C/o AE office cum Residence Building at Thural Distt. Kangra (HP)

Amount

Excavation in foundation, trenches etcetera in earth work involving all kind of classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST and other taxes imposed by the government.

Excavation in drains and channels etc; in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. Rate inclusive royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Filling with stone/brick aggregate under soak pit including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, Footings, bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular or polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for cast in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls up to any thickness/ any height.The Rate is inclusive of cost and carriage of material with all lead & lift and other incidential and toll taxes, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty millimetre) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and vibrated and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millimeter) with cement contents not less than 330 kg/ cum (Three hundred thirty Kilogram per cubic metre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of columns, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of Royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 20mm millimeter nominal size & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millimeter) with cement contents not less than 330 kg/ cum (Three hundred thirty Kilogram per cubic metre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs landings and shelves and their supports, balconies, beam girders, bressumers and cantilevers as per specification approved drawing/ design in all depth/thickness etecetra upto all floor levels/ heights Coffer etc. including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre)with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in coulmn, pillers posts and struts in all depth/thickness upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of garde M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in moulding as in cornies, window sills etcetra in girth upto all floor levels. The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20(M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton pwr square millimetre) and minimum cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10( Zero point ten)meter. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:5:10 (One cement : five sand : ten graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size including curing complete in parapets and the like etcetera including the cost of form work as per drawing and M.O.R.D technical specification clause 802, 803, 1202 and 1203 as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying tor steel of TISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure up to all floor level as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement isto five sand) including curing complete as per approved specification, drawing and design and curing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement isto six sand) including curing complete as per approved specification, drawing and design and curing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. channels of TATA/Sai in doors, windows clerestory windows frames manufactured from M.S. channel section 35x35x4mm (Thirty five into thirty five into four millimetre) with M.S. flat 50x4mm (Fifty into Four millimetre) combination as per specifications design, drawing including hinges, jambs, beads if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butt hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements, shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm (Fifty into forty seven millimetre) with a wall thickness of 5mm (Five millimetre) made out of extruded 5mm (Five millimetre) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. (Two numbers) of 150mm (One hundred fifty) long brackets of 15mmx15mm (Fifteen millimetre into fifteen millimetre) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (Nineteen millimetre into nineteen millimetre) M.S. square tube of 19 (nineteen) gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100long with wooden or rawl plugs emedded in masonry complete as per manufactures specification & direction of Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing M.S. channels in doors, windows clerestory windows frames manufactured from M.S. channel section 75x40x4mm (Seventy five into Forty into four millimetre) with M.S. flat 75x4mm (Seventy Five into Four millimetre) combination as per specifications design, drawing including hinges, jambs, beeds if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements, shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge.The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm thick factory made wire mesh solid PVC door shutters consisting of frame made out of M.S. tube of 19 gauge thickness of size 19mmx19mm for style and 15mmx15mm M.S. square tube for top, bottom & Lock rail M.S. frame shall have & coat of steel primer and covered with 5mm thick PVC solid sheet heat moulded "C" channel of size 75mmx30mmx60mm out of which 10mm shall be bent at 90degree towards inner side on front face of the door M.S. frame at lock rail shall be covered with 100mm wide PVC sheet out of which 10mm on both the edges shall be bent at 90 degree on front face of the door and 85mm wide PVC sheet shall cover the M.S. frame at top, bottom & lock rail lof 70mm on back side of door 5mm thick 20mm wide cross PVC sheet as gap insert for top and bottom rail, PVC sheet beading of 10mm thick, 15mm wide PVC sheet beading in to be stick internally in the back side of style and rails of door with solvent cement adhesive i/c fixing of G.I. wire mesh 85G or 0.56 dia wire fixed between PVC sheet of style and rail bent at 90 degree on front face using 15mmx15mm L-shape PVC beading nailed on style a rails i/c fixing shutter to existing door frame with M.S. butt hinges 100x58x1.90mm with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing factory made double steel shutters side hungs (one glazed and one wire guage) of standerd rolled steel sections, jointing mitered welded with manufactured to relevent ISI standerd specification with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing glass pans with special putty of glazed side of shutter and wire guage of IS designation 85G with metal beading on other side complete i/c priming coat of red led paint complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 6mm (Six millimetre) thick ply wood Uniply/Greenply/ Action Teara with butt jointing and nails (Frame work and cover fillets to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof termit resistante Pre-laminated M.D.F (Medium Density Fibre) board of Centuary/ Marino (ISI marked) for shutters for cup board with hard wood edging complete including bright finished black enamelled iron butt hinges with screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof termit resistante Pre-laminated M.D.F.(Medium density Fibre) board of Centuary/ Marino (ISI marked) for cup board with hard wood edging complete including bright finished black enamelled iron butt hinges with screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof termit resistante Pre-laminated M.D.F (Medium density fibre) board of Centuary/ Marino (ISI marked) shelves/ box for cup board with hard wood edging of approved shades complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 40mm (Forty millimetre) thick 2nd class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled in but hinges with necessary screws complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 40 mm thick (Fourty millimetre) 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G (Eighty five guage) with wire of dia 0.56 mm (zero decimal five six millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete including entire carriage of material within all leads and lifts and other incidential, as per specification, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing Factory made Century/ Alpro or equivalent 35mm (Thirty five millimetre) thick flush door shutters both side commercial including non decorative phenol bonded termite resistant and bailing water proof core of block board constructed with frame of Ist class frame of hard wood and well matched commercial 3 (Three) ply veneer with vertical grains of cross bands and face veneer on both faces of flush door EPDM gasket complete including entire carriage of material within all leads and lifts and other incidential, as per specification, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Factory made Century/ Alpro or equivalent 25mm (Twenty five milimetre) thick flush door shutters both side commercial including non decorative phenol bonded termite resistant and bailing water proof core of block board constructed with frame of Ist class frame of hard wood and well matched commercial 3 (Three) ply veneer with vertical grains of cross bands and face venner on both faces of flush door EPDM gasket complete including entire carriage of material within all leads and lifts and other incidential, as per specification, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lugs 10cm (Ten centimetres) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Fixed steel windows

Top hung Ventilators

Providing and fixing Mild Steel grills 10mm x10mm (Ten millimetre into ten millimetre) square bars in combination of 20x4mm (Twenty into four millimetre) Mild Steel flat of required patterns in frames of windows etcetera with round headed bolts and nuts or by screws complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing coloured / anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

300x16mm (Three hundred into sixteen millimetre) size

250x16mm (Two hundred fifty into sixteen millimetre) size

Providing and fixing coloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete including carriage of material with all lead, lifts and other incidentail as per specification, approved drawing, design and as directed by the Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

200x10mm (Two hundred into ten millimetre) size.

100x10mm (One hundred into ten millimetre) size.

Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

125mm (One hundred twenty five millimeter) size.

100mm (One hundred millimeter) size.

Providing and fixing oxidized aluminium hooks and eyes 150 mm (One hundred fifty millimetre) size complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 65x35mm( Sixty five into thirty five millimetre) special quality chromium plated brass cup board lock with six leavers including necessary screws etc. complete (Indian make) including carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 60 mm ( Sixty millileters) thick heavy duty precast cement concrete inter locking paver blocks of NTC with vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm( twenty five millimeters) thick average thickness of cement mortar 1:4 (one1 cement :four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be measure sepertely.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600mm( six hundred into six hundred millimeter) acid resistance vetrified tiles of Restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade and design as per drawing and specification in flooring, treads of steps and landing laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement: three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as reuired complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600mm( six hundred into six hundred millimeter) acid resistance vetrified tiles of Restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade and design as per drawing and specification in skirting risers of steps and dados laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement: three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as reuired complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x10 mm ( three hundred into three hundred into ten millimeters) thick antiskid ceramic tiles of premum quality of Nitco/ Kajaria/ Somany/ Well/ Johnson as per approved shade and manufacture in flooring over 12 mm ( twelve millimeters) thick cement mortar 1:3( one cement: three sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm ( three hundred into four hundred fifty millimetre) thick antiskid ceramic tiles dado of premum quality of Nitco/ Kajaria/ Somany/ Well/ Johnson as per approved shade and manufacture in skirting, riser of step and dado over 12 mm ( twelve millimeters) thick cement mortar 1:3( one cement: three sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Precast automatic hydraulically compressed terrazzo tiles 22mm thick with cement concrete chequred tiles of 30cmx30cm (Thirty centimetre into thirty centimetre ) size laid in floor treads of steps, ramp and landings on a bed of 25mm average thickness of cement mortar 1:6 (one cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete with tiles of silver grey shade ISI marked I.S 1237 of approved shade and ratio including carriage of materials within all leads and lifts and other incidentals

Providing plinth protection with 60 cm ( Sixty centimeter) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimeter) dia half sand stone ware pipe for drainage purpose including laying over concrete 1:5:10 ( one isto five isto ten) complete within all leads and lifts of materials and other incidentals . Rate inclusive toll tax, GST and any other taxes imposed by the government.

Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA durashine/ sail over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating Tata/ Sail/ Reliance/ Jinda including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts and other incidentals as per specification, approved architectural dawing, design and as directed by Engineer-in-charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips having propper Gola shape 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA/ Durashine for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted GI limpet and prepainted bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA/Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 5 (five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted GI limpet and bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet of 2 mm (two millimetre) thickness for eaves board/Facia/Soffit/Ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (one hundred fifty millimeter) diameter pipes on wall face UPVC for rain water pipes of supreme/sant/finolex/prince working pressure not less than 4.00/6.00 kg/ sqcm (four to six kilogram) per square centimetre including filling the joints with approved adhesive complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (one hundred fifty millimeter) diameter UPVC plan bend on wall face accessories for rain water pipes of supreme/ sant/ finolex including filling the joints with approved adhesive complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (one hundred fifty millimeter) diameter UPVC plan shoe on wall face accessories for rain water pipes of supreme/ sant/ finolex including filling the joints with approved adhesive complete as per PWD specification. The rates are inclusive carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing MS holder bat clamps of approved design for PVC rain water pipes embeded in cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etcetra complete as per PWD specifications. The rates inclusive carriage of materials within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections of Tata/Sail/Jindal composed in beams, joists, channels, angles, tees flats with connecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing and scaffolding complete as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth, in rough side with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth, with cement mortar 1:5 (one cement isto five sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Painting two coats of Nerolac/Berger/Asian Paint (excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying a priming coat over new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints brushing wood primer pink as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughtly brushing the surface free from mortar droppijngs and other foreign matter and including preparing the surface even and sand papered smooth within all leads and lifts of material and other incidentals. The rates includes octori, royality, malkana, toll tax, GST and other taxes imposed by the Government. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Distempering (two or more coats) with oil bound washable distemper of Berger/Nerolac/Asian Paint and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. rectangular pipe stair railing over M.S. flat having baluster 19mmx19mm (Nineteen millimetre into nineteen millimetre) M.S. solid square bars SWG-16 gauge with a clear height of 85cm (Eighty five centimetre) @ 30 (Thirty) centimetre centre to centre, embeded in cement concrete steps and jointing with electrical gas welding at top along with hand rail of teak wood 6.25x7.50 cm (Six decimal two five into seven decimal five centimetre) ( SWG-16) Vertical M.S solid squiare bars, baluster welded/ jointed with each with 2 Nos. (Two number) M.S flat of 37.5x5mm (Thirty seven decimal five into five millimetre) complete with a priming coat of read lead paint as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing orisa Pan No 2071 of size 58x44 cm( fifty eight into forty four centimeter) vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera/hindware/star white/ snow white shade with low level PVC cistern (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including entire carriage of materials within all leads and lifts as per direction of Engineer-in- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. of star Sr. No 20087 (S-50) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) wash down water closet hindware/jaguar/cera of star white/ snow white including jet pressure integral P or S trap including jointing the trap with soil pipe in fixture ( seat cover/ jet pressure to be paid sepertely) including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimeter) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing plastic seal ( solid/hollow type) and cover for wash down water closet with C.P. brass hinges ad rubber buffers ( solid type) white plastic seat and cover.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level duel flushing cistern of Cera/Hindware/Jaguar with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Garnet No 10080 and size 55x40 cm ( fifty five into forty centimetre) ( under counter basin of Hindware/Cera/Jaguar) of of white/ snow white with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same including all fitting complete in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing heavy quality stainless steel kitchen sink of approved standard ISI marked with drain board and C.P. waste pipe C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting 600x480x150 mm (six hundred into four hundred eighty into one hundred fifty millimetre) with bowl depth 20 mm ( twenty millimeters)including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. brass waste (Heavy duty make ISI marked NO-8931 & 8934) for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters rubber plug for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters M.I. union for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetres) diameters C.P. brass waste (Heavy duty make ISI marked NO-8931 & 8934) Jal/ Jaguar for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP grating of ESS or nalhni trap of approved brand complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PTMT/PVC jet sprey of continental series/clasic series/floral series of jaguar/ hindware/ cera for Europen seat of approved brand and manufacture, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) beveled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers of Atul/Modi Guard/ Golden fish including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 600x20mm (Six hundred fifty into twenty millimetre) of continental series of Jaguar/Classic of Hindware/Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass socket including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing chromium plated brass soap dish of ESS with C.P. brass brackets fixed with cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap of continental/ Hindware/Classic Series within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing casealed C.P. brass stop cock Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked ) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC connection 15 mm( fifteen millimeters)nominal bore and 450 mm ( four hundred millimeters) long including necessary fitting complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and placing water tank of make PVC (Poly venyl chloride) Sintex having capacity 1000 ( One thousand hundred ) litres each with necessary fitting including over flow pipes scour pipe and bull valve and with cover locking arrangement of good quality including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing polythene aluminum polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon of KITEE confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etc. but excluding the cost of fitting internal work pipe exposed on wall 1216-16 mm O.D. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying to galvanized mild steel tubes (medium grade) 20mm (Twenty millimetre nonminal size/ diametre) in trenches including all tube fittings of Jindal/TATA Steel such as nipples, elbows, unions, tees and clamps and (earth work trenches paid for seperately) of within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying to galvanized mild steel tubes (medium grade) 15mm (fifteen millimetre nominal bore/ diametre) including all tube fittings wall sealing and floor of Jindal/TATA Steel nipples, elbows, unions, tees and clamps and within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing gully trap grade"A" compete with C.I. gratting brick masonry chamber in cement moratr 1:5 (One cement isto five sand) and water tight C.I. cover with frame of 300x300 mm (Three hundred into three hundred millimetre) size ( inside) the weight of cover to be not less than 4.53 Kg (Four decimal five three kilograms) and frame to be not less than 2.72 kg (Two decimal seven two kilograms) square mouth traps 150mmx100mm (One hundred fifty into one hundred millimetre) size P or R Type complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One Cement isto four sand isto ten graded stone aggregate) bedding for stoneware pipes of the 150 mm ( One hundred fifty millimeters) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete of Finolex/Vectus/red pipe within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge Rate inclusive toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimeters)

110 mm ( One hundred ten millimeters)

Providing and fixing PVC Single Equal Branch with oval asses ISI Marked insertion rubber washer 3 mm thick bolt and nuts complete including fixing with approved adhesive etc. Complete. within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimeters)

110 mm ( One hundred ten millimeters)

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply including Tee, Albows, reolucers/ connecttors corepluers and clamps with joint testing and fitting complete including cutting and making good the walls extra including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Equal Tee (1216)

Female elbow (1216x mm thread)

Male thread connector (1216x15 mm)

Female thread connector(1216-15 mm )

Providing and fixing 110 mm ( One hundred ten millimeters) PVC Clamps ISI Marked od approved design with steel screws and rawal plug etc. Complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Viterous china urinal large flat back no 60002 size (39x37.50x54 cm) ( thirty nine into thirty seven decimal five into fifty four centimetre) urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and Paid separtely) of star white/snow white Hindware/Cera/Jaguar within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Floor Trap size 110x75 mm ( one hundred ten into seventy five millimeters) ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing water collection chamber 300x300x500mm (three hundred into three hundred into five hundred millimetre) in side size for collection of water with cement concrete slab 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimeetre) nominal size) 75mm (seventy five millimetre) thick foundation concrete 1:5:10 (one cement : five sand : ten graded, crushed stone aggregate 40mm (forty millimetre) nominal size) finished with floating coat of neat cement and 100mm (one hundred millimetre) cast insitu plain concrete wall in 1:2:4 (one cement : two sand : four graded,crushed stone aggregate 20mm (twenty millimetre nominal size) including form work complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.i. manhole with frame cover weight 38kg (thirty eight kilogram) (single seat) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) including entire carriage of material within all leads and lifts and other incidentals.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mmx6mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying ( to level or slope) of PVC 110 mm (One hundred ten millimetre) of sewerage pipe of working pressure not less than 4.5 kg/sqm. (Four decimal five kilogrms per square metre) of Fenolex/Vectus/Reliance including filling the joints with approved adhesive complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Supplying and fitting water lifting pump 1.00 H.P. (One horse power) capacity including all necessary fittings complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Sanjay Sehgal

ARIT SOOD