Construction of Bi-Cycle Stand in Jiri Womens Hostel at Tezpur University Campus

Amount

Earth work in surface wxcavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and sisposal of excavated earth upto 50 m and lift upto 1.5m , as directed by Engineer in Charge. All kinds of Soil

Excavating, Supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watring of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundations etc. complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consoliadating and dressing complete.

1:3:6 (1 Cement:3coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources)

1:2:4 (1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggtegate (RCA) upto 25%)

1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources.

Centering and Shuttering including strutting, propping etc and removal of form work for: Foundations,footings,bases for columns

Centering and Shuttering including strutting, propping etc and removal of form work for: Columns, piers,abutments,pillars,posts and struts

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement :4 coarse sand)

Steek reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild Steel and Medium Tensile steel bars.

Steel work in built up tubular (round,square or rectangle hollow tubes etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including weldings and bolted with special shaped washers etc complete. Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corroson resistance. The profile shets shall be fixed to truss members in slope or required plinth or curvature with Hex can headed self drilling / tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour,scaffolding,T&P and sundries etc complete as per directions of the Engineer in Charge (Cost of truss / frame work shall be paid separately) 0.56 mm, Aluminium color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm,cover width 1000mm.

Providing and fixing of Pre Coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness, Alloy 31500 (IS designation) (Aluminium Alloy (AA) 3004 (ISO designation) For color,coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS Screws of size 6 X 50 mm with 3 mm thick EPDM Seal and SS Plain washer complete: Pre-coated / mill finish aluminium Ridges palin (500-600mm)

S B ENTERPRISES

Swastika Teleservices

ABHIJIT DAS