WBPWD/EE/BED/e-NIQ-56/2025-26

Amount

Supply and fixing of 75mm x 75mm square tube, 6 mm thick mild steel by using electrical welding machines in place of damaged potion by co’s own tools and tackle’s.

Dismantling the existing 2.5 ft glow sign letter ( English) very carefully for reused the same after cleaning by co’s own tools and tackles.

Supply and fixing of vinyl laminate printed of RAMP/BLOCK/A1 to D3 in different colour combination (as per direction by EIC) and presting by using outdoor Fevikwik on existing ACP bord

S&F of (GE/ Samsung/ Osram) lamp (1.5W) Single run for upper letter and lower letters and logo included best quality LED lighting arrangement to be fixed by proper arrangement with complete connection.

Making one set of scaffolding arrangement for fixing the glow sing board. S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in charge.

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as to GS. A) One coat of red lead/Zinc chromate priming. B) 1st coat of aluminium paint over one coat of RO priming C) 2nd coat of aluminium paint over 1st coat.

Supply and fixing of 5 inch fastener with bolt and washer etc.

Supply & Installation of Aluminium Composite Panel (ACP) board ( 7mm thick) of Aludecor/Alstone,) as per direction EIC .

Supply, fabrication & erection of GI sheet ducting complete with support, hangers etc. as required. A) 22 SWG

Supply & fixing of duct acoustic insulation with 12MM thick rigid board covered with 30 SWG Aluminium perforated sheet incl. necessary nuts, bolts, etc. as required.

Repair and replacement of damaged part of MS grill guard and platform and painting of 5’x4’ (3 side Railing) in size MS Platform made by M.S. Channel,angel & flats with (approx 3”) square gapping for the installation of outdoor Unit of split type A.C. Machine.The Platform are made with M.S Channel of size -75x75x8 mm for support of both side 7 middle of the platform also the channel are partly painting and placing inside the wall. The platform constructed by M.S. angel iron frame of by 50x50x6mm in required size incl. 8 nos. support cross wise form wall to frame for proper resting the platform. More over to complete the Platform by proper placing & by M.S. flat of size -19x6 mm with 3” square gapping (approx) over M.S. angel iron frame with & and 3 side grilling arrangement by angel frsme etc. Proper painting the platform by two coats of after proper scraping byb emery paper for smooth finish as per requirement & direction of E.I.C.

Charges for reparing, welding, the iron structure of grill guard & tray of with proper arrangement as per direction of EIC.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

S T ENTERPRISE (BID ID -6820305)

A.K.ENTERPRISE (BID ID -6820318)

M/s Singh Electrical Works (BID ID -6823691)