8790 WELCOME MAINTENANCE AND CERTAIN MISC B.R WORKS IN SMQ AREA AT AF STN, BAREILLY

Amount

Removal of existing treatment from walls/ ceilings by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for applying three coats of white wash on surfaces of walls complete all as specified and as directed.

M&L for applying three coats of white wash on surfaces of ceilings complete all as specified and as directed.

M&L for applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and as directed

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) in patches n.exc. 3sq.m. each patch on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for rendering 5mm thick with cement mortar (1:3) on concrete surfaces as on ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and as directed.

S&F 15 mm bore of galvanized steel tubing medium grade with all fittings complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified

M&L for joint free non skid coloured ceramic tiles 7-8mm thick, area of each tile exc. 0.18 sq.m but n.exc. 0.38 sq.m as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for digital coloured light shade glazed ceramic tiles of size 300 x 450mm, 7 - 8 mm thick as on vertical surface such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match the surface of tile with and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7-8mm thick, area of each tile exc. 0.11 sq.m but n.exc. 0.18 sq.m as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7-8mm thick, area of each tile exc. 0.06 sq.m but n.exc. 0.11 sq.m as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

S&F in repair bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass union of 15mm bore dia complete all as specified and as directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered ‘Hot’ or “Cold” with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore dia, complete all as specified and as directed.

S&F in repairs; 15mm bore stop valves cast copper alloy, chromium plated with long shank and cup (concealed type), fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 15 mm bore CP brass angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

S&F PVC waste pipe with adopter in any length & 32 mm dia suitable for WHB or sink complete all as specified and directed.

S&F PVC reinforced connections 450mm long x15 mm size with CP check nut and washers complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with swivel joint with and including a cast copper alloy CP shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40 gms) complete all as specified.

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x440 mm white with integral foot rests including CI "P' of S' trap and PVC flush pipe and making good to floor but excluding flushing cistern complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern but including PVC flush pipe & white sheet cover closed pattern complete all as specified and as directed.

S&F in repair EWC seat cover closed pattern type for pedestal pattern white complete including CP locking bolt complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550 x 400mm including cutting for and pinning in ends of the brackets or erecting stand complete all as specified and as directed.

S&F in repair PVC valve less, syphonic action type, low level flushing cistern, white, 10 Litres capacity, with inlet, ball valve, float and handle with and including brackets and PVC flush bend and PVC flush pipe complete all as specified and as directed.

S&F in repairs fancy type soap dish, cast copper alloy, chromium plated including chromium plated brass screws and plastic cleats complete all as specified and as directed.

S&F in repair 5.50 mm thick looking mirror of size (600x450) mm approved quality fixed to walls with suitable stain less steel brackets and screws complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight -210gm)

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area n exc 1.5 sq.m each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area exc 1.5 but n exc 4 sq.m each complete all as specified and as directed.

Taking down shutter from frame of area exc 1.00 Sq.m but not exc 2.00 Sq.m each complete all as specified and as directed.

Taking down shutters from chowkats, resecuring, or easing & adjusting & refixing in same opening of area exc 1 Sq.m but n exc 2 sq.m each shutter complete all as specified and as directed.

S & F of aluminium anodised powder coated of approved colour, sliding type three track window or ventilator with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame made of section size 92.00 X 31.75 X 1.30 mm. (ii) Shutter for top, bottom and side rails 40.00 X 18.00 X 1.30 mm. (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips of suitable size, 4 Nos. aluminium hold fasts with each window and necessary handles, tower bolt etc. as directed. (iv) Aluminium grill made of 5 mm dia powder coated aluminium section as per design No. DG-102 of make DEDO grill or design No. A-103 duly fixed with aluminium section 50 X 20 X 1.5 mm size. (v) Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of aperture 1.40 mm duly fixed with tined tacks or galvanised wire staples.

M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

S&F in repair 19/20 mm thick block board, exterior grade with decorative choice lamination on both side for cupboards, lockers, cabinets etc with necessary anchoring complete all as specified and as directed.

S&F in repair 12 mm thick block board, exterior grade with decorative choice lamination on both side for cupboards, lockers, cabinets etc with necessary anchoring complete all as specified and as directed.

M&L for flush shutters, 35mm thick solid core construction, with block board core and plywood face panels, commercial type on one side and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

M&L for 2nd class hard wood glazed and skeleton shutter 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and as directed.

S&F 100 mm long stainless steel Butt hinges with stainless steel hinge pin ISI marked complete all as specified and as directed.

S&F 75 mm long stainless steel Butt hinges with stainless steel hinge pin ISI marked complete all as specified and as directed.

S&F Continuous (piano) hinges, bright finish or electro-galvanized, mild steel 30mm width of flaps (when open) complete all as specified and as directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section ISI marked complete all as specified and as directed.

S&F in repair 300mm mild steel ordinary door springs, ISI marked including roller and roller plate complete all as specified and directed.

S&F 250mm length aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M&L 140mm length of floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square in n exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and as directed.

S&F in repair 25 mm dia CP curtain rod with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed. Note:-Measured overall as fixed along the centre line over fittings and accessories.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including MS clamps complete all as specified and directed.

S&F PVC (SWR) bends any radius of bore 110 mm complete all as specified and directed.

S&F 125 mm dia grating doom with or without waste hole of PTMT (minimum weight 40 gram) complete all as specified and as directed.

S&F in repairs hand shower (Health Faucet) (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook complete all as directed.

S&F in repair internal kit for PVC flushing cistern of 10 ltr capacity, of same make as per existing, concealed type complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repairs 25 mm wide aluminium door seal with gasket complete all as specified and as directed.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 17 of tender document i.e. Rs. 21,900.00

MESSERS KHARAK SINGH BISHT

REHAN CONSTRUCTIONS

VINOD TRADING CORPORATION