RENOVACTION OF INDERPUR INSPECTION HOUSE AND ZILEDARI SECOND OFFICE IN DISTRICT BALLIA LOT 07

Amount

Dismentaling existing plaster including disposal of refuse with in a distance of 60m (of inspection house(both interior & exterior wall) & Ziledari office(both interior & exterior wall) & boundary wall.

Dismentaling doors, window and Ventilator including chaukhat with hold fast including stacking of materials.(of inspection house & Ziledari office)

Dismentaling brick work cement concrete in lime or cement mortar and including stacking of material with in a distance of 60m as per direction of Engineer-in charge.

Dismantaling reinforced cement concrete(of roof slab of ziledari office) including stacking of dismantled material within 60m distance.

Centering and shuttering for R.C.C. & C.C. work including cost centering & shuttering upto 3m height including all cost of materials,T&P and labours etc.

Laying CC (1:1.5:3) M-20 with cement, coarse sand having FM not less than 2.0 and hard stone grit 10 to 20 mm (for ziledari second office roof slab, pillar,gate pillar)including all cost of material, labour, T&P etc. with all leads and lift for proper completion of work as directed by Engineer-in-charge as per drawing and I.D. specification.

1st class Brick work in 1:4 CM with Ist class bricks and coarse sand having F.M. not less than 2.0 (for ziledari office and upgradation of boundary wall) including cost of all material, labour and T&P etc. required for proper completion of the work.

Reinforcement of steel bar with cutting, binding,bending & proper placing including all cost of materials,labour and T&P etc. required for proper completion of work.

12 mm thick plaster in 1:4 CM with coarse sand of Inspection house(interior&exterior wall),Ziledari office(interior&exterior wall) & boundary wall including cost of material, labour and T&P etc. required for porper completion of the work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete for size of Tile 60 X 60 cm (in inspection house & Ziledari office).

Supply and fixing 6mm thick CHINA white glazed tiles(ceramic tiles) in flooring skirting or dado with 1:3 cement & approved coarse sand(in kitchen & toilet of inspection house &Ziledari Office) working & the joints finishing with white cement slurry, jointing & polishing complete including supply of all materials & wastage labour tools & etc. Required for the proper completion of the work.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepared the surface even and smooth complete(in Inspection house& Ziledari Office).

Two Coat Wall painting of Inspection house,Ziledari Office & Boundary Wall with as per approved brand & manufacture such as Berger,Asian Paints etc. after thoroughly brushing the surface free from mortar dropping including all cost of material, labour and T&P etc required for proper complition of work as per direction of Engineer -in -charge. t( in Inspection house, Ziledari office & boundary wall).

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. Thehinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

24 mm thick factory made decorative door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm & wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and railsmitred & joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm & stainless steelscrews.The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)wallthickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1mm) wall thickness. The panels filled vertically & tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod & fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.(in Inspection house & Ziledari Office).

Providing and fixing aluminium handles, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete : 10mm dia 100mm long

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete : bolt 16mm dia 250mm long

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868 ) transparent or dyed to requiredcolour orshade,withnecessary screwsetc.complete :10 mm dia 100mm long

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding.

Supply and fixing of 32 MM thick Decorative doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (Decorative)

Providing and fixing 18 mm thick gang sawcut,mirror polished,premoulded and prepolished,machine cut for kitchen platforms, vanity counters,windowsills, facias and similar locations of required size,approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finishetc. complete at all levels. Area of slab over 0.50 sqm

Electrification

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

Supplying & fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required

Supplying & fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc.as required. 8 Module (125mmX125mm)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired 8 way , Double door

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired. 12 way , Double door

Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required (AC point)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (DB to Power)

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. Single pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking rrangement and watering pipe etc.with charcoal/ coke and salt as required.

S/F of LED street light fitting having diecast aluminium body and diffuser / reflector with driver set suitable for 75 watt to 90 watt conforming to IP 65 protection complete in all respect.

Supply and fixing following modular switch / socket on the existing modular plate & switch box including connection as required

5/6 A Switch

15/16 A Switch

3 Pin 5/6 A Socket

T.V Antena Socket

15/16 Socket

Supplying and Laying of aluminium conductor ,PVC insulated armoured , served sheeted cable 1000 bolt grade st a depth of 750 mm below ground level over sa cushion of 75 mm thick sand around and protected with burnt brick on side and top surface completeas required.

Main Distribution Board 4 way Vertical Distribution INCOMER - 63 Amp ,TPN, MCB . OUTGOING 40 Amp TPN , MCB -2 Nos ,63 Amp TPN MCB - 1 Nos Spare,40 Amp TPN MCB - 1Nos Spare

Earthing with copper earth plate 600x600x3 mm thick including accesssories , and providing masonary enclosure with cover plate having locking arrangment and watering pipe of 2.7 mtr long etc with charcoal/coke and salt as required

Senitry Wear

P/F C.P.V.C pipe ,having thermal stability for hot & cold water supply ,including all CPVC plain& brass threated fitting , including jointing of pipe with clamp at 1.00 m spacing. this included jointing of pipe & fitting with one step CPVC solvent cement and testing of joint complete as per direction of Engineer in charge. (Internal exposed in wall )

P/F C.P.V.C pipe ,having thermal stability for hot & cold water supply ,including all CPVC plain& brass threated fitting , including jointing of pipe fitting with one step CPVC solvent cement and testing of joint complete as per direction of Engineer in charge. (External exposed in wall )

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (15mm dia)

P/F C.P. brass angle valve for cistern , wash basin, Gyeser etc 15mm nominal hole size including cost of all materials, labour T&P etc.

P/F 15mm nominal hole size C.P. stop cocks

Fixing 15mm PVC connection, heavy quality with brass Union including supply of all materials, labour T&P etc. required for proper completion of the work.

P/F in position C.P. brass towel rail complete with brackets including gchases in wall and repairing the same in 1:3 CM complete.

Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. Brassscrews.

P/F C.P. Jali for Nahani Trap 100mm dia including cost of all materials

P/F C.P. Brass waste pipe for sink and washbasin in 32mm dia complete, cost of all materials, labour T&P etc.

P/F wash basin with single hole/number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole & making good the same but excluding fittings ( 630 X 450cm.)

P/F stainless steel kitchen sink with C.I.bracket excluding cost of other fitting. (Kitchen sink without drain borad size (610 X 510 X 200mm)

P/F 15mm nominal hole size C.P. brass pillar cocks.

P/F chromium plated shower rose with 15mm as 20mm inlet complete and 100mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing & Fixing water closet Squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 ltr low level white PVC flusing cistern with manually contrilled device (handle lever) confermng to IS : 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vetreous china orrisa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (Europeantype) with seat and lid, 10 litre low level white vitreous china flushing cistern& C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflowarrangement with specials of standard make and mosquito proof coupling ofapproved municipaldesign complete, including painting of fittings andbrackets, cutting and making good the walls and floors wherever required :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (110 mm diameter)

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

(a) 110 mm bend

Single tee with door (110x110x110 mm)

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes (100 mm dia pipe)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing, Laying and fixing inj position salt glazes S.W. full round pipe , IS:651 (grade-A) with 1:2 cm with spun yarn or gasket laid under ground over 15cm C.C. 1:4:8 and in cased in proper gradient including excavation of trenches up to 2m depth (150mm dia)

Proving and Fixing of 40mm gun metal Gate valve with C.I. wheel of approved quality

Proving and Fixing of 20mm dia ball valve (Brass) of approved quality, high or low pressure with plastic floats.

Constructing Septic tank (20 User Size 2.30X1.10X1.80) with brick work in cement mortar 1:4 (1 cement and 4 coarse sand), cement concrete 1:2:4 (1cement, 2 coarse sand, 4 graded stone aggregate 20 mm. nominal size ) in foundations/base, baffle walls in half brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size ) 12 mm. thick cement plaster 1:3 (1 cement, 3 Coarse sand ) inside finished with a floating coat of neat cement. The rate includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering,shuttring etc. complete with required each heavy duty SFRC type MH/IC covers and frames, vent pipe and all other assessories as directed at site by the Engineer in Charge.

Making soak pit 2.5 m. diameter and 3 m. deep with 45 x 45 cm dry brick honey comb shaft with F.P.S bricks and SW drain pipe complete as directed at site by the Engineer in Charge.

(A) Mix in place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Speicification Clause 401 1:6;12

Providing and laying of Rubber Moulded interlocking concrete block pavement having thickness 80mm as per drwaing and technical specificateion clause 1504

old and used Brick work in 1:4 C.M. per cum for side wall. For interlocking etc.

Brick soling with straight over burnt bricks lade edge & dry (labour only) includingpreparation of sub grade to prescribed camberfilling joints with local earth spreadingblinding coat, 1cm. (3/8") depth of local earthover the entire surface & including labour &T&P etc. required for proper completion of thework. 100sft. preparation of sub grade.

DINSH SINGH