Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND BEING L1 BIDDER | |
| 2 | L2₹24.5 L+₹2.3 L (10.2%)Rejected-Finance NIL | THE NILGIRIS | TAMIL NADU | 638451 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹24.8 L+₹2.6 L (11.6%)Rejected-Finance MINISTRY OF DEFENCE MES JALPAIGURI WEST BENGAL | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹25.0 L+₹2.8 L (12.4%)Rejected-Finance VILL POST BARANACHINA PS DINHATA DIST COOCH BEHAR 736135 | COOCHBEHAR | WEST BENGAL | 736135 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹27.0 L+₹4.8 L (21.4%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
24 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE BINNAGURI
HQ CWE BINNAGURI, BINNAGURI CANTT, JALPAIGURI, WEST BENGAL, PIN-735232
PROVN OF ROAD AT TELEPARA-1 AT BINNAGURI MIL STN UNDER GE SOUTH BINNAGURI
2023_MES_587197_1
8057/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
BINNAGURI MIL STATION
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (S) BINNAGURI
₹75,000
Yes
6 May 2023
27 Mar 2023
26 Apr 2023
27 Mar 2023
24 Apr 2023
11 Apr 2023
Amount
Excavating over areas in Soft/loose soil soil n exc 1.5 m deep and getting out, complete all as specified and directed by Engineer-in-charge.
Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge
Rolling and consolidating formation surfaces in cutting with power roller exc 8 Tonne and n exc 12 tonne, complete all as specified and as directed by Engineer-in-chage.
Forming embankments including raising (or lowering) earth, spreading in layers n exc 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc n exc 1.5m high from base, complete all as specified and as directed by Engineer-in-charge.
M&L for 100 mm thick (spread thickness) soling with broken boulders or quarried stone, interstices filled, surface formed and rolled & consolidated to required gradient & camber with 8-12 tonne power roller, complete all as per specified and as directed by Engineer-in-charge.
M&L for 150 mm thick water bound macadam in two equal layers of 75 mm each (compacted thickness) with coarse aggregate of stone (Granite, trap or Basalt) of grading - 2 ( 63 mm to 40 mm size ) or of grading - 3 ( 50 to 20 mm size ) and consolidated to required gradient & camber with 8 to 10 tonne power roller, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing unsurfaced water bound macadam by brooming with wire brush etc for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags removing all loose dirt etc and applying a priming/ tack coat with catonic emulsion RS-1 @ 3.50 Kg/10 Sqm using Paving bitumen, complete all as specified and directed by Engineer-in-charge.
M&L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen Vg-30 @ 4% (minimum) by the weight of total mix of any pernetration compacted to required gradient and camber with 8 to 12 tone power roller, complete all as specified and directed by Engineer-in-charge. NOTE : (i) No extra allowances shall be admissible to the contractor if the bitumen content is required more than 4% by the weight of total mix as per approved design. The contractor shall quote the rate accordingly.
M&L for Preparing of existing black top surface of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with machenical air air compressor and gunny bags to remove all loose dirt etc and applying evenly a priming /tack coat with catonic emulsion RS-1 @ 2.50 Kg/10 Sqm using Paving bitumen on black top road sufface by mechenical, complete all as specified and directed by Engineer-in-charge.
M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) and , complete all as specified and directed by Engineer-in-charge Note : (a) Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi sense asphaltic concrete to be laid. (b) Semi dense ashphaltic bituminous concrete shall be designed as specified and binder content shall be provided as per design mix, contractor shall quoted his rates considering the bitumen contents as 5.5%. Any variation in binder content on minus side shall be adjusted at the rate of Rs 50.00 per kilogram of binder but vartiation in binder plus side shall not be paid extra contrator shall quote accordingly.
M&L for 2.5 mm thick painting to road surfaces as in lines, dashes, arrows, letters , zebra crossing etc on roads, pavements and like with thermoplastic road marking paint @ 5 kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfaces while the painted surfaces are hot by mechanical means including cleaning surfaces, complete all as specified and directed by Engineer-in-charge. (Note. The painting shall be carried out through mechanical appliances by the company's approved applicatior).
S&F of Bi-directional Abrasion resistant Raised pavement markers made out of micro prismatic tough polycarbonate lens of approved colour, Engineered thermoplastic body and fixed on the road with Epoxy including making good the disturbed portion of the road, complete all as specified and directed by Engineer-in-charge.
M&L for Continuous brick edging with old size sub class 'B' bricks, with width equal to the width of the brick laid dry on end vertically, complete all as specified and directed by Engineer-in-charge.
SG ENTERPRISE
NARAYAN MAJUMDER
PULAK SAHA
samrat saw mill and joinery workshop
BHANU GAJMER
SHRI MANOIRANJAN BISWAS
JYOTIRMOY TRADING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .