INCREASE IN HEIGHT OF COMPOUND WALL AT SOUTH EAST SIDE OF 6.78 ACRES CGRA LAND AT RAMESWARAM, KOCHI

Amount

Demolition of brick work or PCC block masonry, built in cement mortar including all quoins, pillars etc and removal from site complete all as directed.

Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:4 all as specified and as directed.

All as per Item No. 2 above but except PCC blocks built in cement mortar 1:4 all as specified and as directed.

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15 mm thick rendering on brick/concrete wall surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Supply only integral water proofing compound all as specified and as directed.

Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Material and Labour for complete removal of existing surface finish on wall, preparation of plastered surfaces by washing down with water, removing fungus growth if any, filling the crack and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer including necessary scaffolding complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Supply and Fix in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

Supply and Fixing Mild steel work such as joist, channel, angle or tee section fixing independently without connecting plates, cut to ordinary length ie, within 20mm of the length indicated conforming to Grade E-250, Fe 410 W quality A all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and Fix concertina coil of 610 mm outer dia made out of 2.60mm dia spring steel wire 230gm (2min) dipped with corrosion preventive fluid (rusilo 901) of castrol make incl white colour, each coil having min 50 turns (circles) and an average weight not less than 8.57 kg (plus or minus 5%) including handle and spike at both ends of coil errected in position on top of mild steel angle by fixing with MS rod for securing incl necessary welding to MS sections etc complete all as specified and directed. NOTE: (i) Mild steel angle/other sections shall be measured and paid separately. (ii) The method of measurement shall be as per PS clause No.16.1.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in beams and similar work complete all as specified and as directed.

Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour providing plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in mud stops, and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered or chamfered angles and throating as directed including use of form work as necessary complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 21,410.00 NOTE: Bidder shall insert credit amount of Rs. 21,410.00 as rate in Green field under Col-13.

AB CONSTRUCTIONS

Anaswara Constructions

Chittoor Engineering Industries

K R JOSEPH AND SONS