Repair/Renovation of the Bungalow No. C-3 at IOL Estate, Dehradun

Amount

Surface dressing including bushes and plants in soft loose soil n exc 15 cm deep.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil & refilling of earth as required.

Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concret.M&L

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Demolition of cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for.

Cement concrete type B-2, 1:2:4 (40mm graded aggregate) 100mm Thick.M&L

Cement concrete type B2 1:2:4 in surface channels and drains

Cement concrete type B-2, 1:2:4 (40mm graded aggregate) 50mm Thick finishing cement concrete even and smooth without using extra cement.M&L

Cement concrete type B-2, 1:2:4 (40mm graded aggregate) 50mm Thick.M&L

Demolition Brickwork or stone/boulder masonry buit in cement mortar

Virified Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to match.M&L

Hardcore of broken brick gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Fibre glass 02mm thick reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.S&F

Dismantaling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.S&F

Removing of old/existing tarfelt/treatment from roof surfaces & removing it to ground and cleaning the roof surface with wire brush to receive bitumen primer preparatory to receive water proofing membrane.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete before the all as specified, Make STP/Dr. FIXT/ IWL / SIKA Including prepration and Primer coat on surfaces laying by authorised applicator before laying of membrane & appyling one coat Al. paint over the surface of AAP membrane..

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. S&F

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

Taking down cement plaster including raking out joint , hacking for key , scrubbing down with water etc

Taking up or downs steel tubing and connections, including cleaning for re-fixing or removal to store, Bore of pipe in 40 or 25 mm

Rendering 12mm plaster in 1:4 Cement mortar on fair face of brick work or concrete surface M&L complete. M&L

Brick work with sub class B straight orcurved on plan to any radius in 1:6 Mix M&L Complete

Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litreand UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10 sqmover and including primingcoat of exterior primer applied @ 0.90 litre/10 sqm.Make - Asian, Berger, Nerolac.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).S&F

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

M&L Frosted/plain Sheet glass , ordinary quality and glazing n.exe 0.5 sqm in each pane 4.8mm thick .

M&L Frosted/plain Sheet glass , ordinary quality and glazing exe 0.5 sqm in each pane 4.8mm thick .

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.S&F

Prepairation of new steel surfaces and painting of synthetic enamel two coat with red oxide zinc chrome on steel surfaces with of any description, over 10 cm in width or girth, not otherwise described.Asian, Berger, Nerolac or equivalent

Preparation of old surfaces of wall and apply two coats of distemper oil emulsiontion.M&L .Make: Asian, Berger, Nerolac or equivalent

Screed bed or bedding layer of cement 1:4 mortar 15 mm thick for laying floor finishes.M&L

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, having 110 mm bore. S&F.

PVC (SWR) bends in any radius for pvc pipe having bore 110 mm S&F.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore S&F

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 100mm.M&L

S&F 110 mm bore PVC(SWR) junction single, (Single T ) equal or unequal.

S&F. Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and dixed in position complete in all respect as specified.

Providing and fixing wash basin with C.I. brackets, 32 mm PTMT waste coupling of standard pattren of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.Make: Hindware,Cera,Parryware or equivalent

S&F Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed Make:Jaquar,Kerovit,Hindware or equivalent

S&F EWC single (one piece) vitreous china wash down water closet pan (pedestal pattern) Mdle-3027,complete in all respect. Make- Jaquar/Kerovit/Hindware or equivalent.

vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe).S&F

PVC connectiona 15 mm size with PTMT nuts of length 450 mm. S&F

PVC valveless, syphonic action type flushing cistern, 10 Ltr. Capacity low level, white with inlet, ball valve, float and handle including brackets.S&F

Butt hinges, medium weight, cold rolled mild steel, and fixed. Size 100mm. S&F

Aluminium anodised, barrel tower bolts of ex truded section and fixed→, Size 150mm.S&F

Aluminium handles, cast type, anodised 150mm.S&F

S&F Brass CP angle cock water screwed down for iron pipe and fixed Make:Jaquar/Kerovit/Hindware or equivalent

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms).S&F

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms).S&F

Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardanand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded 30mm thick WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm. In floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Make- Johnson tiles, kajaria, nitco.

Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with joint free

White colour 4 layer Rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part I, Make: Sintex / Vectus /Plasto or equilent S&F.

Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor bore of pipe 15mm

Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor bore of pipe 20mm

Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm and fixed. (Minimum weight15mm-90gms/20mm 125gms).S&F

S&F Brass CP wall mixer three in one for mixing hot & cold water including over head shower, screwed down for iron and fixed Make: Jaquar/Kerovit/Hindware or equivalent

Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed S&F

S&F hand shower tubes 1.5mtr. Long with shower complete as specified, fixed in15 mm dia pipe. Make: Jaquar/Hindware/Kohler

S&F over head shower arm 400mm long complete as specified, fixed in15 mm dia pipe Make: Jaquar/Hindware/Kohler

S&F towel rack 600mm long with lower hanger stainless steel complete as specified. Make: Jaquar/Hindware/Kohler

Toughned glass Frosted 10 mm thick as in hinged doors, partitions automatic doorsand similar work including cutting to shape, drilling holes fixed with Stainless steel bracket as required.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Reinfocement cement concrete Cement concrete type B1 1:2:4 (20mm graded aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.S&F

Granite (of any type) 16 to 20mm work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.M&L

S&F of modular kitchen including all the hinges(all degree), Channels,wire basket(S.S304) grade or cupboard with hinges and profile handles,HDHMR (High Density High Moisture Resistance) Board 16 to 18 mm thick and it should be heat, termite, water resistant, laminated of 01 mm thickness, adhesive for application and nut bolt & screw etc. all accessories complete and also gap is filled with silicon adhesive. Front elevation area will be measured.

M&L for one light point or one fan point concealedwiring with stranded copper cond. PVC sheathed Cables in PVC conduit. controlled by one switch with cables 1.5 sq. mm size. Make- Pipe- Kalinga / Anchor / Plaza or equivalent .Make-Wire-Finolex /Havells /RR or equivalent (Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L cocealed wiring one three pin socket outlet 15 amps. Independent wiring with stranded copper cond. PVC sheathed Cables in PVC conduit with cables 4 sq. mm size. Make- Pipe- Kalinga / Polycab /Plaza or equivalent. Make Wire-Finolex /Havells / RR or equivalent. (Note: The rate include any length of wire required from DB to switch board and light point,Socket point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

Modular Sockets, 6A - 2/3 pin combined 2 module.S&F Make:Anchor/Havells/Legrand or equivalent

Modular switches 1 way 6A,1 module.M&LMake:Anchor/Havells/Legrand or equivalent

Modular Sockets, 6A/16 A - 2/3 pin combined 2 module.S&FMake:Anchor/Havells/Legrand or equivalent

Modular switches 1 way 16A,1 module.M&LMake:Anchor/Havells/Legrande or quivalent

Madular White cover plate with frame, 6 module. S&FMake:Anchor/Havells/Legrand or equivalent

Modular metal Flush Box 6 module S&FMake:Anchor/Havells/Legrand or equivalent

Madular White cover plate with frame, 3 module. S&FMake:Anchor/Havells/Legrand or equivalent

Modular metal Flush Box 3 module S&FMake:Anchor/Havells/Legrand or equivalent

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50Hz, RPM 1200, Copper winding of sweep 300 mm, Make-Bajaj, havells, crompton or equivalent

Supply and fixing round/ squar shape 12 watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,Holders,LED lamp suitable for Roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete Make: Philips/Havells/Wipro or equivalent

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet ,10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make: Havells/Philips/Wipro or equivalent

M&L one three pin socket outlet 5 amps, indepedent with other switches, with stranded copper cond. PVC sheathed cables 1.5 sq. mm size.Make for pipe- Kalinga / Anchor / Plaza or equivalent, Make For wire- -Finolex /Havells /RR or equivalent

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any

Removing of building material etc. to a distance 1.km including loading , unloading and stacking at the destination .

Credit(-) old/unserviceable dismentled steel window frames/grills

M/S P K ASSOCIATES (BID ID -937545)

EARMARK INFRATECH INDIA PVT. LTD. (BID ID -931407)