Provision of Resurfacing of Roads at DGAero Campus at Bengaluru

Providing and applying distempring one or more coats on old work 1st quality acrylic distemper (ready mixed) having VOC (Volatile organic Compound) content less than 50 gram/liter, of approved brand and manufacture including preparation of surfaces, making up plaster cracks etc to achieve even shade and colour complete at all heights and directed by Engineer in Charge.

Removing dry or oil bound distemper water proofing cement paint and the like by scrapping sand preparing and preparing the surface smooth on old work (one or more coats) including necessary repairs to scratches etc, complete

Repairing of Cracks : Surface preparation removing the loose portion by scrapping for removing any laitance and cleaning the surface with water/Air Blower/Wire Brush as per the surface condition.

Cracks Cutting: The Existing Walls Cracks shall be cut opened in ‘V’ Shape with Mechanical groove cutting machine with required joint for application.

Joint Cleaning : Prepared joints shall be cleaned by Mechanical Means/Wire Brush or any other method like Air Blower for removing the dust or any contaminated material in the joint which may affect the bounding of the PU Sealant.

Sealant Application : Application of Nitoseal PU40/PU 50 Single component PU Sealant or equivalent sealant in the prepared joint to accommodate Movement in the walls including provision of necessary scaffolding, safety equipment etc complete all as per Engr-in-charge.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and applying Finishing walls with Acrylic smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 Ltr/10 Sqm) on existing surface with apex ultima or equivalent paint of approved brand and shade to match existing shade on external surface of wall including preparation of surface, scrapping of loose surface if any at all heights all as specified and directed by Engineer -in Charge.

Painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on steel/wooden surfaces.

Painting road surface making one or more coats on old works ---- as per sheet enclosed.

French spirit polishing one or more coats on old work including preparation of surfaces etc complete.