WB/37/APAS-20/BDOKNT/25-26/20

Cement Concrete with 30mm down graded Shingles excluding shuttering. (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety (a) 1:3:6 proportion L.S. (Details in bill)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. In Ground Floor River Bazree (Details in bill)

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in Ground floor. L.S. (Details in bill)

Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. At 1st floor.(The quantum should be corrected upto three decimals) Sal : Siliguri

Z-batten shutter of door and window as per design having tongued and groove half lap joint as per direction of the E-I-C including fitting and fixing shutter in position,but excluding the cost of hinges and other fittings in 1st floor. B) Shutter with 19 mm thick planks 19 mm thick battens. Sisu, Gamar, Champ, Badam, Bhola, Morga, HallakL.S. (Details in bill)

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor). b) With 4:1 cement mortar i) 10 mm. thick plaster - Lum Sum ( Details in bill )

Artificial stone in floor,dado, staircase etc. with cement conctrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement. In 1st floor. 20 mm. ThickL.S. (Details in bill)

Anodise aluminium Aldrop/Sliding bolts of approved quality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete. 250 mm x 16 mm dia. Bolt

(a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in 1st floor. Grill weighing above 10 kg./sq.m.and upto 16 kg / sq.m.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification: i) In Ground floor : b) Two coats - Lum Sum ( Details in bill )

Priming one coat on timber or plastered surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary. (a) On timber or plastered surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) ) Lum sum ( Details in bill )

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary. (b) On steel or other metal surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) - Lum sum ( Details in bill )

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] (Details in MB)

Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher)

Add:- GST @ 18%

Add:- Labour Welfare Cess @ 1%