PERIODICAL SERVICES TO OFFRS RESIDENTIAL AREA OFFRS INSTITUTE SINGLE OFFR INLIVING CB QUARTERS AND ETTIKULAM AREA AT INA EZHIMALA

Amount

Notes:- (a) The work of periodical services shall be carried out as up to G+2 building. Necessary steel scaffolding shall be provided by the contractor. All safety measures shall be strictly adhered. (b) Contractor shall also ensure medical/life insurance cover for the labour party and the copy of the same shall be submitted by the contractor to the GE through EIC. (c) The contractor shall submit the guarantee of 5 years life for item Nos 17 & 18 ( Two or more coats of Premium acrylic emulsion paint on exterior surfaces) (d) The work item Nos 17 & 18 ( Two or more coats of of Premium acrylic emulsion paint on exterior surfaces) shall be applied by mechanical sprayer through authorized company applicator of approved shade. (e) Contractor should procure entire qty required for item No's 4, 5, 17 & 18 (Premium acrylic emulsion paint on exterior surfaces, weather coat paint) as per CA qty at a time or in various consignemnts as per requirement (with minimum requirement of three months) and material shall be stored in covered godown /store room in such a manner as to prevent deterioration or any damage. The storage, accounting and preservation of material procured by the contractor shall be done as per standard engineering practice till the same is incorporated in the work and the cost of the same shall be deemed to be included in the unit rate/amount quoted by the tenderer. (f) Material store room shall be provided with two locks on each door. The key of one lock at each door shall remain with the Engineer-in-charge or his representative and that of the other lock with the contractor‟s authorised agent at site of works so that material is removed from the godown only according to daily requirement with the knowledge of both the parties. (g) The contractor shall submit original purchase vouchers for the total quantity of material to be incorporated in the work.

M&L for preparation of old treated surfaces and appling one coat of acrylic emulsion paint (interior grade) on walls complete all as specified and as per manufacture's instructions.

All as per item No 2 above but two coats of interior emulsion paint complete all as specified and as directed.

M&L for preparation of old painted wall surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior emulsion paint weather coat smooth (Berger make or equivalent in other makes) over a coat of primer with sealant properties using seal - o - prime or weather coat exterior primer (of Berger make or equivalent other make ) using rollers made from foam or synthetic fibres to get a smooth and tint free surfaces complete all as specified and as directed.

All as per item No 4 above but two coats of exterior emulsion paint weather coat smooth (Berger make or equivalent in other makes) over a coat of primer with sealant properties using seal - o - prime or weather coat exterior primer (of Berger make or equivalent other make ) using rollers made from foam or synthetic fibres to get a smooth and tint free surfaces complete all as specified and as directed.

M&L for preparation of wall surfaces by scrubbing using nylon /jute/wire brushes scrapper blades and applying wall care putty interior or exterior and finshing the surface even and smooth complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of oil bound distemper on ceiling all as specified and as per manufacturers instructions.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed.

M&L for preperation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces including rafter, purlines (upto 9 mtr height) and sign board post etc complete all as specified and as directed.

M&L for preparation of old treated concrete,stone plastered wall surfaces etc and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No.11 above but two coats of synthetic enamel paint complete all as specified and as directed.

M&L for rendering 10 mm thick CM 1:4 using liquid WPC over 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement (in patches) complete all as specified and as directed by EIC. Note:- WPC shall be measured and paid under seperate item.

M&L for treating holes, cracks etc. up to 5 mm making V groove using patti blades and filling the cracks with ready to use crack fillers and allowed to dry complete all as specified and as directed.

M&L for treating holes cracks etc more than 5 mm up to 10 mm by making V groove using patti blades and filling the cracks with cement and sand aggregate mixture developed with polymer modified mortar (PMM) with suitable polymer like home shield crack fill paste home shield advance latex plus and home shield cement mix plus (berger make or equivalent) and allowed to dry complete all as specified and as directed.

M&L for treating holes, cracks etc. more than 10 mm and up to 40 mm and filling the cracks by using flexible 2 pack poly sulphide sealants like Berger home shield joint seal GG / PG (Berger make or equivalent ) and allowed to dry complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old painted surfaces including complete removal of existing treatment and cleaning the surfaces to receive new treatment complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and as directed.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed.

M&L for preparation of old treated surfaces and appling one coat of sandex paint on walls using rollers made from foam or synthetic fibres to get a smooth and tint free surfaces complete all as specified and as per manufacture's instructions.

LAKSHMI BUILDERS

SANDR