Annual maintenance of Sri Venugopal Swamy Temple Skandapushkarini Kalyanamandapam at Karvetinagaram and Tirumalaraju puram in Chittoor district for the year 2026 27

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. Ordinary soil-Manual means upto 3m depth.

Municipal limits

Mandal limits (Tirumala rajapuram)

Conveyance of excavated earth / debries with a lead of 1 kM including loading, unloading, all incidental and operational charges etc., complete as directed during execution.

Municipal limits

Mandal limits (Tirumala rajapuram)

Filling of foundations and basement with good gravel in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work. Note: Cost of transportation of good quality earth has not been included. Only labour for carrying carted earth with a lead of 50m to the foundation pits has been taken in the rate. The cost of carted earth/sand may be workked out separately if the same is not available from adjoining area.

Municipal limits

Mandal limits (Tirumala rajapuram)

Cement Concrete CC(1:2.5:5) using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Municipal limits

Mandal limits (Tirumala rajapuram)

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Random Rubble masonry Cement Mortar (1:6) proportions using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones)

Municipal limits

Mandal limits (Tirumala rajapuram)

Construction of Brick Masonry in CM (1:6) well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

-do- in CM (1:5)20mm

Municipal limits

Mandal limits (Tirumala rajapuram)

- do- in CM (1:3) 20 mm thick

Municipal limits

Mandal limits (Tirumala rajapuram)

- do- in CM (1:5) 12 mm thick

Municipal limits

Mandal limits (Tirumala rajapuram)

- do- in CM (1:3) 12 mm thick

Municipal limits

Mandal limits (Tirumala rajapuram)

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Supply of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS:2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge

Though scrapping for old plastered surface and clearing away the material for the work .

Municipal Limits

Mandal limits (Tirumala rajapuram)

Painting with two coats for Old work with acrylic exterior emulsion paint having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. - (external) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls .

Municipal limits

Mandal limits (Tirumala rajapuram)

Painting Single coat for Old work with acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Municipal limits

Mandal limits (Tirumala rajapuram)

Painting priming coat for for Old plastered surface with water based Cement primer exterior Gr-2,(Water Thinnable) including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

Municipal limits

Mandal limits (Tirumala rajapuram)

Polishing the old wood work with best French Spirit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Painting Single coat for old wood work/ old plastered surface with ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Municipal limits

Mandal limits (Tirumala rajapuram)

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

Supply of M.S.Angles, Flats, square rods etc,. Including cost and conveyance of all materials etc,. Complete,.

Mild Steel Tubes & pipes of all diameters as per IS-1161

Labour charges for fabricating and fixing of steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position

Municipal Limits

Mandal limits (Tirumala rajapuram)

Hire charges for Core drilling machine / Drilling equipment as directed during execution.

Hire charges for Supply and erection of digital design flex banner with required material like threads and sticks etc., to erect specified place as directed by the department. The cost is including material, labour for printing, erection and removal after completion of the function etc complete as directed during execution.

Writing slogans, Rangolies around the temple, over the compound wall and inside the Dhyanamandiram etc., with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint , labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Supply of best country wood scantlings (Vepa/neredu) 2 to 3 meters, free from knots as directed by the department including cost and conveyance etc., complete.

Supply of medium teak wood Scantlings up to 2.0 mts.

Supply of Medium teak wood planks any thickness.

Supply of Country nails

Supply of wood adhesive compound

Supply of unskilled workmen (man / women mazdoor) for attending different works as and when necessary, as directed during execution for works within muncipal limits and mandal limits as directed during execution. The payment will be made as per the actual labour engaged.

Municipal limits

Mandal limits (Tirumala rajapuram)

Supply second class carpenter / painter for miscellaneous work in connection with car festival etc at temples with in muncipal limits and mandal limits as directed during execution. The payment will be made as per the actual labour engaged.

Municipal limits

Mandal limits (Tirumala rajapuram)

Hire charges for Angle Dozer 90 hp for Spreading,Cutting and cleaning as directed during execution

Supplying and fixing of BITW coat hanger of size 0.60 x 0.076 x 0.025 m including finishing smooth the teak wood reapers and polishing with two coats of French Polish over Bee waxing of approved quality and fixing the specified (CP or aluminium ) coat hooks of different sizes of required numbers at equal spacing as directed during execution and fixing the coat hangers to the walls including cost and conveyance of all materials like screws, nails etc( excluding cost of hooks and fixing charges).

Supplying & fixing NP coat hooks

Municipal limits

Mandal limits (Tirumala rajapuram)

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Supply of anodized Alluminium fittings with ISI mark IS 204 (pt-II) 1978.

- do - Aluminium Aldrop (IS:2681) 300 mm long

- do - Aluminium Aldrop (IS:2681) 250 mm long

- do - Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long

- do - Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

- do - Aluminium Door Handles (IS:208) 100 mm Long

- do - 4mm thhick Pin headed glass.

Supplying, laying and jointing in position the following dia metre of Prince / sudhakar make or equilent quality PVC/ SWR pipe ( as per IS standards) 6 kg/sq.cm including labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

- do - 110mm dia PVC SWR pipe

- do - 75mm dia PVC SWR pipe

Supply following UPVC/SWR Pipe fittings including cost and conveyance of all materials and other incidental charges etc., complete.

- do - 110mm dia plain bend 87.50 Degree

- do - 75mm dia plain bend 87.50 Degree

- do - 110mm dia door bend 87.50 Degree

- do - 75mm dia door bend 87.50 Degree

- do - 110mm dia coupler

- do - 75mm dia coupler

- do - 110mm dia pipe clips

- do - 75mm dia pipe clips

- do - 110mm dia vent cowl

- do - 75mm dia vent cowl

Supplying 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings

Supplying & Fixing Orissa Pan white glazed W.C of size 580 mm x 440 mm 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap:

Municipal Limits

Mandal limits (Tirumala rajapuram)

Supply & fixing of PVC low level systemwith internal components & short bend:10 Litres capacity Single Flush

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap.

Municipal Limits

Mandal limits (Tirumala rajapuram)

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996.

Municipal Limits

Mandal limits (Tirumala rajapuram)

Supplying & Fixing Indian make Flat Back Wash Hand Basin of size 660 x 460 mm - Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block:

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm

Municipal Limits

Mandal limits (Tirumala rajapuram)

Providing Unplasticized PVC SWR Rain water downfall pipes for the 110 mm dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Municipal Limits

Mandal limits (Tirumala rajapuram)

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020,strength: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution.

Municipal Limits

Mandal limits (Tirumala rajapuram)

Supply of Rabbit wire mesh (Chicken mesh) of not less than 30 gauge

Supply of Weld mesh with openings of size 75x25mm(7GX11G)

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc.., excluding cost of chicken mesh but including cost and conveyance of all materials etc..., complete as directed during execution.

Municipal limits

Mandal limits (Tirumala rajapuram)

Finishing the sides of walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Municipal limits

Mandal limits (Tirumala rajapuram)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Municipal limits

Mandal limits (Tirumala rajapuram)

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight) with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Hire charges for Tractor with 2T Roller following as directed during execution.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealant . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

-do- Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Painting repolishing and including laying (weather proof) to the existing brass name boards and to provide 9 mm thick water proof ply wood at the rear side and also 25x15 mm BITW ornamental decorative repairs for all round the brass board including cost of plywood hooks, screws, polishing etc., as directed during execution.

Machine mixed and vibrated design mix concrete M30 for pavement works for durability consideration with necessary reinforcement using 0.425 cu.m of 19mm to 22mm HBG crushed metal 0.425 cu.m of 12mm to 14mm IRC HBG crushed metal, 0.406 cu.m of sand of any approved quarry and cement 415 Kgs with water cement ratio of 0.38 (158 lit/cu.m of C.C) well compacted including centering with steel or wooden frames, preferably steel frames in straight position casting, curing cost and conveyance of all materials including centering charges, form work etc., complete but excluding cost of steel and binding wire, fabrication charges etc., complete as directed during execution and neat finishing of top surface and also providing expansion joints, construction joints wherever found necessary excluding cost of asphalt pad etc., complete.

NOTE: if pavement concrete is laid in between the existing kerbs deduction may be made proportionately for centering charges of Rs.160.00/cum

Municipal limits

Operational charges for vacuum dewatering system for finishing the C.C Pavements with screed vibration, placing of filter mat , top mat, vacuum process, floating , troweling, Brooming with wire brush etc., complete as directed during execution.

Providing and fixing pre-cast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

Municipal limits

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Artist painting to like God / Animal / Birds pictures / Sceneries over Walls and MS sheet with three coats back ground (one coat primary & two coat synthetic enamel paint) the rate including cost of labour charges / Artist remuneration / materials cost like (Painting / brushes / scaffolding etc) complete as directed during execution.