PROVN OF 08 X HIGH MAST LIGHT IN EME SCHOOL VADODARA UNDER GE (ARMY) VADODARA

Amount

Supply and Installation of 16 mtr High galvanized mast light conforming to IS-875(Part III), 1987, made out of steel plates conforming to BS -EM 10025 cut and folded to form a tapered polygonal section in two section having 20 sides, plate thickness of base section 4 mm & of top section 3mm, length of base and top section as 8.25mm and dia of base section 360mm and top section 150mm in two sections suitable for wind speed of 180km/hr with double drum winch and stainless steel rope of grade AISI 304,7/19 construction, 6mm dia, trailing cable copper conductor 5 core, 2.5sqmm EPR/PCP insulated, PCP sheet including power tools of 0.75 HP capacity(motorized system for bringing up & downs the lights), lightesing arrestor spike etc suitable for 6 to 9 LED Flood Light of 170 Watt symmetrically fitted and aviation light along with their control gear and having two point suspension system with luminaire mounting arm, pully assembly, including RCC foundation as per height and Excavation and earth work in any type of soil,foundation bolt etc complete all as per manufacturers instruction/ design . Errection of Mast shall be carried out under the supervision of Manufacturer with the help of suitable equipments or with the help of modern Engineering practices all as specified and directed by Engg in Charge. Note :- Aviation light light flood light and Feeder pillar box shall be measured and paid seperately.

S&F High Mast LED Luminaires of 170 Watt 230 V AC outdoor type with thermal management in multiple optics,with impact and corrosion resistant complete with driver and lamp. Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose.,

Supplying and fix of Energy Efficient Low Intensity 6 Watt LED avition obstruction light Lumainair Cat Ref No. HAVL 01 S 230 or other equvalent model of make as speicified in list of make.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 Core

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying cables/pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting ou

Returning filling in trenches excavated soil including spreading levelling watering and well ramming in layers n.exc 25 cm.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.

M & L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise all as directed

Supply anf fix Sheet metal Triple pole and earth encolsure with a three pin and earth plug with socket complete with one Four pole MCB 32 Amps Capacity all as specified and directed by Engg in Charge.

Supplying and fixing double door MS feeder pillar box near the high mast tower with following component (switching acc.) inside the feeder pillar including internal wiring all Complete for automatic , timely OFF/ON for operating of (6 ) LED lighgting fitting. i) 63 A 4 pole MCB - 1 no. ii) 240 V contractor - 1 no. iii) Day dial timer (GIC) - 1 no iv) By pass switch - 1 no v) Outlet Terminal - 2 nos. vi) Starter for motor operation (Forward and Revers direction ) - 1no

BK CONSTRUCTION

Chanda Construction Co.

kay pee construction