Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC 4 A RUKSHMANI PARK SOCIETY OPP SAMA WATER TANK NEW SAMA ROAD VADODARA 390 008 | VADODARA | VADODARA | GUJARAT | 390008 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹14.6 L+₹1.6 L (12.0%)Rejected-Finance G 16 JAY COMPLEX BELOW UMA CO OP BANK NIZAMPURA VADODARA 390 002 | VADODARA | VADODARA | GUJARAT | 390002 | L2 | Rejected-Finance BEING L2 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BARODA
GE AF BARODA PO DARJIPURA BARODA 390022
REPAIR AND MAINT OF BLDGS AT HARNI / HARNI AIRFIELD AT MAKARPURA AT AF STN BARODA
2022_MES_565890_1
8759/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF BARODA
AS PER TENDER DOCUMENTS AND NIT
3 documents required · 3 mandatory
₹500
GE AF BARODA
₹30,000
Yes
2 Mar 2023
29 Nov 2022
29 Dec 2022
29 Nov 2022
27 Dec 2022
15 Dec 2022
30 Nov 2022 - 8 Dec 2022
Amount
Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement Concrete (Reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness Laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L Plain Cement concrete type C-2 1:3:6 (using 40mm stone aggregate) as in surface channels and drains finished surfaces even and smooth using extra cement complete all as specified and directed.
M&L for PCC type B-0 1:2:4 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges complete all as specified and directed.
M&L for PCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in coping etc complete all as specified and directed.
M&L for RCC type A-1 1:1.5:3 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC type A-1 1:1.5:3 (using 20mm graded stone aggregate) as in Chajjas complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L Brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Cutting chases in brick walls, for concealed water tubing , etc., and making good in CM 1:3, cutting exc 10 cm and n.exc 20cm girth complete all as specified and directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win-dow-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed.
M&L 2nd class HW Plain fillets, square, Rectangular or triangular in section, clean sawn, secured with nails or brads etc sectional area not exc 3 sqcm complete all as specified and directed.
M&L 2nd class HW Plain fillets, square, Rectangular or triangular in section, clean sawn, secured with nails or brads etc sectional area exc 3 sqcm and n.exc 6 sqcm complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutter from the frame) not exc. 1.5 sq. m each and removing to store complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutter from the frame) exc. 1.5 sq. m and n.exc 4.00 sqm each removing to store complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 2 sqm each complete all as specified and directed.
S&F (in repair) 100 mm Aluminium anodised barrel tower bolts of extruded section including screws complete all as specified and directed.
S&F (in repair) 150 mm Aluminium anodised barrel tower bolts of extruded section including screws complete all as specified and directed.
S&F (in repair)300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F (in repair) Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed.
S&F (in repair) 75mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F (in repair) 100mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F (in repair) continuous piano hinges mild steel bright finish or electrogalvanised width of flap 30mm (when open) complete all as specified and directed.
S&F (in repair) 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F (in repair) 100mm size Aluminium handles, cast type, anodized complete all as specified and directed.
S&F (in repair) 150mm size Aluminium handles, cast type, anodized complete all as specified and directed.
S&F (in repair) Mortice lock Mild steel vertical type size 100mm 2 levers fixed to wooden or Aluminium door shutters complete all as specified and directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finish complete all as specified and directed.
S&F (in repair) 100mm Aluminium anodised Hasp and staple, safety type with mild steel hinge pin incl bolts to hinge plate and fixed with screws complete all as specified and directed.
S&F SS tubular towel rail 20mm dia 60cm long with brackets complete all as specified and directed.
S&F (in repair) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length 150mm complete all as specified and directed.
S&F (in repair) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F (in repair) Galvanised iron wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M& L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L, Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally tor hooping for columns. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L, Mild steel bars 5mm dia and over upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally tor hooping for columns. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders etc complete all as specified and directed.
Welding in repair n exc 2.5cm in length and thickness of metal to be welded exc 6mm and n exc 9mm complete all as specified and directed.
Welding in repair exc 2.5cm and n exc 5cm in length and thickness of metal to be welded exc 6mm and n exc 9mm complete all as specified and directed.
M&L aluminium frames and shutters powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in. roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F (in repair) 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work such as door shutters etc complete all as specified and directed.
S&F (in repair) 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work such as door shutters etc complete all as specified and directed.
S&F (in repair) 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed with screws to timber frame work complete all as specified and directed.
S&F (in repair) 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete all as specified and directed.
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed as backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
M&L Plain cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in 25mm thick sub base of flooring finished surfaces rough to receive floor finishes, complete all as specified and as directed.
M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and rough to receive the flooring etc without using extra cement, complete all as specified and directed.
M&L Plain cement concrete type B-2 1:2:4 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and as directed.
M&L Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular ) matching area of each tiles exc 0.06 sqm but not exc 0.11 sqm in vertical surface set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM 1:6, complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in vertical surface set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM 1:6, complete all as spd.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular ) area of files exc 0.18 sqm but not exc 0.38 sqm matching shade set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (light shade doubly charged), area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thcik screed bed in CM 1:6 complete all as specified and directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (light shade doubly charged), as in skirting, dado etc with matching to item No 68.00 above set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thcik screed bed in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15mm thick on other than fair faces of brick work or stone surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately), complete all as specified and directed.
M&L Rendering 15mm thick on other than fair faces of brick work or stone surfaces in CM 1:4, finished even and smooth without using extra cement but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately), complete all as specified and directed.
M&L rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately),complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L, Preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over and including a priming coat, complete all as specified and directed
M&L, Preparation of old plastered surfaces of walls and applying two coats of Oil Bound Distemper by complete removal of existing treatment incl washing rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.
M&L, Preparation of old plastered surfaces of walls and applying one coat of Oil Bound Distemper complete all specified and directed.
M&L, Preparation of newly plastered surfaces of walls and applying two coats of Cement Base paint over and including a priming coat, complete all as specified and directed.
M&L, Preparation of old plastered surfaces of walls by complete removal of existing treatment incl washing rubbing down and stopping of painted surfaces and applying two coats of Cement Base paint complete all as specified and directed.
M&L, Preparation of old plastered surfaces of walls and applying one coat of Cement base Paint complete all as specified and directed.
M&L, Preparation of newly plastered surfaces of Ceiling and applying two coats of Cement Base paint over and including a priming coat, complete all as specified and directed.
M&L, Preparation of old plastered surfaces of Ceiling by complete removal of existing treatment incl washing rubbing down and stopping of painted surfaces and applying two coats of Cement Base paint complete all as specified and directed.
M&L, Preparation of old plastered surfaces of Ceiling and applying one coat of Cement base Paint complete all as specified and directed.
M&L, Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L, Preparation of newly plastered surfaces of walls and applying three coats of white wash , complete all as specified and directed.
M&L, Preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
S&F 4mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beads in square exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty or wooden beads in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 5mm thick tinted glass fixed with and incl necessary rubber gasket and aluminium beading all as directed. Note : cost of rubber gasket and aluminium beading are deemed to be included in quoted rates complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputtying and painting/ oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed.
Ditto, but securing glass in metal frames complete all as specified and directed.
M&L Preparation of old wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparation of old steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F 15mm bore Tubes,'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore Tubes,'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 25mm bore Tubes,'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.
Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.
Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.
Dismantling water tanks and removing to store Exc 250 & n exc 500 complete all as specified and directed.
Dismantling water tanks and removing to store Exc 500 & n exc 1000 complete all as specified and directed.
Dismantling water tanks and removing to store Exc 1000 & n exc 2000 complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks exc 250 and n.exc 500 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks exc 1000 and n.exc 2000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F in repair PVC water storage tank cover for 500/1000 ltr capacity with pvc nut and bolt and fixing arrangement complete all as specified and directed.
S&F in repair 15mm dia Bib taps fancy type CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm dia Bib taps CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm dia Pillar laps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm dia angle Stop cock, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed one end for iron pipe and other end for PVC connection pipe complete all as specified and directed.
S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair 20mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair 25mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair 32mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair 40mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair 15mm dia bib tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-105gms) complete all as specified and directed.
S&F in repair 15mm dia Pillar tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed.
S&F in repair 15mm dia stop cock standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed.
S&F in repair 15mm dia angle stop cock standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed.
S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals. (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.
S&F in repair 32 mm bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and directed.
Dismantling cast iron soil waste and vent pipes of dia 75mm including all fittings of any description and in any position complete all as specified and directed.
Dismantling cast iron soil waste and vent pipes of dia 100mm including all fittings of any description and in any position complete all as specified and directed.
S&F 75mm bore Cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F 100mm bore Cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F in repair Stack clamps for 75mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F in repair Stack clamps for 100mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and flush pipe) complete all as specified and directed.
S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and including flush pipe) complete all as specified and directed.
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F in repair Vitreous Cliina wash basin, while, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F in repair 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair Flush pipes to pedestal pan, including all joints complete all as specified and directed.
S&F in repair flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed.
S&F in repair 25mm dia Stainless steel tubular curtain rod incl fancy type brckets both side fixed complete all as specified and directed.
S&F single mirror bathroom cabinet moulded body and frame (made of strong and fine quality ABS) with hanged door (Size 16"x12") white in colour make as approved by GE fixed to wall with appropriate rowl plugs complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair jet spray ss complete set for EWC complete all as specified and directed.
S&F in repair plastic seat cover for pedestal pan WC white in colour with flat bottom incl chromium plated hinging divice complete all as specified and directed.
S&F in repair stainless steel bright finish round shape 100mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed.
All as per item No 170.00 but 125mm size with access hole for inserting waste pipe etc complete all as specified and directed.
S&F in repair shower rose brass chromium plated 125mm size complete all as specified and directed.
S&F in repair stainless steel bolts and nuts including necessary washers as in WHB brackets incl refixing WHB with white cement complete all as specified and directed.
S&F in repair health faucet of approved quality complete all as specified and directed.
Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.
Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.
S&F 16mm dia Brass Elbow complete all as specified and directed.
S&F 20mm dia Brass Elbow complete all as specified and directed.
S&F 20mm dia Brass Elbow (3/4 X ½) complete all as specified and directed.
S&F 16mm dia Brass Tee complete all as specified and directed.
S&F 20mm dia Brass Tee complete all as specified and directed.
S&F 16mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.
S&F 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.
S&F 16mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.
S&F 20mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F PVC waste pipe 32mm size with PTMT nuts of length 600mm for wash hand basin/urinal/sink etc complete all as specified and directed.
City Light
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .