Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹1.2 L
Closing Date
17 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Panchayat R&B Division Bharuch
(Package No. 89) Construction of Sisodara to Obha joining Road Ch. 0/0 to 1/70 Ta. Hansot Dist. Bharuch under MMGSY (Normal) Year-2025-26.
358984
14/2026-27
Open
Civil - All
Fixed-rate
Bharuch
5 documents required · 5 mandatory
₹3,600
Executive Engineer Panchayat R&B Division Bharuch
₹1.2 L
2 Nov 2026
2 Nov 2026
2 Nov 2026
17 Nov 2026
2 Nov 2026
90 days
No. figures Amount
1 Clearing and grubbing road land including uprooting wild 0.880 Hect. 28393.04
vegetation grass bushes, shrubs, sapling and trees of girth up to
300mm removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials as
per Clause-201 (area of light density) by mechanical means in
area of light jungle.
2 Box cutting the road surface to proper slope and camber for 262.50 Hect. 104.21
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed within all
lead and lift.
3 Earthwork in cutting in all sorts of soil and soft murrum including 520.00 Cum 127.75
conveying and spreading the stuff, embankment as and where
directed within 200 meters from the end of cutting with all
required lead and lift.
4 Providing, laying and spreading Granular sub base (Grade-I) by 1815.00 Cum 1022.12
providing close graded MCBT material in single layer with motor
grader on prepared surface, mixing by mix in place method with
rotavator at OMC and compacted with vibratory roller 80 to
KN static weight to achieve desired density etc. completed.
5 Providing & laying compacted layer of WBM of Grading-I MCBT 810.00 Cum 1368.55
metal of size 63mm to 45mm in required layers including using
16% stone screening, 13.2mm size and 8% stone dust as filler
including spreading, watering and consolidation by vibratory roller
as per MORTH specification etc. complete as directed by
engineer in charge.
6 Providing & laying compacted WBM Grading-II using MCBT 825.00 Cum 1425.11
metal of size 53mm to 22.4mm in required layers including using
24% stone screening, 11.2mm size and 8% stone dust as filler
including spreading, watering and consolidation by vibratory roller
as per MORTH specification etc complete as directed by
engineer in charge.
7 Earthwork for embankment including breaking clods, dressing 2826.00 Cum 183.70
with all lead and lift including rolling with power roller, watering
and consolidation from borrow pits within land width.
8 Providing and laying compacted of specified quarry spaull in side 264.00 Cum 843.35
shoulder including carriage of material and spreading on
prepared base including compacting as per MOST specification
etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
9 Providing and laying bituminous grout 37.5mm thick with asphalt 563.00 M.T. 2957.28
of grade VG-30 at the rate of 1.99% by weight of mix for mixing
@ 4.00 kg/10 sq.mt. for tack coat using B.T. chips of required
gradation including cleaning and heating asphalt premix materials
by hot mix process in proper gradation and laying with paver
finisher and consolidation by roller of 8 to 10 tonnes including
cost of all materials, asphalt aggregates, labour charges, royalty
charges etc. completed as directed including flushing key
aggregate @ 0.13 cum/10 sq.m.
10 Providing laying and rolling 25 mm thick open graded premixed 394.00 M.T. 3844.06
bitumineous carpet with B.T. aggregate as specified and using
bitumen for mixing with aggregate at the rate of 3.36 % i.e.
kg/MT. of total mix including heating and mixing in drum mix plant
and spreadig the same with paver finisher and consolidation with
vibratory roller including necessary firewood, oil, lubricants,
labour charges etc. using contractor's own drum mix plant and
equipment, tool etc. completed in accordance with the
requirement of specification.
11 Providing and laying sealcoat with B.T. agreegate as specified 203.00 M.T. 4095.55
using agreegate at the rate of 0.18 Cu.mt / 10 Sq.M. and bitumen
(VG-30) for mixing with agreegate at the rate of 4.50 % i.e.
Kg/M.T. of total mix including heating and mixing in drum mix
plant and spreading the same with paver finisher and
consolidation with vibratory roller including necessary firewood,
oil, lubricants, labour charges using contractor's own drum mix
plant machineries and equipment, tools etc. complete in
accordance with the requirement of specification.
12 Providing and fixing ordinary kilometer stone of approved hard 2.00 No. 704.34
stone as per IRC type design and fixing in C.C 1:4:8 including
lettering and paints etc. complete. (For ODR, V.R.)
13 Providing and fixing Hectometer stone as per I.R.C. type design 2.00 No. 356.50
including painting, lettering etc.complete (i) Fixing in C.C. 1:5:10
14 Providing and fixing Guard stone as per I.R.C. type design 93.00 No. 349.11
including white washing etc. complete (i) Fixing in C.C. 1:5:10
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
15 Hazard Marker Sign :- Providing and fixing sign boards made out 8.00 No. 3518.69
of 2mm aluminium sheet / 4mm ACP (Aluminum composite
panel) size 90 x 30 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best
quality epoxy paint reflectorised with Micro Prismatic Grade retro
reflective sheeting of Type-4 as per ASTM D-4956 and latest
M.O.S.T. Specifications; 1.8mtr long stand post of 75 x 75 x 6mm
/ 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with best
quality epoxy coatings in black and white bends. The details of
symbol for each board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x
45 x 60 cms. for each leg including excavation, curing etc.
complete under the supervision of engineer in charge. A warranty
for 7 years for the retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure test
report from third party test lab for the product offered shall be submitted by contractor.
(B) Class-B Type-4 Retro Reflective sheeting
16 Village Name / Bump Ahead Sign :- Providing and fixing sign 6.00 No. 6397.44
boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite panel) size 90 x 60 cms. rectangular as
per design of IRC-67-2012. Pre treated with phospheting process
& acid etching, coated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised with Micro
Prismatic Grade retro reflective sheeting of Type-4 as per ASTM
D- 4956 and latest M.O.S.T. specifications; 3.3mtr long stand
post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with best quality epoxy coatings in black and white bends.
The details of symbol or inscription/letters / numerals for each
board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms.
for each leg including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 7 years for the
retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by
contractor. (B) Class-B Type-4 Retro Reflective sheeting
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
17 Direction (Junction) Sign :- Providing and fixing sign boards made 2.00 No. 21287.51
out of 2mm aluminium sheet / 4mm ACP (Aluminum composite
panel) size 244 x 122 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching,
coated with one coat of epoxy primer and two coats of best
quality epoxy paint, reflectorised with High Intensity Prismatic
grade retro reflective sheeting of Type-4 as per ASTM D-4956
and latest M.O.S.T. Specifications; 4.0mtr (2 Nos.) long stand
post of Iron angle 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
x 50 x 5mm; painted with best quality epoxy coatings in black and
white bends. The details of symbol for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60 cms. for each leg including
excavation, curing etc. complete under the supervision of
engineer in charge. A warranty for 7 years for the retro reflective
sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test
lab for the product offered shall be submitted by contractor.
(B) Class-B Type-4 Retro Reflective sheeting
18 Citizen's Information Board : Providing and fixing of typical 1.00 No. 23062.34
information board as per instruction. Two M.S. plate of 1.6mm
thick of 900mm x 750mm size fixed at top and bottom duly
welded with M.S. angle with angles of 25 x 25 x 5mm thick M.S.
plate shall be welded by two vertical M.S. flat and four horizontal
M.S. flats 5mm thick to 75mm x 75mm of 12 SWG square tube
posts duly embedded in cement concrete M-15 grade C.C.
blocks of 600 mm x 600mm x 750mm below ground level.
Painting new letters and figures of any shade with ready mixed
synthetic enamel paint of superior quality in required shade and
coloured, all sections of frame joints and steel tube will be
painted with primer and two coats of epoxy paint as per drawing
clause 1701 & Annexure 1700.1 (10.16).
19 Road marking with hot applied thermoplast compound with 440.00 Sq.m. 367.73
reflectorising glass beads on bituminous surface and laying of hot
applied thermoplastic compound 2.5mm thick including
reflectorising glass beads @250 gms/sqmt area, thickness of
surface applied glass beads as per IRC 35. The finish surface to
be level uniform free from streaks and holes.
20 Supply & fixing logo board of MMGSY diamond size (600mm x 1.00 No. 22509.87
600mm) 16 gauge & board plate size (900mm x 250mm)
gauge thick M.S plate and 2.40 mt. deep length single angle 75 x
75 x 6 mm size including fitting and painting lettering with
luminous color as per drawing etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
21 Cautionary Warning Sign :- Providing and fixing sign board made 8.00 No. 3808.66
out of 2mm aluminium sheet size 90 x 90 x 90 cms equilateral
triangle as per the design of IRC-67-1977. Pre treated with
phospheting process and acid etching coated with one coat of
epoxy primer and two coats of best quality epoxy paint,
reflectorized with retro reflective sheeting as per the latest
M.O.R.T.H. specification, 3.1 Mt. long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x
75 x 6 mm; painted with best quality epoxy coating in black and
white bends. The details of symbol for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60 cms for each leg, including
excavation curing etc. complete under the supervision of
Engineer-in-charge. (A) Engineer grade (VR).
22 Informatory Warning Sign :- Providing & fixing sign boards made 2.00 No. 3856.90
out of 2mm aluminium sheet size 80 x 60 cms as per design of
IRC 67-1977. Pre treated with phospheting process and acid
etching coated with one coat of epoxy primer and two coats of
best quality epoxy paint, reflectorized with retro reflective
sheeting as per the latest M.O.R.T.H. specification, 3.1 mt. long
stand post and frame fabricated from suitable size iron angle of
35 x 35 x 3 mm, 75 x 75 x 6 mm; painted with best quality epoxy
coating in black and white bends. The details of symbol for each
board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms
for each leg, including excavation curing etc. complete under the
supervision of Engineer-in-charge. (A) Engineer grade (VR).
23 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting 40.00 Rmt. 3354.21
a "W" metal beam crash barrier comprising of 3 mm thick
corrugated sheet metal beam rail, 70 cm above road/ground
level, fixed on ISMC series channel vertical post, 150 x 75 x
mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by
hot dip process, all fittings to conform to IS:1367 and IS:1364,
metal beam rail to be fixed on the vertical post with a spacer of
channel section 150 x 75 x 5 mm, 330 mm long complete as per
clause 810)
24 Excavation for foundation up to 1.50 mt. depth including sorting 297.00 Cum 162.80
out and stacking of useful material and disposing off the
excavated stuff within all lead and lift for all sorts of soil.
25 Providing and laying in foundation with ordinary cement concrete 200.00 Cum 3105.12
M-100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
26 Providing and casting in situ ordinary cement concrete M-150 mix 238.00 Cum 3678.42
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete
without V-groove (A) height 0.0 to 5.0 mt.
27 Supplying and fixing reinforced concrete heavy duty non-pressure 45.00 Rmt. 6596.20
pipes with collars for culverts including setting and joining the
pipes in C.M. 1:2 watering and laying (to level or slopes) of I.S.
class NP-4 of 1200mm internal diameter.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
28 Providing and fixing I.S.I. mark T.M.T. Bar Fe-500D 3279.00 Kg. 76.22
reinforcement for R.C.C. work including binding, bending and
placing in position complete upto floor two level.
29 White washing with lime on wall surface (two coats) to give an 148.00 Sq.m. 12.09
even shade including thoroughly booming the surface to remove
all dirt, dust, mortar drops and other foreign matter.
30 Providing and casting in situ controlled cement concrete M-250 150.00 Cum 4318.76
mix with Trimix C.C. Road laid as directed including vibrating,
curing and filling in joints with bitumen complete.
31 Filling available excavated earth (excluding rock) in trenches, 55.00 Cum 130.40
plinth, sides of foundation etc. in layer not exceeding 20 cm in
depth consolidating each deposited layer by ramming and
watering etc. complete.
32 Providing and laying weep hole in abutment and returns by using 45.00 No. 82.57
A.C. pipes of 100 mm dia. with laying in proper grade and jointing
the completed as per detailed specification.
TOTAL Rs.
i.e. Rs. One Crore Twenty Two lacs Eighty Six thousand Three hundred Fifty Three and Fourty Eight paisa
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me
and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Ankleshwar Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - MMGSY.pdf
General Techical Specifications.pdf
Specification Index.pdf
Drawings.pdf
BOQ_MMGSY_2025_26_PACK_89_SISODRA TO OBHA.pdf
SBD_MMGSY_2025_26_PACK_89_SISODRA TO OBHA.pdf
NIT_MMGSY_2025_26_PACK_89_SISODRA TO OBHA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .