REPAIRS RENEWAL OF LT DISTRIBUTION PANELS AND EARTHING OF MD AND OTM ACCN OF 29 FAD ASHOK NAGAR AND COD UNDER GE DEHU ROAD

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation etc or for taking out or for laying cables, pipes etc and getting out all as specified and directed :-

(a) Soft / loose soil

(b) Hard / dense soil

Do all as per item No 1 above but exc.1.5m and n. exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed by Engineer -in-Charge.

Taking out LT Cable of any size and type Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Relaying of LT Cable of any size obtained from item no 5 as per site requirment and making connections as specified and directed by Eng in charge. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

supply & Laying cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster

185 sqmm X 3.5 core

120 sqmm X 3.5 core

95 sqmm X 3.5 core

70 Sq mm x 3.5 core

50 Sq mm x 3.5 core

35 Sq mm x 3.5 core

25 Sqmm x 4 Core

16 Sqmm x 4 Core

10 Sqmm x 4 Core

16 Sqmm x 2 Core

10 Sqmm x 2 Core

Taking out HDPE DWC Pipe of any size Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Relaying of HDPE DWC pipe of any size obtained from item no 8 as per site requirment as specified and directed by Eng in charge. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

50 mm dia

80 mm dia

M& L in repair GI tubing 50 mm dia light grade for cable protection

Restringing OH line of ACSR conductors of any description which includes replacement 22 SWG aluminium binding wire,removing jumper connections, reconnection of binding wire & jumper connections after restringing complete upto the satisfaction of Engr-in-Charge. NOTE :- Each conductor shall be measured & paid.

S&F in repairs ACSR conductor and strengthening on insulators including aluminium binding wire including reconnecting service connections any type which has been disconnected while dismantling old conductor complete all as specified and directed including dismantling of U/S conductor any type any size.

S&F in repair LT insulator, PIN type 1100 volts as per IS 1445, grade of size 100mm height, 65mm dia, porcelain, vitreous, white or brown including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut including taking down existing unserviceable insulator all as directed. Make;- Elpro or equivalent.

Fixing only in repair LT insulator, PIN type, including providing nut bolts etc complete all as directed by Engr-in-charge.

S&F in repair shackle type insulator as per IS 1445 working pressure in 1100 volts, 100mm height, 115mm dia porcelain, vitreous, white or brown insulator including galvanised mild steel straps of size 31x5mm, washers, insulator bolts of size 14mm dia, washers and nuts, including taking down of u/s shackle insulators complete all as directed by Engr-in-charge.

Fixing only in repair shackle type insulator including providing nut bolts etc complete all as directed by Engr-in-charge.

Dismantling and taking down MS cross arms, bracing supports, clamps, back plates, hooks etc from dismantled/existing LT poles of any type or description complete all as specified and directed.

Fixing only MS cross arms, bracing supports, clamps, back plates, hooks etc complete all as specified and directed.

M&L for cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section (MS channel, angle sections, flat, round or square bars ) for reqd sizes and shape including bolts nuts & washers welding bending cutting cold or hot drilling holes for inserting in any shape or size as indicated or directed complete incl painting ( one red oxide primer coat two coats of aluminium paint ) complete.

S & F in repairs Cradles hexagonal or rectangular fabricated with galvanised steel wires 4 mm or 3.15 mm dia for road crossings, HT and LT conductors etc., including dismantling existing U/S cradles all as directed.

S&F in repairs synthetic / PVC line separators of LT OH lines with nut,bolts & washers straight type horizontal configuration fixed at a point as directed and suitable for single phase 2 wire LT lines

S&F in repairs synthetic / PVC line separators of LT OH lines with nut,bolts & washers straight type horizontal configuration fixed at a point as directed and suitable for three phase 4 wire LT lines

M&L for preparing old painted steel surfaces by scrubbing with wire brush and applying two coats of aluminium paint to 9 mtr long LT steel tubular poles complete with connected fittings such as brackets, cross arms, metal portion etc and stick computer cut sticker radium number on the pole with of suitable high letters on 10 cm x 10 cm square block with black enamelled paint complete all as directed by Engineer-in-Charge

Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 31 , 09 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

Demolition of PCC coping , base , etc any type

M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

S&F in repair GI Wire 4 mm dia fixed on LT/HT Poles

M & L in repairs for earthing with galvanised steel earth plate electrode 60cmx60cmx6.3mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5m below ground level connected to and including GI strip of size 25 x 4 mm as earthing lead welded with earth electrode (excluding GI protection pipe) and connecting to equipments by means of earthing lead connecting to equipments by means of GI bolts & nuts etc. with provision of char-coal and salt etc. all as per electrical plate No. 3 of SSR Part I, 2009 including RCC cover and MS angle iron frame watering arrangement with GI pipe 20mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc complete all as specified and directed by Engr-in-Charge. Note: Rate quoted deemed to be including excavation by compressor M/C if Soft disintegrated rock met with,to required depth.

Supply and fix earth strip of size 25 x 3 mm galvanised iron strip fixed to wall/over head reservoir on batten or recess or chases or buried inground or drawn in conduit /pipe fixed on poles insulated as per Engr-in-Charge.

M&L for painting with two coats of aluminium paint both side surfaces of chain link fencing complete with angles, brackets, Gate of any type and all metal portion complete all as directed by Engr-in-Charge. Note:- Painting constant as per SSR Part II shall be applicable for measurement.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including providing HDPE pipe of required size all as specified and directed by Eng in Charge. Note:- Item rate include necessary excavation on both sides of road.

Cutting & trimming of tree trunks/ branches having grith not more than 50 mm, falling on or likely to fall on LT over head electrical line for clearence of 3.0 meter on either side of the nearest conductor and disposal of unservicable materials to distance not exc.50 mtrs .& clearing of site all as directed by Engr -in-Charge. Note:- The distance between two poles is measured as one span.

Supply & fix in repair MCCB 630 Amp, 4 pole, 415 V,with breaking capacity 50 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 400 Amp, 4 pole, 415 V,with breaking capacity 36 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 350 Amp, 4 pole, 415 V,with breaking capacity 36 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 200 Amp, 4 pole, 415 V,with breaking capacity 36 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 160 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 125 Amp, 4pole, 415 V,with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 100 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Supply & fix in repair MCCB 63 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider/Standard

Material & labour for cable route indicator made out of Aluminium plate 80mm dia, 6 mm thick & fixed over M.S angle iron of size 30 x 30 x 6 mm, 45 cm in length duly painted with Synthetic enamel BLUE paint suitable for LT cable all as specified & including embedded in PCC (1:3:6) type C1 of size 30 x 30 x 20 cm in ground complete all as specified.

M & L for Danger Notice plate made of 1.6 mm thick mild steel sheet vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour, Write 'LT SUPPLY 440 Volts 'and fixed with MS clamps bolts and nuts of approved size for LT 20x15 cms Complete

Supply& fix in repair solar LED standalone street light consists of 12 v,24 watt,2400 Lumen LED light with in built SCC ,SPV Panel of 125 watt power,60 Ah Battery(LMLA),5 meter HDG Tabular pole of size 50 mm dia above ground . MAKE:-CAT PART No 24 W Solar SLS of Havells/Philips/Wipro

S&F GI Ladder type cable tray of width100-300 mm,height 40-75 mm having Pre Galvanised finishing with including fittings like bends,tees to fix on walls or roofs or surfaces etc.

S&F GI Perforated cable tray of width100-300 mm,height 40-75 mm having Pre Galvanised finishing with including fittings like bends,tees to fix on walls or roofs or surfaces etc.

M& L for Cable twin core aluminium conductor,stranded , PVC insulated and PVC sheathed 6 sqmm multistranded for service connection.

Taking out of old Panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 300 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 160 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA - 03Nos. (b) MCCB 40 amps 4 pole 16 KA - 01 Nos

Taking out of old panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 300 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 160 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&T /Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA - 4 Nos.

Supply & fix cable jointing kit for 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge. Make :- M-Seal/ Densons/ Dowells

10 to 16 sqmm,3.5/4 core

25 to 50 sqmm,3.5/4 core

70 to 95 sqmm,3.5/4 core

120 to 185 sqmm,3.5/4 core

S & F in repair Advanced Multi functional meter 4420 series LCD meter C1 with RS481 . MAKE :- CAT No WC442011OOOO of L&T /Seimens/Schiender

Taking out of old panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 300 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 160 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&T /Seimens/schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 40 amps 4 pole 16 KA - 5 No

M & L to find out fault location in 11000 V /415 V UG Cable of any size by using cable fault locator directed by all as specified and directed by Eng in charge. Note:-Contractor must bring cable fault locator at site within 24 hours of intimation otherwise recovery @ Rs 1000/Hr will be charged after 24 hours.

Supply & fix in repair switch disconnector fuse with encloser to be fixed on wall( suitable for din fuses) 3 pole & neutral with HRC fuse 320/315 Amps capacity, 415 V,Make : FS315A-TPNFDIN of HPL /Indo asian/standard/Havells or equivalent

Supply & fix in repair switch disconnector fuse with encloser to be fixed on wall ( suitable for din fuses) 3 pole & neutral with HRC fuse 200Amps capacity, 415 V,Make : FS200-TPNFDIN of HPL /Indo asian/standard/Havells or equivalent

Supply & fix in repair switch disconnector fuse with encloser to be fixed on wall( suitable for din fuses) 3 pole & neutral with HRC fuse 160Amps capacity, 415 V,Make : FS160A-TPNFDIN of HPL / Indo asian/standard/Havells or equivalent

Supply & fix in repair switch disconnector fuse with encloser to be fixed on wall( suitable for din fuses) 3 pole & neutral with HRC fuse 100Amps capacity, 415 V,Make : FS100A-TPNFDIN of HPL / Indo asian/standard/Havells or equivalent

Supply & fix in repair switch disconnector fuse ( suitable for din fuses) 3 pole & neutral with HRC fuse 63 Amps capacity, 415 V,Make : FS063A-TPNFDIN of HPL /Indo asian/standard/Havells or equivalent

M&L for repair of LT distrobution panel that includes welding to panel doors,reconnection of defective electrical connections(incoming and outgoing cables),cleaning of inner and outer surfaces,painting of inner and outer surfaces,reconnection of cables coming from transformers ,Replacement of defective voltmeters&ammeters ,Providing of Cable glands, spraying of Pesticides to remove gross, and cleaning & well surfacing of Transformer sorroundings all as specified and directed by Eng in Charge.

S&F in repair On load change over switch 415V,4 pole with current capacity 400 amp. MAKE:- C04004PEAV ofHPL/Standard/Havellsor Equivalent.

S&F in repair On load change over switch 415V,4 pole with current capacity 200 amp. MAKE:-C02004PEAV of HPL/Standard/Havellsor Equivalent.

S&F in repair On load change over switch 415V,4 pole with current capacity 160 amp. MAKE:- C01604PEAV of HPL/Standard/Havellsor Equivalent.

S&F in repair On load change over switch 415V,4 pole with current capacity 100 amp. MAKE:- CDC01004PEAVHPL/Standard/Havellsor Equivalent.

S&F inrepair On load change over switch 415V,4 pole with current capacity 63 amp. MAKE:- CDCO0634PEAV of HPL/Standard/Havellsor Equivalent.

Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral copper bus bar of 400 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items(BDE HQ) Incoming:- (b) MCCB 250 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 100 amps 4 pole 16 KA - 03Nos. (b) MCCB 63 amps 4 pole 16 KA - 01Nos.

M/S kirpan Enterprises

PURVA ELECTRICALS AND ENGINEERS

Shri Sai Electricals

Om Sai Enterprises

M/S. Niksun Electro-Infra Private Limited

PREETI ENTERPRISES

SKS Electricals

SHREE VAIBHAV ELECTRICALS