E tender for the Furnishing work at Trivandrum

E tender for the Furnishing work at Trivandrum For more details refer tender documents

Team head Table Main Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.60mm width & 30cm height modular partition with pinup & write up above the table top.(W/O KB/CPU) Size:180 (L)x80(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . Size:90 (L)x45(W)x75(H)

Team Chair (Model - Exotic-01) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair (Model - Fieasta F) Medium back Chair -Cushioned seat ,Meshback , PP arms ,and Sledge base.

Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire entry.etc Size: 100(L)x55(W)x75(H)

CPU Trolly Suppling and insalling CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to esae out the wire accessibility from the CPU

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

8 Mini Conference/Discussion table Legs are made of 50x50 square steel tube & connectors are of 50x25 rectangular steel tube of 16 swg. Metalic race ways below table top for wire mangement, 18mm thick prelaminated particle board leg modesty. 25mm thick prelaminated particle board table top confirming IS 12823 with 2mm PVC edge band, 2 tone additional lipping table top, Knock down fitting, popup unit, level adjusters with side,top unit. Size: 180(L)x60(W)x75(H)

Conference Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Storage Made of 18mm thick prelaminated board confirming IS 12843, PVC edge banded, knock down fitting ,horizontal pannels at a distance of 45cms, vertical support to be provided at an intrevel of 80/90cms. Hardware like handle, lock and key, minifix, powder coated chip board screws, PVC right angle block, SS shelves support, level adjusters etc. Size: 570(L)x45(W)x240(H)

Window BlindRoller type blinds,pvc chain mechanisum, inside and out side mount,light filtering polyester cloth etc

Ground Floor Reception Table Fully made of 18mm thick prelaminated particle board. Main table top @ 75cm Ht and 2nd table top @ 105(H)cms. Desingner modesty panel, gromet for wire management, level adjusters etc. Size:240(L)x60(W)x105(H)

Reception Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

3 Seater Sofa Made of hard wood frame and cushioned with 32 density PU form, upholstery with good quality art leather

TEAPOY Under structure made of steel tube and table top made 12mm thick glass.

Corner Table

Workstation Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire entry.etc Size: 100(L)x55(W)x75+30(H)

CPU Trolly Suppling and insalling CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to esae out the wire accessibility from the CPU

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

Workstion Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Window Blind Roller type blinds,pvc chain mechanisum, inside and out side mount,light filtering polyester cloth etc.

First Floor Manager Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.(W/O KB/CPU) 210(L)x80(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . 100(L)x45(W)x75(H)Back Unit Back Unit -BACKUNIT-Made of 18mm prelam board, PVC edge banded, sliding/ hinge doors, kwock down fitting, horizontal pannels at a distance of 45cms, vertical support to be provided at an intervel of 80/90cms. Hardware like handle , lock and key, minifix, powder coated chip board screws, PVC right angle block, ss sheves support, level adjusters etc. 240(L)x45(W)x75(H)

Manager Chair -(Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair - (Model - Fieast F) Medium back Chair -Cushioned seat ,Meshback , PP arms ,and Sledge base.

Conference Table Legs are made of 50x50 square steel tube & connectors are of 50x25 rectangular steel tube of 16 swg. Metalic race ways below table top for wire mangement, 18mm thick prelaminated particle board leg modesty. 25mm thick prelaminated particle board table top confirming IS 12823 with 2mm PVC edge band, 2 tone additional lipping table top, Knock down fitting,3nos popup unit, level adjusters etc. 450(L)x180(W)x75(H)

Conference Head Chair (Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support.

Conference Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

PA Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.(W/O KB/CPU) 120(L)x60(W)x75(H)

PA Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Visitor Chair - (Model - Fieasta F) Medium back Chair -Cushioned seat ,Meshback , PP arms ,and Sledge base.

Workstation - (Linear) Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire entry.etc 100(L)x55(W)x75+30(H)

Workstation Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Window BlindRoller type blinds,pvc chain mechanisum, inside and out side mount,light filtering polyester cloth etc.

Workstation Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire entry.etc 100(L)x55(W)x75+30(H)

CPU Trolly Suppling and insalling CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to esae out the wire accessibility from the CPU

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

Workstation Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Team Leader Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.60mm wiidth & 30cm height modular partition with pinup & write up above the table top.(W/O KB/CPU) 180(L)x70(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . 90(L)x55(W)x75(H)

Officers Chair - (Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair - (Model - Fieasta F)Medium back Chair -Cushioned seat ,Meshback , PP arms ,and Sledge base.

Window Blind Roller type blinds,pvc chain mechanisum, inside and out side mount,light filtering polyester cloth etc.

Workstation Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire entry.etc 100(L)x55(W)x75+30(H)

CPU Trolly Suppling and insalling CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to esae out the wire accessibility from the CPU

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

Workstation Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Team Leader Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters

Officers Chair - (Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair - (Model - Fieasta F) Medium back Chair -Cushioned seat ,Meshback , PP arms ,and Sledge base.

Window Blind Roller type blinds,pvc chain mechanisum, inside and out side mount,light filtering polyester cloth etc.

Table for Recreation Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 25mm thick prelaminated particle board table top confirming IS12823 with 2mm pvc edgebanded. 120(L)x90(W)x75(H)

Chair for Recreation Injuction moulded polypropelene moulded shell chair

Pantry Table Fully made with 18mm thick BWP plywood laminated with 1mm thick mica & .8mm thick balancing mica under structure made 50 x 50 micron epoxy polyester powder coating.

Pantry Chair Injuction moulded polypropelene moulded shell chair.

Transportation