0.1 sqm each with tar or coal tar black paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for providing 25 mm thick cement concrete (1:2:4) type B-O (using 12.5 mm graded crushed stone aggregate) as in floor etc surface finished even and fair complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layers of cement mortar (1:6) for laying floor finish complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sq. Metre complete all as specified and as directed.

M&L for 10 mm thick plastering in cement mortar (1:4) on brick work or concrete surfaces of wall and finishing the surfaces fair and even complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile n exc 0.36 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cemeent to match complete all as specified and as directed.

M&L for non skid coloured acid resistance tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match complete all as specified and as directed.

Description all as per ser item No. 27.00 here-in-before but as in skirting and dado etc complete all as specified and as directed.

M&L for glazed ceramic coloured/printed tiles in vertical surface of size (450x 300)mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed. 

M&L for brick work with with fly ash bricks, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 10mm thick rendering with cement mortar (1:6) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for prepration of new plastered surfaces of wall and two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 as in lintel upto1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lasing courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones, bed plates, water troughs and like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc., GDE Fe 410-W complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F plates (plain or chequered) Fe 410W (gde-E-250) quality A channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.

S&F powder coated aluminium door shutters, sliding type, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F powder coated aluminium (minium thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. complete all as specified and as directed.

S&F 5.50 mm thick sheet glass(tinted/reflective type) in square each pane complete all as specified and as directed.

S&F 12mm thick prelaminated boards, grade 2 quality, interior grade, decorative type with decortive face veneer on both faces fixed at site as per specification complete all as specified and as directed.

S&F mortice lock, brass 2 levers, vertical type, size 65 mm complete all as specified and as directed.

S&F MS framed work such as grills ,gratings, barred iron doors, ladders, framed guard bars, bird proofing frames etc with confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or self tapping screw complete all as specified and as directed.

M&L for preparation of new steel surface as in ceiling and priming with zinc chrome and further two coats of synthetic enamel paint on surface of any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

S&F Hangers 8 mm dia. G.I. (upto 1500mm length) adjusting level fixed to roof slabs/trusses by means of ceilling cleats/screws made out of G.I. flat (40 x 3)mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cu. m, getting out, in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.

S & F Joist, channel, angle, tee/flat or other sections, including cutting tops to shapes as directed drilling holes ,notching for wire etc and simillar work conforming to of Fe 290 Gde-E-165 etc complete all as specified and as directed.

M & L for prepration of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of zinc chrome primer complete all as specified and as drected.

Fixing only chain link fencing in patch including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provn of binding wire complete all as specified and as directed.

Supply only chain link mild steel PVC coated green colour fencing 4mm dia of wire any size of mesh or type as required at site complete all as specified and as directed.

Supply & fixing 10 mm dia mild steel round bar for line wire of chain link fencing complete all as specified and as directed.

S&F MS bolts, purpose made,with hexognal or square head one end and screwed the other, or screwed both ends, each scewed end to be fitted with 2 washers and one hexonal or square nut exc 10cm but n exc 15cm long and dia of neck n exc 12mm etc complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on fair face of brick work or concrete surfaces and finished even and fair complete all as specified and as directed.

M&L for preparation of new or untreated surface of wall and applying two coats of colour wash (in any colour/design) complete all as specified and as directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out complete all as specified and as directed.

M&L for soling (or sub base) 100mm thick with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M & L plain cement concrete type (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for sub base 100mm thick with moorum/red bajri and rolled to consolidated to required gradient and camber complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:2:4) type B-1, (20mm graded aggregate) complete all as specified and as directed.

M&L for forming construction joint 30 mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

M&L for point wiring with 2.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (1.0mm thick) sunken box with 3mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface all as specified and directed.

M&L for Point Wiring complete with 4.0 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 25 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including 4.0 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal boxes of suitable size , made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover one 3 pin 15 or 16 Amp socket outlet on independent board complete all as specified.

Material & labour for Chemical earthing complete with copper plate electrode 900mm x 600mm x5mm burried directly in ground vetically to a depth not less than 4.70 mtr below normal ground level (with top edge of earth plate not less than 3.60 mtrs below ground level ) connected to copper strip 32 mm x 6 mm as main earthing lead by means of brass brazing at all joints all as directed and connected to earth test point all as specified and testing on completion with and including necessary excavation and earth work in any type of soil ,GI pipe medium grade 50 mm bore for protection of copper strip from earth electrode to earth test point of galvanised Iron / steel , adequate quality of charcoal dust, common salt and magnesium sulphate in alternate layers of 100 mm thick x 6 layers all around the plate and RCC (1:2:4 type B1 using 20 mm graded crushed stone aggregate ) cover of size 54x54x50 mm reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel flushed type handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in drawing. Note :- a). Cost of copper strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items. b) On testing,after completion of job ,if desired earth resistence (less than 1 Ohm ) is not found the earthing shall be redone at no extra cost to govt.

S&F Copper strip (32 x 6)mm buried in ground as main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc. as required 32 x 6 mm copper countinity earth conductor complete all as specified and as directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos., 8 mm dia 25 mm long hex head screw complete all as specified and as directed.

S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket, complete with a single pole MCB 20 Amps complete in sheet metal enclosure complete all as specified and as directed.

M&L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated FRLSH flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified and as directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S & F MCB DP 240 volts, 'B' curve of rating from 40 to 60 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and as directed.

S & F MCB single pole 240 volts, 'B' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and as directed.

Material & Labour for shifting of existing LT Panel including disconnecting incomming and outgoing cable connections and installing, commissioning and testing at new location satisfactorily complete all as specified and as directed.

VINOD TRADING CORPORATION

U P ENTERPRISES

ZAIGHAM ENTERPRISES

S.K.Enterprises

M/S Quality Constructions

Ikrar khan & co.

M/s M Aali construction co

S.M. KAZIM