C/O Multi storey parking(1ST AND 2ND floor)

Amount

Providing form work with steel plates of 3.15mm thick, welded with angle iron in frames of 30mmx30mmx5mm,so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc.

Providing form work with steel plates of 3.15mm thick, welded with angle iron in frames of 30x30x5mm,so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths.

Providing form work with steel plates of 3.15mm thick, welded with angle iron in frames of 30x30x5mm,so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain.

Providing form work with steel plates of 3.15mm thick, welded with angle iron in frames of 30x30x5mm,so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing,.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto all heights of propping and centring below supporting floors and removal of the same for in-situ-reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls in all width.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate20 mm nominal size).

Steel reinforcement for reinforced cement concrete work including strengthening, cutting, bending, binding and placing in position complete and binding all complete avobe plinth level TMT bar grade Fe-500

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :CM 1:5

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.with CM 1:4

Providing and fixing M.S. channels for doors, windows, frames manufactured from M.S. section 40mmx75mmx4mm with M.S. flat 75mmx4mm in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold i/c thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete asn per the direction of Engineer-In-charge.

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.Decorative finish (both side wood

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints, vented and welded with 16mmx3.15mm lugs 10cm long embedded in cement concrete block 15cmx10cmx10cm (fifteen centimeter into ten centimeter into ten centimeter) size of 1:3:6 20mm nominal size or with wooden and screws of rawl plugs and screws or with fixing clips or with belts and nuts as required and iron fittings including providing and fixing of glass pans with glazing clips and special metal sesh butt of approved make complete including applying a priming coat of red lead paint

Fixed steel Windows

Top Hund Window 20 % of Total Qty

Providing and fixing factory made double steel shutter side hungs ( one glazed and one wire gauge)of standred rolled steel sections, jointing mitered welded with manufactured to relevant ISI standred specification with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting i/c providing and fixing glass pans with special putty of glazed side of shutter and wire gauge of IS desgination 85G with metal beading on other side complete i/c priming coat of red lead paint..

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour orshade, with necessary screws etc. Complete

Providing and fixing oxidised M.S. casement stays(straight peg type) with necessary screws etc. complete.

Providing and fixing ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etc. complete :100 mm

Chequired terrazo tile 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

15 mm cement plaster in single coat on rough/ Fair side of brick/ stone masonry for interior plaserting upto floor two level with Cm 1:6

6 mm cement plaster to ceiling with Cm 1:3

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempering with oil bound washable distemper ofapproved brand and manufacture to give aneven shade:New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Prividing and fixing railing for stair case having baluster of 40x40mm square hollow MS pipe SWG-16 gauge with a clear height of 85 cm @ 60 cm center to center jointing in cement concrete step and jointing with electric / gas welding at top along with hand rail of hollow MS pipe of 50 mm dia(SWG-18) vertical baluste welding/ jointed with each other with 2 Nos MS flat of 50x5 mm complete with applying priniming coat of red lead paint as per specification and direction of Engineer in charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete

Providing and fixing 100mm dia CP iron grating of ESS-KSS for nalhni trap

Providing and fixing 600x450 mm beveled edge mirior supperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete.

Providing and fixing chromium plated brass soap dish of Jaguwar or contra with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing 15mm diameters C.P. brass bib tap of Jaguwar or contra with capstan head

Providing and fixing brass stop cock of approved quality 15mm

Providing and fixing uplasticised PVC connection pipe with brass unions 450 mm length 15mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.1216 ( 16mm OD Pipe) Concealed work, including cutting chases and aking good the wall etc.

Providing and fixing G.I. pipes complete with G.I. Fittings including trenching and refilling etc. :20 mm

Providing and fixing G.I. pipes complete with G.I. Fittings including trenching and refilling etc. :15 mm

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked i/c fixing with approved adhesive etc. Cpmplete.

75 mm Dia

110 mm Dia

Providing and fixing PVC Single Equal Branch with oval asses ISI Marked insertion rubber washer 3 mm thicK bolt and nuts complete i/c fixing with approved adhesive etc. Cpmplete.

75 mm Dia

110 mm Dia

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. Complete.

vikas parmar

Hem Raj