PERIODICAL SERVICES TO WATER SUPPLY AND EM INSTALLATIONS UNDER GE UTILITY AMBALA CANTT

Amount

Material and labour for cutting and uprooting of tree roots, unwanted vegetation on roof and wall surfaces by digging safely in concrete roof or brick wall and pouring acid or approved chemical to avoid further growth of roots and making good the surfaces by filling cracks and disturbed portion in cement mortar (1:3) or PCC 1:2:4 type B-0 (using 12.5mm size crushed stone aggregate) 25 mm thick without using extra cement, complete all as specified.

M & L Preperation of old decorated plastered or unplastered surfaces of walls,chajjas,balcony,facias etc by brooming down with steel wire brushes,scraping down smoke soot, moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of oil bound distemper complete all as specified and directed.

Material and Labour for preperation of old decorated plastered or unplastered suraces of walls of over head tanks/bldgs by complete brooming down with steel wire brush,scraping down smoke and applying one coat of cement base paint complete all as specified. Note- Contractor shall quote their rates considering upto 30 M height of tank staging.

Material and Labour preperation of old decorated surfaces of walls chajjas balcony facia etc and applying two coat of exterior emulsion paint complete all as specified.

Material and Labour preperation of old decorated brick/concrete, plastered or unplastered surfaces of walls,pillars cornices etc by brooming down with steel wire brush,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of white wash on the walls pillars,cornicess etc complete all as specified and directed.

Material and Labour preperation of old decorated brick/concrete, plastered or unplastered surfaces of ceiling by brooming down with steel wire brush,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc. and applying one coat of white wash on ceiling complete all as specified and directed.

Material and Labour preparing old decorated wooden suraces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and Labour preparing old painted steel suraces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for keys, scrubbing down with water etc. of any thickness including dado any description, complete all as specified and as directed.

Material and Labour 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour 15mm thick rough cast plaster over and including 10mm thick base rendering in cement mortar (1:4) on brick or concrete surface of any description with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. Note: WPC shall be measured and paid separately.

Material and Labour 15mm thick rendering in cement mortar (1:4) with WPC @2% by weight of cement on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour rendering 10 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement.

Supply only integral water proofing compound.

Material and Labour preparation of new plastered surfaces and applying three coats of white wash on wall, complete all as specified and directed.

Material and Labour preparation of new wall surfaces and applying two coats of cement base paint over a one coat of cement primer. Complete all as specified and directed.

Material and Labour preparation of new plastered surfaces on ceiling and applying three coats of white wash etc. complete all as specified and directed.

Writing letters or figures (Block. Roman, Italic or Indian) with thick paint n exc. 30 cm high complete all as specified and directed.

Writing Stops, coomas,short lines,dashes,hyphens,brackets with thick paint etc

Material and Labour for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks, from the joints. Prepared surface should be washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. Note Further treatment over the surface so achieved will be carried out only after approval of the same by GE

Providing technically qualified person (Engineer) for preparation of PSMB including carrying out of measurement of old Bldgs as per normal Engineer practice falling under the area of AGE B&R-II under GE (South) Ambala Cantt. Also providing necessary documents (e.g stationary items etc.) for preparation of PSMB, entering site measurement of following items in PSMB as per the format kept in Sub Division:- (a) White wash in ceiling surfaces. (b) White wash in wall surfaces. (c) OBD on wall surfaces/dry distemper. (d) Interior emulsion (Plastic paint) on wall surfaces. (e) Cement base paint on wall surfaces. (f) Exterior emulsion paint on wall surfaces. (g) Synthetic enamel paint on wooden surfaces. (h) Synthetic enamel paint on steel surfaces. (j) Varnish. (k) Small article paint steel/wooden. This item includes submission of PSMB building wise falling under AOR of AGE B&R-II under GE (South) Ambala duly scrutinized and signed by JE (Civil) and Engineer-in-Charge and Numbered and audited by Audit authorities. Notes 1. The above PSMB shall be prepared by Engineer having minimum qualification diploma in Civil Engineering from approved Technical Institute alongwith minimum work experience of three years. Details of qualification and experience shall be varified and kept on record by Engineer-in-Charge. 2. PSMB shall be submitted by the contractor before submission of 1st RAR of above work complete in all respect duly signed and audited. 3. The contractor shall be paid for square meter of periodical items worked out in PSMB as per plinth area of particular bldg. 4. Necessary security pass shall be issued by Engineer-in-Charge in favour of Engineer being appointed by the contractor for the purpose on the basis of particular submitted by the contractor in writing alongwith Police Verification with regard to Character and antecedents of the Engineer. 5. Irrespective of above, in few bldg where complete periodical services are not carried out (Only 2 or 3 items are executed) contractor will prepare PSMB for entire bldg covering all items as mentioned above irrespective of items executed by him as per direction of Engineer-in-Charge. 6. In case of repetitive nature of bldgs where work has been executed by the contractor the payment shall be made only for area to be measured at first instant. No repetition of area shall be allowed and taken into consideration of payment purposes.

Note :- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Kang Builders