S0195/26- SITC of DG in Mortury atttached to THQ hospital under Piravom Municipality. (Retender)

OD32746/2025-2026:Supply of 15 KVA, 3 Phase, 420 V, 50 Hz, 0.8 pf liquid cooled Leypower RTU diesel generator for producing electricity with a 4-cylinder ASHOK LEYLAND CPCB 4+ engine model (H2G4DM15 ) developing 19.5 HP complete in all respects and supplied with Ashok Leyland Leypower alternator (Leroy Somer )and CPCB-approved acoustic enclosure, Standard control panel, battery, leads and a integrated fuel g. Fuel filter. h. Lubricating oil filter. i. Exhaust silencer. j. Exhaust Muffler k. Battery Charger/Generator "Engine Instrument Panel a. Starting switch with key or button" b. Lubricating oil pressure gauge. c. Water temperature gauge. d. RPM Indicator with hour meter. e. Battery charging ammeter. "Safety Controls for Engine a. Trip for low lubricating oil pressure." b. Trip for high water temperature. "Brushless Alternator a. Make - LS/KEL/Stamford/ LEYPOWER" b. Type - Self exited and self regulated. c. Capacity15KVA @ 0.8 PF d. System of Voltage -single Phase, 420 V,50Hz e. Speed - 1500 rpm. f. Voltage regulation band - +/- 5% of rated voltage g. Frequency : 50 Hz h. Insulation - Class F / H The alternator should confirm to IS 4722 and warranteed for 3 years.Operation and service manual , spares and tools shall be provided. "Fuel Tank Suitable size built in type integrated with the acoustic enclosure with full tank Diesel" Fuel connection shall be done as per standards "Battery Suitable capacity fully charged battery with leads and terminals of appropriate AH capacity as per Manufactures requirement." 10. Supplying and providing Automatic Battery charger suitable for the 15 KVA DG set 11.Tools Kit Standard control panel including all necessary accessories and meters Accoustic enclosure: As per CPCB norms The DG set should have warranty of 3 years from the date of installation.

90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

OD32754/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. 63A 4 pole ON-load Change over switch.

2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.17:Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.