REPAIRS TO APPROACHES AND SHEDS IN MARKET AREA IN ESTATE AT O.F.CHANDA

Amount

Cat (A) -Items to be supply and fixing

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as per the direction of Engineer-In-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including cutting etc. complete all as per the direction of Engineer-In-Charge

Excavation in trenches in soft / loose soil, not exceeding 1.5 mt. wide and not exceeding 1.50 mt. in depth for foundation & getting out the soil etc. complete all as per the direction of Engineer-In-Charge.

M & L for excavation over areas in soft/loose soil in approaches, getting out the spoil & deposited at a distance not exc. 50 mts. From starting point etc. complete all as per direction of Engineer-In-Charge

M & L for moorum filling in floors & paving, laid in layers not exceeding 15 cm thick in each layer, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. complete all as per direction of Engineer-In-Charge.

M & L for hardcore or broken stone of gauge not exceeding 63mm, deposited, spread, leveled in layers not exceeding 15 cm thick, watered & leveled to a plain surface etc. complete all as per the direction of Engineer-In-Charge

M & L Cement concrete in foundation, Type-B2 1:2:4 (40 mm graded aggregate) for filling and mass concrete as in foundation, compaction, curing etc. complete all as per the direction of Engineer-In-Charge

M & L for Brickwork with fly ash bricks in C. M. 1:6, straight or curved on plan exc. 6m mean radius including scaffoldings, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for cement concrete in posts Type-B2 1:2:4 (40 mm graded aggregate), any thickness, size or shape including pilasters, buttresses, compaction, curing etc. complete all as per direction of Engineer-In-Charge

S & F Glass dividing strips 38mm width, 3 mm thick inserted in position, conform to design etc. complete all as per the direction of Engineer-In-Charge

M & L for P.C.C. in floor 150 mm thick, Type-B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface of concrete smooth with using extra cement including necessary formwork, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

S & F structural steel for Roof trusses (framed), trussed, purlins, rafters, posts, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates etc. including welding/riveting etc. complete all as per direction of Engineer-In-Charge.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (Make-Ispat Industries Ltd./SAIL/TATA/Century Wells Roofing Ind. Ltd/Jindal or approved equivalent only acceptable) as in roof covering/cladding to wall & designed ridge, fixed with self-drilling & tapping hexagonal head screws & bituminous felt & neoprene/EPDM washer etc. using all necessary safety appliances etc. complete all as per the direction of Engineer-In-Charge

Rendering plaster 15 mm thick on fair face of concrete /Brick surfaces in C.M. 1:4 including finishing the surface even and smooth without using extra cement, using necessary scaffolding, curing etc. complete all as per direction of Engineer-In-Charge

M & L for P.C.C. in sub-floor 100 mm thick for road, Type-B2, 1:2:4 mix (using 40 mm graded aggregate) with finishing the surface of concrete even including necessary formwork, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L Sand/crushed stone dust filling in under floors or filling below paver blocks including watering and consolidating to required gradient and camber, watering etc. complete all as per the direction of Engineer-In-Charge.

S & F Super glaze series 60mm thick interlocking cement concrete coloured rubber moulded paver blocks, compressive strength M-35 grade with gray cement and pigment, etc. complete all as per the direction of Engineer-In-Charge.

M & L Synthetic enamel painting on ironwork - 2 coats over one coat of red primer including all preparatory works , Make- Asian / Berger / Nerolac / Shalimar of approved equivalent paints of 1st quality shall only be used in the work etc. complete all as per the direction of Engineer-In-Charge

M & L Cement painting on walls of new surfaces – 2 coats over one coat of primer, Make- Snowcem (Cemcolour) / Asian (Gutucem) / Berger (Duracem) / Shalimar (Mahcem) paints or approved equivalent only acceptable including all preparatory works, curing wall surfaces etc. complete all as per direction of Engineer-In- Charge

Returning, refilling excavated Soil in trenches, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick etc. complete all as per direction of Engineer-In-Charge.

Removing excavated soil materials upto 50 mts. from starting point and depositing where directed, spread, levelled etc. complete all as per the direction of Engineer-In-Charge.

Cat (B) - Buy Back Items

Schedule of credit to Contractor for Item No. 01

Schedule of credit to Contractor for Item No. 02

HARIOM ENTERPRISES

H.I BOHRA

G P ENTERPRISES