Completion of balance work of parking in front of Community hall in Kotwali bazaar Dharamshala in Ward No. 6

Amount

Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portion requiring blasting upto a distance of 20 metres dosposing of un-serviceable materials, stacking serviceable materials and neatly dressing the surface. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) For thickness of tiles upto 25mm including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Stone filling behind retaining walls including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick work including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in edges of slab and breaks in floors and walls under 20 cm wide including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying Duro stonevetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade inflooring, treads of steps and landinglaid on a bed of 12mm thick cementmortar 1:3 (1 cement : 3 sand) laidover and jointed with neat cementslurry finished with flush pointing inwhite cement mixed with pigment ofrequired shade to match the shade of tiles complete. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Wall painting (two coats) with acrylic memulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Painting two costs (excluding priming) cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter With Enamel paint other than white including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing M.S. celling Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling includingcutting, fixing and welding to steelroof members and applying a coat ofred lead primer complete as per theinstruction of Engineer-in-charge(Base members of steel work shall bemeasured & paid separtely) including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specifiedsizes laid in floors, treads ofsteps and landings on a bed of 25mm average thickness of cementmortar 1:6 (1 cement :6 sand)jointed with neat cement slurrymixed with pigment to match the shade of tiles (wherever required)incliding rubbing and polishing complete with tiles of followingshades:- red including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 1 mm thick M.S sheet sliding shutters with frame and diagonal braces or 40 mmx40mmx6mm angle iron 3.15 mm M.S gusset plates at junctions and corners 25mm dia pulley, 40mm X40 mm X6mm angle and T.iron guide at the top and bottom respectively, including applying a priming coat of red lead paint. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing & fixing reflector complete in all repect including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:Walls including attached buttresses,pilasters and their capsand basis and string courses etc.upto floor two level. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

15mm cement plaster in two coats backing coat 10mm and finishing coat 5mm thick on fair side of brick masonry/stone masonry/concrete walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth cement motal 1:5 (1 cement :sand) including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1( 1 cement : 1 sand) (seat and cover to be measured and paid for separately)Ordinary closet in white colour including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing vtreous china water closet squatting pan (Indian type W.C Pan) size 580 mm earth work.bed concrete. Foot rest and trap to be measured and paid for separately( Orrissa pattern) including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 110 mm dia. PVC 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately .including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. Or M.S brackets painted white including cutting holes and making good the same but excluding fittings : a Flat back 550mmx400mm including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing rubber plug for sink or wash basin 32mm dia including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PTMT waste coupling of approved quality 32 mm nominal bore including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PTMT bottle trap of approved quality for wash basin or sink 32 mm nominal bore including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing C.P brass bib taps with capstan head weigth 400 gms 15mm dia including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing brass angle valve 15mm without nuts and pipe: including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing C.P. stop cocks. 15mm dia including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 15mm mixer wash basin with top / botton swinging spout .15mm dia including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing in position with clamps etc. 32mm nominal internal dia meter galvanised steel tube flush pipe for high level flushing cistern includings connecting the flush pipe with cistern and cleset and making good the walls and floors including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PolyetheleneAluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall 1216 mm (16 mm O.D. pipe) including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PolyetheleneAluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall 1620 mm ( 20 mm OD pipe). including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PE-AL-PEcomposite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. Equal Tees 1216 mm size including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PE-AL-PEcomposite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. Reducing Tee 1620 mm size including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PVC connection pipes 30 / 45 cm long 15 mm bore/dia including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing PTMT jet spray of approved quality with one metre tube. including all lead and lifts and carriage of material as directed by the Engineer-in-charge

vishal