84-4059-01-051-51-Administration of Justice Buildings for Legal Department

Name of work: Providing and Erecting E.I. and Necessary Switchgear iteams in Registrar Rooms, Stenographers

Rooms, Branches and Staff Rooms in Court Building of Rajkot, Jamkandorana , Padadhari , Upleta

Bhayavadar , Vinchiya , Jasdan , Dhoraji , Jetpur & Gondal .

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

Qty. Unit estiamted

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

1 230 Pt covered with appropriate front plate modules erected on / in 853.45

wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(a) with medium class

Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

providing and erecting Mains with 1.1 kV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories (i) 4 wire

(use earth wire of 4 sq.mm )

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

4 17 Ea MCBs.(The DBs should be used of same company of MCB to 2913.85

be used) suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii)6 way

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (iii)8 way

(A) single phase incoming and horizontal single phase

5 Ea outgoing (b) sheet steel double door (IP-43) (b) sheet steel 1492.78

double door (IP-43)

Plastic enclosure fitted with DIN rail suitable for incorporating

One / Two nos. MCB

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(c)63 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

7 96 Ea single phase 240 V,50Hz. having characteristic of quick action 2458.34

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

Qty. Unit estiamted

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for 1.1 kV.

8 600 Mtr to be laid on wall with necessary clamps or in existing trench 1689.73

/ pipe of following size of cables (J) 3 1/2 core 300 Sq.mm (

150 Sq. mm 1/2 core)

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A. with

9 1 Ea variable Thermal & magnetic release suitable to work on 27751.77

A.C.supply 50 Hz. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A. with

variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III with

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A. with

variable thermal & magnetic release suitable to work on

A.C.supply 50 Hz. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

2 Ea With Enclouser 25345.243

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp.

/ sq.mm (Rated current / cross section area) duly wrapped with

12 1 Rn.Mtr colour insulating tape for phase sequence of following current 7319.47

carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.(D) Suitable for

2 Rn.Mtr (C) Suitable for 300 Amp. capacity 4909.61

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

Qty. Unit estiamted

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams)

2.707 Sq.mtr The panel shall be supplied with following approved 14902.55

manufacturers with following size. (B) The standard

companies switch gear shall be used and only manufacturers at

CPRI approved factory (i) with 350mm depth

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

15 6 Ea insulated armoured cable complete with out going tails, 280.78

insulating tape etc for following size of cables. (I) 3 & 1/2

core 300 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

16 24 Ea pressure tool & connected to switchgear terminals with 98.98

brass/cadmium plated nut bolts in an approved manner. (K)

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground /

road surface for enclosing cable (C))90 mm outer dia

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

Qty. Unit estiamted

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

19 3 Ea Volts range erected on existing panel board with all 1275.63

connection, wiring etc .with manufacturers calibration

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate on

500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

Supplying and erecting Ammeter / Voltmeter selector switch

21 6 Ea for 3 phase AC Supply 500 V on existing panel board with 317.14

necessary connections.

Providing & erecting L.T. Current Transformer with bar

primary 50/5 to 1000/5 ratio 15 VA burden erected in existing

CRCA box duly secured with insulating materials connected to

Supplying and erecting approved make suitable panel indicator

23 9 Ea LED type lamp, lens cover, complete erected with necessary 43.43

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

24 12 Mtr erected in existing pipe of following size (Specifically for 1473.59

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.. (m) One wire 120.00 sq. mm

112 Mtr (g) One wire 16.00 sq. mm 177.76

Note:- The Credit of dismentalled materials for Rs.00.00 shall be recovered from the First R.A. bill payable to the contrator

and there after the dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in

figures)_____________________________________percent Above / below (in words) the estimated rates mentioned above amount

of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local

situation regarding material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications

and other tender documents of this work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the

instruction of Competant Authority on Tender Submitted rate,No Excuse will be Accepted.Hence Contractor

are Requested to quote the rate considering this condition.

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

Qty. Unit estiamted

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of

grant.Contractor has to start the work immediately after issue of Work Order and as per instruction of Engineer-

in-Charge irrespective of availibility of grant.

E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid

to the agency as per existing guidelines."

(Signature of the Contractor)

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be