Supply Installation, Testing and Commissioning of Lighting System

Supply, Installation, Testing and Commissioning of Lighting System

Supply, conveyance, installation, testing and commissioning of Hot dipped Galvanised ( internally and externally) ,Octagonal pole of overall height 7 Mts with single arm breaket of 1.5mts length 48mm dia x 3.25mm thick with standard arm cap. The top dia 70 mm, bottom dia 135mm having sheet thickness 3mm. The pole shall be with base plate of 225x225x16 mm and 4 nos required size of foundation bolt. The pole shall be mounted on suitable size foundation with 6A SP 'c' curve MCB, loop in loop out terminals block, with all required accessories. The cost of the civil foundation is not considered in this item.

Supply, conveyance, installation, testing and commissioning of 120 Watts 15600 lumens LED light fittings suitable for roadway installation with pressure die-cas/ aluminium housing with corrosion resistance powder coating , natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 10 KV,Stress Voltage protection up to 440V 8hrs, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. Make: Philips/Crompton

Supply and installation of External 10 KV lightning & switching surge protection mechanism (class B+C) with copper coated steel rode with enhancing mineral compound earthing

Supply and drawing 3 core 1.5 sq.mm sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in DWC pipe (earth excavation,concrete breaking included) a. 4core 25sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in DWC pipe (earth excavation,concrete breaking included) a. 4core 16sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in DWC pipe (earth excavation, concrete breaking included) a. 4core 10sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE Al. couductor cable of 1.1 KV grade as required

Supply and providing earthing with copper coated steel rod of 1.5 meter long with enhancing mineral compound.

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil). a 3.15 mm GI Wire (10 SWG)

b. 4.00 mm CU conductor (8 SWG) for Feeder pillar earthing

Supplying, laying and jointing of 63mm sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to UG Cable through under existing trench

Supply and fixiing 40mm dia PVC pipe provided in the foundation of street light pole for taking cable in & out from the pole with all required accessories including cutting and making good the walls, colour washing etc. as required as protective covering to cables.

Supply and providing pole foundation of cement concrete 1:2:4, 20 MM metal, form work and 4 numbers of 20 mm dia 500 mm long Galvanized foundation 'J' bolt having 15 cm long standard thread on top end with 16 mm dia matching nuts 3 nos at the top and steel Base plate of size 225*225*16 mm. etc: Seperat pipe shall be provided for incoming and out going cables and shall be finished with smooth with cement mortar 1:4.

Fabrication , supply & Installation of dust and vermin proof wall/ floor mounting thermo plastic meter box of following size suitable for fixing KSEB meter,fuse units,knock for cable entry and exit providing etc for Meter box ,the size is not less than 450*300*170 mm

a. 40 A, 10 kA, 4P MCB (C curve)

b. 40 A, 4 pole, 100 mA RCCB

c. 4 pole 40 A contactor

d.32A,415V HRC type kit kat fuse unit

e. 25A HRC fuse link - 3 nos.

f. 2 way neutral Link

g. 24hr timer - 1 no.

h. 6A SP mCB -

Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

Amount to be deposited with KSEB for availing service connection (actual amount will be reimbursed on production of original documents)

Please Enable Macros to View BoQ information