Providing LWSS Kando Cheog GP Kando Cheog in Tehsil Kamroo District Sirmour HP)

Amount

Excavation in foundations and trenches etc, in earth work, lift up to 1.5mtrs stacking the excavated soil not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth of foundations etc, consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated earth as directed within a lead of 20mtrs, in all kind of soil in P.W & J.W. 50% each.

Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app.graded stone agg. 40mm nominal size) and curing complete excluding the cost of form work in foundation & plinth in all height and depth including all leads lifts and carriage of material at site and as directed by the Engineer in charge.

Providing and laying cement concrete 1:6:12 ( 1 cement:6 sand :12 gaded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth.

Random rubble masonry / polygon rubble masonry (Uncoursed/ brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concerete 1:6:12 (1Cement:6 Sand : 12 Graded stone aggrete of 20 mm nominal size) in cement mortar 1:6 (1cement:6Sand ) in foundation and plinth.

Providing and laying Damp proof course 38mm thick with cement concrete 1:2:4 (1 cement 2 sand 4 graded stone aggregate 12.5mm nominal size) at plinth level and curing

1st class brick work using common burnt clay building bricks in supper structure in cement mortar1:6 (1cment:6 sand)

Providing form work with steel plates 3.15mm thick and welded with angle iron frame of 30x30x5mm so as to give a frame of fair finish including centring, shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu reinforced concrete and plain concrete work in, floors etc. up to 200 mm in thickness.

(b) Vertical surface such as walls (any thickness)

Providing and laying cement concrete 1 :1.5:3 ( 1 cement :1.5sand :3 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels, beams, girders, bressumers, and cantilever, up to floor two level.

(b) Wall (any thickness but not less then 0.10 thick) attached pilasters, buttress and the like

Providing and laying cement concrete 1:2:4 [ 1 cement:2 sand :4 graded stone aggregate 20mm nominal size] and curing complete excluding cost of form work and reinfocement for reinforced cement concrete work in suspended floors, roofs,landing and shalves, and their support balconies, beams, and girders, bressumers and cantilever up to floor two level

Providing form work of ordinary timber planking so as to give a rough finish i/c centering shuttering proping etc., height of proping and centering below supprorting floor to ceiling not exceeding 4 mtr.and removal of the same in-situ reinforced concrete and plain concrete work in Arches beyond 6.00 mtrs span complete in all respect.

Supplying and fixing cast iron cover with frames for main holes of size 455mm internal dia meter C.I. Cover (Medium) duty the weight of cover to be not less than 23 kg including all leads, lifts and carriage of material at site and as directed by the Engineer in charge.

Providing Mild steel/Tor steel reinforcement for R.C.C. work including bending binding and placing in position complete up to floor two level Tor steel

Supplying and fixing cast iron cover with frames for main holes of size 455mm internal dia meter C.I. Cover (Medium) duty the weight of cover to be not less than 23 kg including all leads, lifts and carriage of material at site and as directed by the Engineer in charge.

Fixing of GI pipe 50m dia for scour, inlet, outlet and overflow etc.

Proving and fixing M.S. foot rest of 22mm dia size including embedded in C.C in block 225 mm X 225mmX75mm including all leads and carriage of material at site as per direction of Engineer in Charge

Steel work Welded in built up section, trusses,and framed work including cutting,hoisting in position and applying a priming coat of red lead paint in grating framed guard bars,ladders,ralling brackets and similar work. Including all leads lifts and carriage of material at site or as directed by the engineer in charge.

Prov. and ploring in horizontal layers filtering media duly graced, screened, washed and cleaned as specified by Engineer in charge.

i)Top layer fine sand (effective size 0.20mm to 0.40 mm and uniformity 3.00)

ii)2nd layer coarsed sand ( coarse sand 3mmm to 6 mm)

iii)3rd layer 6mm to 20mm

iv)4th layer Bajri 20mm to 25mm

v)5th layer Broken stone( 50mm to 75 mm)

Providing wood work in form of door, window,CS windows and other framed rough framed and fixed wing position (2nd class deodar wood)

Providing & fixing panelled glazed or panelled & glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in 2nd class deodar wood (40 mm thick)

15 mm cement plastering in single coat on rough side of brick/stone masonary for interior plastering up to floor two level including arrises internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in in girth and finished even and smooth in C.M.1:6(1Cement:6 Sand)

6 mm cement plastering to ceiling in cement mortar 1:3 (1Cement :3 Sand) including all leads lifts and carriage of material at site and as directed by the Engineer in Charge.

White washing with lime on un-decorated walls surfaces two coats to give an even shade including thoroughly brooming the surfaces to remove all dirt and dust and other foreign matter

Pointing on brick masonary wall with cenent mortor 1:3 (1cement :3 sand)

Cement concrete flooring 1:2:4 [ 1 cement :2 sand :4graded stone aggregate 20mm nominal size] laid in one layer finished with a floating coat of neat cement 40mm thick.

Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter and sand papering and knotting ready mixed paint brushing stell primer red oxide paint.

Painting one coat ( excluding priming coat) on new wood and wood based surfaces with ready mixed paint all dirt and dust and other foreign matter sand papering and knotting ready mixed paint other than white.

Providing plinth protection 40 mm thick in cement concrete 1:3:6 ( 1 cement :3 sand :6 gaded stone aggregate 20 mm nominal size ) including finishing the top surfaces of concrete smooth.

Providing of Brick layer in CM 1:3 in inner Drain

Providing 40x3mm flat iron hold fast 40 Cm long including fixing to frames 10mm diameter bolts and nuts and wooden plug and embended in cement concrete block 30x10x15 Cm. In1:3:6 (1 cement :3 sand :6 gradedstone agg. 20mm nominal size)

Providing and fixing Mild steel sliding door bolts with

nuts screws etc. 300x16mm.

P/F Tower bolts [ barrel type ] 160x10mm

P/F Mild steel handle with screws 100mm.

Suneel Dutt

anil chauhan

BHAW SINGH KAPOOR CONTRACTOR